entry loss

简明释义

进口损失

英英释义

例句

1.In HVAC systems, minimizing entry loss can improve overall efficiency and reduce energy costs.

在暖通空调系统中，减少入口损失可以提高整体效率并降低能源成本。

2.The entry loss from the ductwork was significant, affecting the airflow throughout the building.

管道系统的入口损失很大，影响了整个建筑的气流。

3.To enhance performance, the team focused on reducing entry loss in the new design.

为了提高性能，团队专注于减少新设计中的入口损失。

4.The engineer calculated the entry loss to determine how much pressure drop would occur at the inlet of the pipe.

工程师计算了入口损失以确定管道入口处会发生多少压力降。

5.The fluid dynamics simulation showed a high entry loss at the junction, necessitating a redesign.

流体动力学模拟显示在交汇处存在高入口损失，需要重新设计。

作文

In the field of engineering and telecommunications, understanding the concept of entry loss is crucial for optimizing system performance. Entry loss refers to the reduction in signal strength that occurs when a signal enters a new medium or component, such as a cable or connector. This phenomenon can significantly impact the overall efficiency of communication systems, making it essential for engineers to minimize these losses wherever possible.When designing a network, engineers must consider various factors that contribute to entry loss. For instance, the quality of the materials used in cables and connectors plays a significant role. High-quality components tend to have lower entry loss, allowing for more efficient signal transmission. Additionally, the design of the connectors can also affect the amount of entry loss experienced. Poorly designed connectors may introduce additional resistance or reflections, further degrading the signal quality.Another important aspect to consider is the frequency of the signals being transmitted. Higher frequency signals are often more susceptible to entry loss, which means that systems operating at these frequencies may require more careful planning and selection of components. Engineers must strike a balance between the desired frequency and the potential for entry loss to ensure optimal performance.Moreover, environmental factors can also influence entry loss. For example, temperature fluctuations can affect the conductivity of materials, leading to variations in signal strength as it enters different mediums. Engineers must account for these variables when designing systems to ensure that they can perform reliably under various conditions.To mitigate entry loss, engineers often employ several strategies. One common approach is to use high-quality shielding materials to protect signals from external interference, which can exacerbate entry loss. Additionally, careful routing of cables and minimizing the number of connections can help reduce the opportunities for entry loss to occur.In conclusion, understanding entry loss is vital for anyone involved in the design and implementation of communication systems. By recognizing the factors that contribute to entry loss and taking steps to minimize it, engineers can enhance the performance and reliability of their systems. As technology continues to evolve, the importance of addressing entry loss will only grow, making it an essential area of focus for future innovations in telecommunications and engineering.

在工程和电信领域，理解entry loss的概念对于优化系统性能至关重要。entry loss指的是信号进入新介质或组件（如电缆或连接器）时信号强度的降低。这种现象会显著影响通信系统的整体效率，因此工程师必须尽可能减少这些损失。在设计网络时，工程师必须考虑导致entry loss的各种因素。例如，电缆和连接器中使用的材料质量起着重要作用。高质量的组件通常具有较低的entry loss，从而允许更有效的信号传输。此外，连接器的设计也会影响经历的entry loss量。设计不良的连接器可能会引入额外的阻力或反射，进一步降低信号质量。另一个需要考虑的重要方面是所传输信号的频率。高频信号通常对entry loss更为敏感，这意味着在这些频率下运行的系统可能需要更仔细的规划和组件选择。工程师必须在所需频率与潜在的entry loss之间找到平衡，以确保最佳性能。此外，环境因素也会影响entry loss。例如，温度波动可能会影响材料的导电性，导致信号在进入不同介质时强度的变化。工程师必须在设计系统时考虑这些变量，以确保它们在各种条件下都能可靠地运行。为了减轻entry loss，工程师通常采用几种策略。一种常见的方法是使用高质量的屏蔽材料来保护信号免受外部干扰，这可能会加剧entry loss。此外，仔细布线电缆并最小化连接数量可以帮助减少发生entry loss的机会。总之，理解entry loss对于任何参与通信系统设计和实施的人来说都是至关重要的。通过认识到导致entry loss的因素并采取措施加以最小化，工程师可以增强其系统的性能和可靠性。随着技术的不断发展，解决entry loss的重要性只会增加，使其成为未来电信和工程创新的一个重要关注领域。