filament fuse

简明释义

灯丝电路熔丝

英英释义

例句

1.Replacing the filament fuse 灯丝保险丝 is a simple fix for a malfunctioning light.

更换灯丝保险丝 filament fuse 是修理故障灯的简单方法。

2.Make sure to check the filament fuse 灯丝保险丝 if the appliance stops working.

如果设备停止工作，请确保检查一下灯丝保险丝 filament fuse。

3.The technician explained how the filament fuse 灯丝保险丝 protects the circuit from overload.

技术员解释了灯丝保险丝 filament fuse 如何保护电路免受过载。

4.When troubleshooting the circuit, I discovered that the filament fuse 灯丝保险丝 had blown.

在排查电路时，我发现灯丝保险丝 filament fuse 已经烧断。

5.The light bulb burned out because the filament fuse 灯丝保险丝 broke.

灯泡熄灭是因为灯丝保险丝 filament fuse 断了。

作文

In the world of electrical engineering, various components play crucial roles in ensuring the safe and efficient operation of devices. One such component is the filament fuse, a device designed to protect electrical circuits from overloads and short circuits. Understanding how a filament fuse works and its applications can significantly enhance our knowledge of electrical systems. A filament fuse consists of a thin wire or filament that melts when excessive current flows through it. This melting action interrupts the circuit, thereby preventing further damage to the electrical system. The principle behind a filament fuse is relatively simple but effective. When the current exceeds the rated limit, the heat generated by the current causes the filament to reach its melting point. Once the filament melts, the circuit is broken, and the flow of electricity is halted. This mechanism protects sensitive components from potential damage caused by high currents. The importance of a filament fuse cannot be overstated, especially in household appliances and industrial machinery. For example, consider a situation where a washing machine experiences a sudden surge in electrical current due to a malfunction. Without a filament fuse, this surge could damage the motor or other critical components, leading to costly repairs. However, with a properly rated filament fuse in place, the fuse will blow, protecting the appliance from severe damage and possibly preventing a fire hazard. Moreover, filament fuses are available in various ratings, allowing engineers and technicians to select the appropriate fuse for specific applications. This selection process is vital because using a fuse with an incorrect rating can either lead to unnecessary interruptions in service or fail to protect the equipment adequately. Therefore, understanding the specifications of a filament fuse is essential for anyone involved in electrical work. In addition to their protective function, filament fuses also serve as indicators of electrical issues. When a fuse blows, it often signifies that there was a problem in the circuit, prompting users to investigate the cause of the overload. This diagnostic feature is particularly useful in troubleshooting electrical devices, as it helps pinpoint areas that may require maintenance or repair. While filament fuses have been a staple in electrical systems for many years, advancements in technology have led to the development of alternative protective devices, such as circuit breakers. However, filament fuses still hold a significant place in various applications due to their simplicity and effectiveness. They are often used in low-voltage applications where reliability and cost-effectiveness are paramount. In conclusion, the filament fuse is a fundamental component in electrical engineering that plays a vital role in protecting circuits from overloads and short circuits. Its ability to interrupt the flow of electricity when excessive current is detected not only safeguards electrical devices but also enhances safety in homes and industries. By understanding the workings and applications of the filament fuse, we can appreciate its importance in maintaining the integrity of electrical systems and preventing potential hazards. As technology continues to evolve, it is essential to recognize the enduring relevance of traditional components like the filament fuse in our increasingly complex electrical landscape.

在电气工程的世界中，各种组件在确保设备安全和高效运行方面发挥着至关重要的作用。其中一个这样的组件是熔丝，它旨在保护电路免受过载和短路的影响。了解熔丝的工作原理及其应用可以显著增强我们对电气系统的知识。熔丝由一根细线或长丝组成，当过多电流流过时，它会熔化。这种熔化作用中断了电路，从而防止电气系统进一步损坏。熔丝的原理相对简单但有效。当电流超过额定限制时，由电流产生的热量使长丝达到其熔点。一旦长丝熔化，电路就会断开，电流的流动将被停止。这一机制保护了敏感组件，免受高电流可能造成的损坏。熔丝的重要性不容小觑，尤其是在家用电器和工业机械中。例如，考虑一种情况，当洗衣机由于故障而经历突然的电流激增。如果没有熔丝，这种激增可能会损坏电动机或其他关键组件，导致昂贵的维修。然而，如果安装了适当额定的熔丝，熔丝将熔断，保护设备免受严重损坏，并可能防止火灾隐患。此外，熔丝有各种额定值，使工程师和技术人员能够为特定应用选择合适的熔丝。这个选择过程至关重要，因为使用额定不正确的熔丝可能会导致服务不必要的中断，或者未能充分保护设备。因此，了解熔丝的规格对于任何参与电气工作的人来说都是必不可少的。除了保护功能外，熔丝还作为电气问题的指示器。当熔丝熔断时，通常表示电路存在问题，促使用户调查过载的原因。这一诊断特性在排除电气设备故障时特别有用，因为它有助于确定可能需要维护或修理的区域。虽然熔丝在电气系统中已经存在多年，但技术的进步导致了替代保护设备的开发，例如断路器。然而，由于其简便性和有效性，熔丝仍然在各种应用中占有重要地位。它们通常用于低压应用，其中可靠性和成本效益至关重要。总之，熔丝是电气工程中的基本组件，在保护电路免受过载和短路方面发挥着至关重要的作用。当检测到过多电流时，它能够中断电流的流动，不仅保护电气设备，还增强了家庭和工业的安全性。通过了解熔丝的工作原理和应用，我们可以欣赏到它在维护电气系统完整性和防止潜在危害方面的重要性。随着技术的不断发展，认识到传统组件如熔丝在我们日益复杂的电气环境中的持久相关性是至关重要的。