feed water stop valve

简明释义

给水截止阀

英英释义

例句

1.If the system experiences a pressure drop, check the feed water stop valve 给水截止阀 for any blockages.

如果系统出现压力下降，请检查给水截止阀 feed water stop valve是否有任何堵塞。

2.Before starting the boiler, ensure that the feed water stop valve 给水截止阀 is fully open to allow water flow.

在启动锅炉之前，确保给水截止阀 feed water stop valve完全打开，以便允许水流入。

3.Regular maintenance of the feed water stop valve 给水截止阀 is crucial for preventing leaks.

定期维护给水截止阀 feed water stop valve对于防止泄漏至关重要。

4.During the inspection, the feed water stop valve 给水截止阀 was found to be leaking and needed replacement.

在检查过程中，发现给水截止阀 feed water stop valve漏水，需要更换。

5.The technician adjusted the feed water stop valve 给水截止阀 to regulate the water supply.

技术人员调整了给水截止阀 feed water stop valve以调节供水量。

作文

In the realm of industrial machinery and systems, understanding the various components that contribute to operational efficiency is crucial. One such component is the feed water stop valve, which plays a vital role in managing the flow of water into boilers and other equipment that require a constant supply of water for optimal functioning. The feed water stop valve (给水截止阀) is designed to control the water supply by either allowing or stopping the flow, ensuring that the system operates safely and efficiently.The primary function of the feed water stop valve is to regulate the amount of water entering a boiler. Boilers are essential in many industries, including power generation, manufacturing, and heating. They rely on a continuous supply of water to produce steam or heat, which is then used for various processes. If the water supply is interrupted or insufficient, it can lead to overheating, pressure build-up, and potentially catastrophic failures. Thus, the feed water stop valve serves as a critical safety mechanism, preventing such incidents by allowing operators to manage the water flow effectively.Installation of the feed water stop valve must be done with precision, as its location within the system can affect overall performance. Typically, it is installed at the feed water line, just before the water enters the boiler. This strategic placement ensures that the valve can quickly respond to changes in demand for water, making it easier for operators to maintain optimal water levels. Additionally, regular maintenance of the feed water stop valve is necessary to ensure its reliability. Over time, wear and tear can cause the valve to malfunction, leading to leaks or complete failure. Routine inspections and timely replacements of worn parts can help prevent these issues.Moreover, the operation of the feed water stop valve can be manual or automatic, depending on the complexity of the system. Manual valves require operators to physically turn a handle or lever to open or close the valve, while automatic valves use sensors and actuators to adjust the flow based on real-time data. Automatic systems are often preferred in large-scale operations where precise control of water flow is essential for maintaining efficiency and safety.The significance of the feed water stop valve extends beyond just controlling water flow. It also contributes to the overall energy efficiency of a system. By ensuring that the right amount of water is supplied to the boiler, the valve helps maintain optimal operating temperatures and pressures, reducing fuel consumption and minimizing emissions. In an era where sustainability is paramount, such efficiency measures are becoming increasingly important.In conclusion, the feed water stop valve (给水截止阀) is an indispensable component in industrial systems that utilize boilers. Its ability to regulate water flow not only enhances operational efficiency but also plays a crucial role in ensuring safety. As industries continue to evolve and adopt more advanced technologies, the importance of understanding and maintaining components like the feed water stop valve will only grow. Therefore, operators and engineers must remain vigilant in their efforts to monitor and maintain this critical piece of equipment, ensuring that it functions correctly to support the broader goals of their operations.

在工业机械和系统的领域中，理解各种有助于操作效率的组件至关重要。其中一个组件是给水截止阀，它在管理水流进入锅炉和其他需要持续供水以实现最佳功能的设备中发挥着重要作用。给水截止阀（feed water stop valve）旨在通过允许或停止水流来控制水的供应，确保系统安全高效地运行。给水截止阀的主要功能是调节进入锅炉的水量。锅炉在许多行业中都是必不可少的，包括发电、制造和供热。它们依赖于持续的水供应来产生蒸汽或热量，然后用于各种过程。如果水供应中断或不足，可能导致过热、压力升高，甚至可能导致灾难性故障。因此，给水截止阀作为一种关键的安全机制，通过有效管理水流来防止此类事件的发生。给水截止阀的安装必须精确，因为其在系统中的位置会影响整体性能。通常，它安装在给水管线的末端，就在水进入锅炉之前。这种战略性的位置确保了阀门能够快速响应水需求的变化，使操作员更容易维持最佳水位。此外，定期维护给水截止阀是确保其可靠性的必要条件。随着时间的推移，磨损可能导致阀门发生故障，导致泄漏或完全失效。定期检查和及时更换磨损部件可以帮助防止这些问题。此外，给水截止阀的操作可以是手动的或自动的，具体取决于系统的复杂性。手动阀门要求操作员物理转动把手或杠杆来开启或关闭阀门，而自动阀门则使用传感器和执行器根据实时数据调整流量。在大规模操作中，自动系统往往更受欢迎，因为它可以精确控制水流，以维护效率和安全。给水截止阀的重要性不仅限于控制水流。它还对系统的整体能源效率做出贡献。通过确保锅炉获得适量的水，阀门有助于维持最佳的操作温度和压力，从而减少燃料消耗并最小化排放。在可持续性至关重要的时代，这种效率措施变得越来越重要。总之，给水截止阀（feed water stop valve）是利用锅炉的工业系统中不可或缺的组件。它调节水流的能力不仅提高了操作效率，而且在确保安全方面也发挥着至关重要的作用。随着行业不断发展并采用更先进的技术，理解和维护像给水截止阀这样的组件的重要性将只会增加。因此，操作员和工程师必须在监测和维护这一关键设备的努力中保持警惕，以确保其正常运行，支持其操作的更广泛目标。