hard-over stop

简明释义

转舵限制器

英英释义

例句

1.The technician explained that the hard-over stop is a critical point in hydraulic systems.

技术员解释说，硬转停顿是液压系统中的一个关键点。

2.When steering the boat, make sure to avoid reaching the hard-over stop to prevent damage to the steering mechanism.

操控船只时，确保避免达到硬转停顿以防损坏操纵机制。

3.The pilot was trained to recognize when the aircraft was nearing the hard-over stop during maneuvers.

飞行员接受过培训，以识别飞机在机动时接近硬转停顿的情况。

4.In a car, turning the steering wheel too far can lead to a hard-over stop, which may cause tire wear.

在汽车中，过度转动方向盘可能导致硬转停顿，这可能会造成轮胎磨损。

5.During the test drive, the driver felt the hard-over stop and adjusted their handling technique.

在试驾过程中，驾驶员感受到硬转停顿并调整了他们的操控技巧。

作文

In the world of mechanics and engineering, precision is paramount. One term that often arises in discussions about steering systems, especially in boats and vehicles, is the phrase hard-over stop. This term refers to the limit of a steering mechanism when it is turned all the way in one direction. Understanding this concept is crucial for anyone involved in navigation or driving, as it directly affects maneuverability and safety. When a vessel or vehicle reaches its hard-over stop, it signifies that the steering wheel or rudder can no longer turn further in that direction. This is an essential feature designed to prevent damage to the steering components and ensure that the operator maintains control. To illustrate the importance of the hard-over stop, consider a scenario where a boat is navigating through tight channels. As the captain turns the wheel to avoid obstacles, reaching the hard-over stop indicates that the boat has reached its maximum turning capacity. If the captain were to continue turning the wheel beyond this point, it could lead to mechanical failure or loss of control. Therefore, understanding the hard-over stop is vital for safe navigation.Moreover, the hard-over stop plays a significant role in steering dynamics. When a driver or captain knows the limits of their steering system, they can make better decisions during high-pressure situations. For instance, if a driver is aware that they are approaching the hard-over stop while attempting to make a sharp turn, they can adjust their speed and angle accordingly. This knowledge helps in preventing accidents and ensuring smoother maneuvers.In addition to safety, the hard-over stop also impacts the overall performance of a vehicle or vessel. Engineers design steering systems with these stops in mind to optimize handling and responsiveness. A well-calibrated hard-over stop allows for quick adjustments without compromising control. In racing scenarios, for example, drivers must be acutely aware of their hard-over stop to maximize their cornering abilities while minimizing the risk of skidding or losing traction.Furthermore, the hard-over stop is not just a mechanical feature; it also serves as a metaphor in various aspects of life. Just as a steering system has its limits, individuals also encounter their own hard-over stops in decision-making and personal growth. Recognizing when to stop pushing in a particular direction can lead to better outcomes and prevent burnout. In this sense, the concept of a hard-over stop transcends its technical definition and becomes a valuable lesson in balance and moderation.In conclusion, the term hard-over stop encapsulates a critical aspect of steering mechanisms that is essential for safety, performance, and decision-making. Whether on the water or the road, understanding this concept allows operators to navigate effectively while avoiding potential hazards. Moreover, the broader implications of the hard-over stop remind us of the importance of recognizing our limits in various areas of life. By respecting these boundaries, we can achieve greater success and maintain a healthy balance in our pursuits.

在机械和工程的世界中，精确性至关重要。一个经常出现在关于转向系统讨论中的术语，尤其是在船只和车辆中，就是短语hard-over stop。这个术语指的是转向机制在完全朝一个方向转动时的极限。理解这个概念对于任何参与导航或驾驶的人来说都是至关重要的，因为它直接影响到操作的灵活性和安全性。当一艘船或车辆达到其hard-over stop时，意味着方向盘或舵已经无法进一步转动。这是一个设计用来防止转向部件损坏并确保操作员保持控制的重要特征。为了说明hard-over stop的重要性，考虑一个场景：一艘船正在通过狭窄的水道航行。当船长转动方向盘以避开障碍物时，达到hard-over stop表示船只已达到其最大转弯能力。如果船长继续将方向盘转过这个点，可能会导致机械故障或失去控制。因此，理解hard-over stop对安全导航至关重要。此外，hard-over stop在转向动态中也起着重要作用。当司机或船长知道他们的转向系统的极限时，他们可以在高压情况下做出更好的决策。例如，如果司机意识到在尝试急转弯时他们接近hard-over stop，他们可以相应地调整速度和角度。这种知识有助于防止事故并确保更加平稳的操控。除了安全性，hard-over stop还影响车辆或船只的整体性能。工程师在设计转向系统时考虑到这些停止，以优化操控性和响应性。经过良好校准的hard-over stop允许快速调整而不会影响控制。在赛车场景中，例如，司机必须敏锐地意识到他们的hard-over stop以最大化他们的过弯能力，同时最小化打滑或失去牵引力的风险。此外，hard-over stop不仅仅是一个机械特征；它在生活的各个方面也作为一种隐喻。正如转向系统有其极限一样，个人在决策和个人成长中也会遇到自己的hard-over stops。认识到何时停止在某个方向上推动可以带来更好的结果，并防止精疲力竭。从这个意义上讲，hard-over stop的概念超越了其技术定义，成为平衡和适度的宝贵教训。总之，术语hard-over stop概括了转向机制的一个关键方面，这对于安全、性能和决策至关重要。无论是在水上还是在道路上，理解这一概念使操作员能够有效导航，同时避免潜在的危险。此外，hard-over stop的更广泛含义提醒我们在生活的各个领域认识到自己的极限。通过尊重这些界限，我们可以在追求中取得更大的成功，并保持健康的平衡。