fire -resisting cable

简明释义

耐火电缆

英英释义

例句

1.The new office complex has been equipped with fire-resisting cable 防火电缆 to minimize fire hazards.

新的办公大楼配备了fire-resisting cable 防火电缆以减少火灾隐患。

2.The electrical contractor recommended fire-resisting cable 防火电缆 for all installations in the industrial zone.

电气承包商建议在工业区的所有安装中使用fire-resisting cable 防火电缆。

3.In high-rise buildings, it is essential to install fire-resisting cable 防火电缆 to ensure safety during emergencies.

在高层建筑中，安装fire-resisting cable 防火电缆是确保紧急情况下安全的必要措施。

4.In areas prone to wildfires, homeowners should consider using fire-resisting cable 防火电缆 in their electrical systems.

在易发生野火的地区，房主应考虑在其电气系统中使用fire-resisting cable 防火电缆。

5.When wiring a theater, using fire-resisting cable 防火电缆 is crucial for protecting the audience and performers.

在布置剧院电线时，使用fire-resisting cable 防火电缆对保护观众和表演者至关重要。

作文

In modern construction and electrical installations, safety is of paramount importance. One of the key components that contribute to the safety of buildings is the use of fire-resisting cable. These cables are specifically designed to withstand high temperatures and prevent the spread of fire, thus protecting both lives and property. The significance of fire-resisting cable cannot be overstated, especially in commercial and industrial environments where the risk of fire is higher due to the presence of various flammable materials and equipment.The primary function of fire-resisting cable is to maintain circuit integrity during a fire. This means that even when exposed to extreme heat, these cables continue to function, allowing emergency systems such as alarms and lighting to operate. This capability is crucial for ensuring safe evacuation and effective emergency response. In contrast, standard cables may fail when subjected to high temperatures, leading to a total loss of power and communication during critical moments.There are several standards and regulations governing the use of fire-resisting cable. For instance, many countries have established fire safety codes that specify the types of materials and construction practices that must be followed to minimize fire hazards. Compliance with these regulations often requires the installation of fire-resisting cable in specific areas of a building, such as escape routes, electrical risers, and areas housing critical infrastructure.Moreover, the manufacturing process of fire-resisting cable involves using special materials that can endure high temperatures without melting or releasing toxic gases. Common materials include low smoke halogen-free compounds, which not only resist flames but also reduce smoke production in the event of a fire. This is essential for maintaining visibility and air quality in escape routes, further enhancing the safety of occupants.In addition to their functional advantages, the use of fire-resisting cable can also lead to cost savings in the long run. While these cables may have a higher initial cost compared to standard cables, their ability to prevent extensive fire damage can save building owners significant amounts in repairs, insurance premiums, and potential legal liabilities. Investing in fire-resisting cable is therefore a wise decision for those looking to enhance the overall safety and resilience of their properties.Furthermore, the growing awareness of fire safety among architects, engineers, and builders has led to an increased demand for fire-resisting cable. As new technologies emerge and building designs become more complex, the need for reliable fire protection measures continues to rise. This trend underscores the importance of incorporating fire-resisting cable into the planning and design phases of construction projects.In conclusion, the role of fire-resisting cable in enhancing fire safety cannot be overlooked. These specialized cables play a crucial role in maintaining electrical continuity during fires, thereby safeguarding lives and property. With stringent regulations and a growing emphasis on safety, the use of fire-resisting cable is becoming increasingly essential in modern construction. By investing in this technology, building owners can ensure a safer environment for all occupants, ultimately contributing to the overall resilience of our communities.

在现代建筑和电气安装中，安全至关重要。构成建筑安全的关键组件之一是使用防火电缆。这些电缆专门设计用于承受高温并防止火势蔓延，从而保护生命和财产。防火电缆的重要性不容小觑，尤其是在商业和工业环境中，由于存在各种易燃材料和设备，火灾风险更高。防火电缆的主要功能是在火灾期间保持电路完整性。这意味着即使在极端高温下，这些电缆仍然能够正常工作，使得报警和照明等应急系统能够运作。这一能力对于确保安全疏散和有效应急响应至关重要。相比之下，普通电缆在高温下可能会失效，导致在关键时刻完全失去电力和通信。许多国家对防火电缆的使用有几项标准和法规。例如，许多国家制定了消防安全规范，规定必须遵循哪些材料和施工实践以最小化火灾危害。遵守这些法规通常要求在建筑的特定区域安装防火电缆，例如逃生路线、电气竖井和关键基础设施所在的区域。此外，防火电缆的制造过程涉及使用特殊材料，这些材料可以在高温下耐受，而不会熔化或释放有毒气体。常用材料包括低烟卤素自由化合物，这些材料不仅能抵御火焰，还能在发生火灾时减少烟雾产生。这对于保持逃生路线的可见性和空气质量至关重要，进一步增强了居民的安全性。除了功能优势外，使用防火电缆还可以在长期内节省成本。虽然与普通电缆相比，这些电缆的初始成本可能更高，但它们预防大规模火灾损害的能力可以为建筑业主节省大量维修、保险费用和潜在法律责任。因此，投资于防火电缆对于希望提升其财产整体安全性和韧性的人来说，是明智的选择。此外，建筑师、工程师和建筑商对消防安全日益重视，导致对防火电缆的需求增加。随着新技术的出现和建筑设计变得更加复杂，对可靠消防保护措施的需求持续上升。这一趋势突显了在建筑项目的规划和设计阶段纳入防火电缆的重要性。总之，防火电缆在增强消防安全方面的作用不容忽视。这些专业电缆在火灾期间维持电力连续性，因而保障生命和财产安全。随着法规的严格和对安全日益重视，防火电缆在现代建筑中变得越来越重要。通过投资这一技术，建筑业主可以为所有居民创造一个更安全的环境，最终促进我们社区的整体韧性。