jacket-cooling water

简明释义

缸套冷却水

英英释义

例句

1.The engine relies on the flow of jacket-cooling water to maintain optimal operating temperatures.

发动机依赖于流动的夹套冷却水来保持最佳工作温度。

2.We need to flush the system to remove any debris that might clog the jacket-cooling water lines.

我们需要冲洗系统，以去除可能堵塞夹套冷却水管道的任何杂物。

3.During the test, we monitored the temperature of the jacket-cooling water to ensure it stayed within safe limits.

在测试过程中，我们监测了夹套冷却水的温度，以确保其保持在安全范围内。

4.The technician adjusted the valves to optimize the flow of jacket-cooling water in the system.

技术员调整了阀门，以优化系统中夹套冷却水的流动。

5.An increase in the temperature of the jacket-cooling water could indicate a potential overheating issue.

如果夹套冷却水的温度升高，可能表明潜在的过热问题。

作文

In industrial processes, maintaining optimal temperatures is crucial for efficiency and safety. One of the essential methods employed in various machinery, especially in engines and reactors, is the use of jacket-cooling water (夹套冷却水). This system involves circulating water around the exterior of a vessel or engine to absorb excess heat generated during operation. The design of the cooling jacket allows for effective heat transfer, ensuring that the internal components remain within safe operating temperatures.The importance of jacket-cooling water cannot be overstated. For instance, in an internal combustion engine, overheating can lead to severe damage, including warped cylinders or even complete engine failure. By utilizing jacket-cooling water, manufacturers can prevent such outcomes by keeping the engine temperature in check. This not only extends the life of the engine but also improves its performance and fuel efficiency.In chemical processing industries, jacket-cooling water plays a vital role in controlling reaction temperatures. Many chemical reactions are exothermic, meaning they release heat. If this heat is not adequately managed, it can lead to runaway reactions, potentially causing hazardous situations. The jacket-cooling water system allows operators to maintain a stable temperature, ensuring that reactions proceed safely and efficiently.Moreover, the use of jacket-cooling water is not limited to engines and chemical reactors. It is also applied in power plants, where steam generators require precise temperature control to operate effectively. In these systems, jacket-cooling water helps manage the heat produced during the conversion of water to steam, ensuring that turbines operate at optimal conditions.Environmental considerations have also led to advancements in jacket-cooling water technology. Traditional cooling methods, such as using large bodies of water, can have significant ecological impacts. Modern systems aim to reduce water consumption and minimize thermal pollution. Innovations like closed-loop cooling systems utilize jacket-cooling water more efficiently, recycling water and reducing the overall environmental footprint.In summary, jacket-cooling water (夹套冷却水) is a critical component in various industrial applications, providing essential temperature control that enhances safety, efficiency, and environmental sustainability. As industries continue to evolve, the technologies surrounding jacket-cooling water will likely advance, further improving their effectiveness and reducing their impact on the environment. Understanding the mechanics and benefits of jacket-cooling water is vital for anyone involved in engineering, manufacturing, or environmental management, as it represents a key intersection of technology and sustainability.

在工业过程中，保持最佳温度对于效率和安全至关重要。许多机器，尤其是发动机和反应器中采用的一种基本方法是使用夹套冷却水。该系统涉及在容器或发动机的外部循环水，以吸收操作过程中产生的多余热量。冷却夹套的设计允许有效的热传递，确保内部组件保持在安全的工作温度范围内。夹套冷却水的重要性不容小觑。例如，在内燃机中，过热可能导致严重损坏，包括气缸变形甚至发动机完全失效。通过利用夹套冷却水，制造商可以防止这种结果，保持发动机温度在合理范围内。这不仅延长了发动机的使用寿命，还提高了其性能和燃油效率。在化学加工行业中，夹套冷却水在控制反应温度方面发挥着重要作用。许多化学反应是放热的，这意味着它们释放热量。如果不适当地管理这些热量，可能会导致失控反应，造成潜在的危险情况。夹套冷却水系统使操作员能够保持稳定的温度，确保反应安全高效地进行。此外，夹套冷却水的使用并不限于发动机和化学反应器。它还应用于电厂，其中蒸汽发生器需要精确的温度控制以有效运行。在这些系统中，夹套冷却水有助于管理水转化为蒸汽过程中产生的热量，确保涡轮机在最佳条件下运行。环境考虑也推动了夹套冷却水技术的发展。传统的冷却方法，例如使用大水体，可能对生态环境产生重大影响。现代系统旨在减少水的消耗并最小化热污染。像闭路冷却系统这样的创新更有效地利用夹套冷却水，回收水并减少整体环境足迹。总之，夹套冷却水是各种工业应用中的关键组成部分，提供必要的温度控制，增强安全性、效率和环境可持续性。随着工业的不断发展，围绕夹套冷却水的技术可能会进一步进步，进一步提高其有效性并减少对环境的影响。理解夹套冷却水的机制和好处对于任何参与工程、制造或环境管理的人来说都是至关重要的，因为它代表了技术与可持续性的关键交汇点。