gear change lever

简明释义

齿轮变速手柄

英英释义

例句

1.You need to pull the gear change lever 换挡杆 to shift into a higher gear when going uphill.

在上坡时，你需要拉动换挡杆 gear change lever来换入更高的档位。

2.Make sure to check the position of the gear change lever 换挡杆 before starting the engine.

在启动引擎之前，请确保检查换挡杆 gear change lever的位置。

3.During the test drive, I noticed the gear change lever 换挡杆 felt smooth and responsive.

在试驾过程中，我注意到换挡杆 gear change lever感觉顺畅且反应灵敏。

4.The gear change lever 换挡杆 can sometimes get stuck, preventing you from changing gears.

有时候换挡杆 gear change lever会卡住，导致你无法换挡。

5.To reverse the car, pull the gear change lever 换挡杆 back to the 'R' position.

要倒车，将换挡杆 gear change lever拉回到'R'位置。

作文

The importance of understanding vehicle components cannot be overstated, especially when it comes to the operation of a car. One such crucial component is the gear change lever, which plays a significant role in how a driver controls the vehicle's speed and power. The gear change lever is essentially the mechanism that allows the driver to change gears within the transmission system of the car. This lever can usually be found in the center console of most vehicles, and its position and function can vary depending on whether the car is automatic or manual.In a manual transmission car, the gear change lever is used to select the appropriate gear for the driving conditions. This requires the driver to engage the clutch while moving the lever into the desired position. Understanding how to properly use the gear change lever is vital for smooth driving and efficient engine performance. For instance, if a driver shifts into a higher gear too soon, the engine may stall or struggle to gain speed. Conversely, shifting too late can lead to excessive engine revs, which can cause damage over time.On the other hand, in an automatic transmission vehicle, the gear change lever typically has fewer positions, often limited to 'Park', 'Reverse', 'Neutral', and 'Drive'. The car's computer system automatically selects the best gear based on speed and engine load. However, understanding the gear change lever in an automatic car is still essential, especially when needing to switch to 'Neutral' or 'Park' in certain situations, such as when waiting at a traffic light or when parking.Moreover, the gear change lever can also impact fuel efficiency. Drivers who are familiar with their vehicle's transmission system can optimize their driving habits by using the gear change lever effectively. For example, maintaining a steady speed and shifting gears at the right time can lead to better fuel economy. Additionally, knowing when to downshift can help the driver slow down without relying solely on the brakes, which can prolong brake life and improve safety.In conclusion, the gear change lever is more than just a simple stick; it is an integral part of a vehicle's operation. Understanding its function and how to use it correctly can enhance the driving experience, improve vehicle performance, and ensure safety on the road. Whether driving a manual or automatic vehicle, familiarity with the gear change lever allows drivers to have better control of their cars, making them more confident and skilled behind the wheel. So, next time you get into a car, take a moment to appreciate the gear change lever and all it does for your driving experience.

理解车辆组件的重要性不容小觑，尤其是在操作汽车时。其中一个至关重要的组件就是换挡杆，它在驾驶员控制车辆速度和动力方面发挥着重要作用。换挡杆本质上是允许驾驶员在汽车的传动系统中换挡的机制。这个杆通常位于大多数车辆的中央控制台上，它的位置和功能可能会因汽车是自动还是手动而有所不同。在手动变速车中，换挡杆用于选择适合驾驶条件的档位。这要求驾驶员在将杆移动到所需位置时踩下离合器。了解如何正确使用换挡杆对于平稳驾驶和高效发动机性能至关重要。例如，如果驾驶员过早换入高档，发动机可能会熄火或难以加速。相反，换挡过晚可能导致发动机转速过高，随着时间的推移可能会造成损害。另一方面，在自动变速车辆中，换挡杆通常有较少的位置，通常仅限于“停车”、“倒车”、“空档”和“前进”。汽车的计算机系统根据速度和发动机负荷自动选择最佳档位。然而，了解自动车中的换挡杆仍然很重要，尤其是在某些情况下需要切换到“空档”或“停车”时，例如在交通信号灯前等待或停车时。此外，换挡杆还可以影响燃油效率。熟悉车辆传动系统的驾驶员可以通过有效使用换挡杆来优化驾驶习惯。例如，保持稳定的速度并在适当的时候换挡可以带来更好的燃油经济性。此外，了解何时降档可以帮助驾驶员减速，而不单靠刹车，从而延长刹车寿命并提高安全性。总之，换挡杆不仅仅是一个简单的杆；它是车辆操作的一个不可或缺的部分。理解其功能以及如何正确使用它可以增强驾驶体验，提高车辆性能，并确保道路安全。无论是驾驶手动还是自动车辆，熟悉换挡杆使驾驶员能够更好地控制汽车，使他们在驾驶时更加自信和熟练。因此，下次你进入汽车时，花点时间欣赏一下换挡杆及其为你的驾驶体验所做的一切。