freeboard depth

简明释义

干舷高度

英英释义

例句

1.Engineers calculated the freeboard depth 船舶的吃水深度 to determine the vessel's stability in rough seas.

工程师计算了船舶的吃水深度以确定船只在恶劣海况下的稳定性。

2.During inspections, the freeboard depth 船舶的吃水深度 is one of the key measurements taken.

在检查过程中，船舶的吃水深度是一个关键的测量指标。

3.The ship's freeboard depth 船舶的吃水深度 was measured to ensure it meets safety regulations.

船舶的吃水深度被测量以确保符合安全法规。

4.A higher freeboard depth 船舶的吃水深度 can improve a boat's performance in waves.

较高的船舶的吃水深度可以提高船只在波浪中的表现。

5.The captain checked the freeboard depth 船舶的吃水深度 before setting sail to avoid capsizing.

船长在起航前检查了船舶的吃水深度以避免翻船。

作文

The concept of freeboard depth is crucial in the field of naval architecture and marine engineering. It refers to the vertical distance between the waterline and the upper deck level of a ship or boat. Understanding this measurement is important for several reasons, including safety, stability, and design efficiency. The freeboard depth plays a significant role in determining how much weight a vessel can carry without compromising its buoyancy. When designing a vessel, engineers must consider the freeboard depth to ensure that it adheres to safety regulations. A higher freeboard depth means that the vessel is less likely to take on water during rough seas, which is essential for the safety of the crew and cargo. For instance, ships that operate in storm-prone areas often have a greater freeboard depth to minimize the risk of flooding and capsizing. This aspect of design not only enhances safety but also contributes to the overall performance of the vessel in various sea conditions.Moreover, the freeboard depth is a critical factor in the stability of a vessel. A well-calculated freeboard depth ensures that the center of gravity remains low, which is vital for maintaining balance during navigation. If a vessel has insufficient freeboard depth, it may become unstable, leading to dangerous situations such as listing or rolling excessively. Therefore, naval architects meticulously analyze the weight distribution and the freeboard depth to achieve an optimal balance that enhances the vessel's seaworthiness.In addition to safety and stability, the freeboard depth also affects the aesthetic and functional aspects of a vessel. A vessel with an appropriate freeboard depth not only looks more balanced but also performs better in terms of fuel efficiency and speed. When the freeboard depth is too low, a vessel may experience increased drag as it moves through the water, leading to higher fuel consumption. Conversely, a well-designed freeboard depth allows for smoother navigation, reducing resistance and improving overall performance.Furthermore, understanding the implications of freeboard depth is essential for compliance with international maritime regulations. Various organizations, including the International Maritime Organization (IMO), set standards for freeboard depth to ensure that vessels are built and maintained to specific safety criteria. These regulations are designed to protect not only the vessels themselves but also the marine environment and other vessels operating in the same waters. Failure to comply with these standards can result in penalties and increased liability for shipowners.In conclusion, the importance of freeboard depth cannot be overstated in the realm of maritime design and operation. It is a key measurement that influences a vessel's safety, stability, performance, and compliance with regulations. By thoroughly understanding and effectively managing freeboard depth, naval architects and marine engineers can create vessels that are not only safe and efficient but also capable of withstanding the challenges posed by the unpredictable nature of the sea. As the maritime industry continues to evolve, the principles surrounding freeboard depth will remain a fundamental aspect of ship design and operation, ensuring the safety and success of maritime endeavors.

“自由高度深度”这一概念在海洋建筑和海洋工程领域至关重要。它指的是船只或小艇的水线与上甲板水平之间的垂直距离。理解这个测量对于安全、稳定性和设计效率等多个方面都很重要。“自由高度深度”在确定船舶可以承载多少重量而不影响其浮力方面起着重要作用。在设计船舶时，工程师必须考虑“自由高度深度”，以确保其符合安全规定。较高的“自由高度深度”意味着船舶在恶劣海况下不易进水，这对船员和货物的安全至关重要。例如，在风暴频发地区作业的船舶通常会有更大的“自由高度深度”，以减少淹没和翻覆的风险。这一设计方面不仅增强了安全性，还对船舶在各种海况下的整体性能产生了影响。此外，“自由高度深度”是船舶稳定性的关键因素。精确计算的“自由高度深度”确保重心保持在较低的位置，这对于航行的平衡至关重要。如果船舶的“自由高度深度”不足，可能会导致不稳定，从而引发倾斜或过度摇摆等危险情况。因此，海洋建筑师仔细分析重量分布和“自由高度深度”，以实现最佳平衡，提高船舶的适航性。除了安全性和稳定性外，“自由高度深度”还影响船舶的美学和功能方面。具有适当“自由高度深度”的船舶不仅看起来更平衡，而且在燃油效率和速度方面表现更好。当“自由高度深度”过低时，船舶在水中移动时可能会经历更大的阻力，从而导致更高的燃油消耗。相反，设计良好的“自由高度深度”可以实现更平稳的航行，降低阻力，提高整体性能。此外，了解“自由高度深度”的影响对于遵守国际海事法规至关重要。包括国际海事组织（IMO）在内的各种机构设定了“自由高度深度”的标准，以确保船舶按照特定的安全标准建造和维护。这些规定旨在保护船舶本身以及在同一水域内运营的其他船舶和海洋环境。不遵守这些标准可能会导致处罚并增加船东的责任。总之，“自由高度深度”的重要性在海洋设计和运营领域不可低估。这是一个影响船舶安全、稳定性、性能和合规性的重要测量。通过全面理解和有效管理“自由高度深度”，海洋建筑师和海洋工程师可以设计出不仅安全高效，而且能够应对海洋不可预测挑战的船舶。随着海洋行业的不断发展，与“自由高度深度”相关的原则将继续成为船舶设计和运营的基本方面，确保海洋事业的安全与成功。