length of watertight hull

简明释义

水密船体长

英英释义

例句

1.In naval architecture, the length of watertight hull is crucial for determining the vessel's stability.

在船舶设计中，防水船体的长度对确定船只的稳定性至关重要。

2.During the inspection, the surveyor noted the length of watertight hull was not compliant with standards.

在检查过程中，检查员注意到防水船体的长度不符合标准。

3.The engineer calculated the length of watertight hull to ensure the ship could withstand heavy seas.

工程师计算了防水船体的长度以确保船只能够承受大浪。

4.To improve safety, we increased the length of watertight hull on the new model.

为了提高安全性，我们在新型号上增加了防水船体的长度。

5.The regulations specify a minimum length of watertight hull for all commercial vessels.

法规规定所有商船的防水船体的长度必须达到最低标准。

作文

The design and construction of ships involve a multitude of technical considerations, one of which is the length of watertight hull. This term refers to the measurement of the part of the ship's structure that is designed to be impermeable to water, thereby ensuring the vessel's buoyancy and safety. Understanding the significance of the length of watertight hull is critical for naval architects and marine engineers, as it directly impacts a ship's performance, stability, and overall seaworthiness.In shipbuilding, the length of watertight hull is not just a mere specification; it plays a crucial role in determining how a ship will behave in various sea conditions. A longer watertight hull can provide greater stability and buoyancy, allowing the ship to navigate rough waters more effectively. Additionally, it can enhance the vessel's cargo capacity, enabling it to carry more goods or passengers without compromising safety.However, there are trade-offs to consider. A longer length of watertight hull may also mean increased resistance in the water, which can affect fuel efficiency. Therefore, ship designers must strike a balance between length and other factors such as width, weight, and the intended use of the vessel. For instance, cargo ships may prioritize a longer hull for maximum load capacity, while speedboats might opt for a shorter hull to achieve higher speeds.Moreover, the length of watertight hull is also integral to the ship's design in terms of compartmentalization. A well-designed hull often includes multiple watertight compartments that can be sealed off in case of a breach. This feature enhances safety by preventing water from flooding the entire vessel, which could lead to capsizing. The effectiveness of these compartments is directly influenced by the overall length of watertight hull, as longer hulls may accommodate more compartments, thereby increasing safety margins.In addition to safety and performance, regulatory standards also dictate the acceptable length of watertight hull for different types of vessels. Maritime agencies around the world have established guidelines to ensure that ships meet certain criteria that protect both the vessel and the environment. Compliance with these regulations is essential for shipbuilders and operators alike, as failure to adhere can result in severe penalties or even the loss of operating licenses.As we look toward the future of maritime technology, the length of watertight hull will continue to evolve. Innovations in materials and design techniques may allow for longer and more efficient hulls that can withstand the challenges posed by climate change and rising sea levels. The integration of advanced technologies, such as computer simulations and 3D printing, could also revolutionize how we think about hull lengths and their implications for ship design.In conclusion, the length of watertight hull is a fundamental aspect of ship design that encompasses safety, performance, and regulatory compliance. As the maritime industry continues to advance, understanding this concept will be essential for anyone involved in shipbuilding or marine operations. By prioritizing the right hull length, we can ensure safer and more efficient voyages across our oceans, ultimately contributing to the sustainability of maritime activities in the years to come.

船舶的设计和建造涉及许多技术考虑因素，其中之一就是防水船体的长度。这个术语指的是船体结构中设计为不透水的部分的测量，从而确保船只的浮力和安全。理解防水船体的长度的重要性对于海军建筑师和海洋工程师至关重要，因为它直接影响船只的性能、稳定性和整体适航性。在船舶建造中，防水船体的长度不仅仅是一个简单的规格；它在确定船舶在各种海况下的表现方面发挥着关键作用。较长的防水船体可以提供更大的稳定性和浮力，使船只能够更有效地在恶劣的水域中航行。此外，它还可以增强船舶的货物容量，使其能够在不妨碍安全的情况下运输更多的货物或乘客。然而，需要考虑权衡。较长的防水船体的长度也可能意味着在水中的阻力增加，这会影响燃油效率。因此，船舶设计师必须在长度与宽度、重量以及船舶的预期用途等其他因素之间找到平衡。例如，货船可能优先考虑更长的船体以获得最大的载重能力，而快艇可能选择较短的船体以实现更高的速度。此外，防水船体的长度在船舶设计中也与隔舱设计密切相关。设计良好的船体通常包含多个可以密封的防水舱室，以防止泄漏。这一特性通过防止水淹没整个船只来增强安全性，否则可能导致倾覆。这些舱室的有效性直接受到整体防水船体的长度的影响，因为较长的船体可能容纳更多的舱室，从而增加安全边际。除了安全性和性能外，监管标准还规定了不同类型船舶可接受的防水船体的长度。全球各地的海事机构已建立指导方针，以确保船舶符合某些标准，从而保护船只和环境。遵守这些法规对船舶制造商和运营商至关重要，因为未能遵守可能导致严重的处罚，甚至失去运营许可证。展望未来，防水船体的长度将继续发展。材料和设计技术的创新可能允许更长和更高效的船体，以应对气候变化和海平面上升带来的挑战。先进技术的整合，例如计算机模拟和3D打印，也可能彻底改变我们对船体长度及其对船舶设计影响的思考。总之，防水船体的长度是船舶设计的一个基本方面，涵盖安全性、性能和合规性。随着海事行业的不断进步，理解这一概念对任何参与船舶建造或海洋运营的人来说都将是必不可少的。通过优先考虑合适的船体长度，我们可以确保在我们的海洋上进行更安全、更高效的航行，最终为未来几年的海事活动的可持续性做出贡献。