joint leakage

简明释义

连接泄漏

英英释义

例句

1.The plumber was called to fix a problem with the sink due to joint leakage.

水管工被叫来修理水槽的问题，因为存在接头漏水。

2.To prevent joint leakage, it's important to use high-quality sealing materials.

为了防止接头漏水，使用高质量的密封材料是很重要的。

3.During the inspection, we discovered joint leakage in the pipes that needed immediate attention.

在检查过程中，我们发现管道中存在接头漏水，需要立即处理。

4.After the heavy rain, we noticed joint leakage in the basement walls.

大雨过后，我们注意到地下室墙壁上有接头漏水。

5.The maintenance team worked overnight to repair the joint leakage in the water supply system.

维修团队通宵工作，修复供水系统中的接头漏水。

作文

In the realm of engineering and construction, the term joint leakage refers to the unintended escape of fluids or gases from the connections between two components. This phenomenon can occur in various systems, including plumbing, HVAC, and structural applications. Understanding joint leakage is crucial for ensuring the integrity and efficiency of any system that relies on sealed joints to function properly.One of the primary causes of joint leakage is improper installation. When components are not aligned correctly or when seals are not applied uniformly, gaps can form, allowing fluids or gases to escape. For instance, in plumbing systems, if pipes are not joined at the correct angle or if the sealing materials are not used adequately, water can leak from the joints, leading to significant water damage and increased utility bills.Another factor contributing to joint leakage is wear and tear over time. As materials age, they can become brittle or corroded, which compromises their ability to maintain a tight seal. In industrial settings, where high-pressure systems are common, even minor leaks can lead to catastrophic failures. Therefore, regular maintenance and inspection are essential to identify potential issues before they escalate into serious problems.The implications of joint leakage extend beyond immediate physical damage. In many cases, leaks can lead to environmental hazards, especially when dealing with hazardous materials. For example, a leak in a chemical processing plant could result in toxic substances entering the environment, posing risks to both human health and wildlife. Thus, preventing joint leakage is not only a matter of efficiency but also a critical aspect of safety and environmental protection.To mitigate the risks associated with joint leakage, engineers and technicians employ various strategies. One effective approach is the use of advanced sealing technologies that provide better resistance to pressure and temperature fluctuations. Additionally, employing regular testing methods, such as pressure testing and leak detection systems, can help identify leaks early in their development.Education and training for personnel involved in installation and maintenance are also vital. By understanding the principles behind joint leakage and the best practices for preventing it, workers can significantly reduce the likelihood of leaks occurring. This proactive approach not only saves money in the long run but also enhances the overall reliability of the systems in place.In conclusion, joint leakage is a critical issue that affects various industries and applications. By recognizing its causes, implications, and preventive measures, stakeholders can work towards creating more efficient and reliable systems. Whether in a residential plumbing system or a large-scale industrial operation, addressing joint leakage is essential for maintaining safety, performance, and sustainability.

在工程和建筑领域，术语joint leakage指的是流体或气体从两个组件之间的连接处意外逸出的现象。这种现象可以发生在各种系统中，包括管道、暖通空调（HVAC）和结构应用。理解joint leakage对于确保任何依赖密封接头正常运行的系统的完整性和效率至关重要。joint leakage的主要原因之一是安装不当。当组件未正确对齐或密封材料未均匀施加时，可能会形成间隙，从而允许流体或气体逸出。例如，在管道系统中，如果管道没有以正确的角度连接，或者未充分使用密封材料，水可能会从接头处泄漏，导致严重的水损害和增加的水费。另一个导致joint leakage的因素是随着时间的推移，材料的磨损和老化。随着材料的老化，它们可能变得脆弱或腐蚀，从而削弱其保持紧密密封的能力。在工业环境中，高压系统很常见，即使是微小的泄漏也可能导致灾难性的故障。因此，定期维护和检查对于在问题升级为严重问题之前识别潜在问题至关重要。joint leakage的影响超出了直接的物理损害。在许多情况下，泄漏可能导致环境危害，尤其是在处理危险材料时。例如，化学加工厂的泄漏可能导致有毒物质进入环境，给人类健康和野生动物带来风险。因此，防止joint leakage不仅是效率问题，也是安全和环境保护的关键方面。为了减轻与joint leakage相关的风险，工程师和技术人员采用各种策略。一种有效的方法是使用先进的密封技术，这些技术提供了更好的抵抗压力和温度波动的能力。此外，采用定期测试方法，例如压力测试和泄漏检测系统，可以帮助及早识别泄漏。对参与安装和维护的人员进行教育和培训也至关重要。通过理解joint leakage背后的原理和预防最佳实践，工人可以显著降低泄漏发生的可能性。这种主动的方法不仅可以节省长期成本，还可以增强现有系统的整体可靠性。总之，joint leakage是影响各个行业和应用的关键问题。通过认识其原因、影响和预防措施，利益相关者可以努力创造更高效和可靠的系统。无论是在住宅管道系统还是大型工业操作中，解决joint leakage问题对于维护安全、性能和可持续性至关重要。