engine bedplate

简明释义

发动机底座板

英英释义

例句

1.We need to replace the bolts on the engine bedplate to ensure stability.

我们需要更换发动机底座上的螺栓以确保稳定性。

2.The alignment of the engine bedplate affects the overall performance of the engine.

发动机底座的对齐会影响发动机的整体性能。

3.The vibration from the engine can cause issues with the engine bedplate over time.

发动机产生的振动可能会随着时间的推移对发动机底座造成问题。

4.The technician inspected the engine bedplate for any signs of wear and tear.

技术人员检查了发动机底座是否有磨损迹象。

5.During maintenance, it is crucial to clean the engine bedplate thoroughly.

在维护过程中，彻底清洁发动机底座至关重要。

作文

The design and construction of marine engines play a crucial role in the efficiency and reliability of ships. One essential component in this system is the engine bedplate, which serves as the foundation for the engine itself. The engine bedplate is a robust structure that supports the weight of the engine and absorbs the vibrations generated during operation. It is typically made from high-strength materials such as cast iron or steel, ensuring durability and stability under various operating conditions. In marine engineering, the engine bedplate must be meticulously designed to accommodate not only the engine's weight but also the dynamic forces acting upon it during operation. These forces can include thrust from the propeller, torque from the engine, and the natural motion of the vessel due to waves and wind. Therefore, engineers must take into account factors such as load distribution, material properties, and environmental conditions when designing the engine bedplate. Moreover, the engine bedplate is integral to the alignment of the engine with the ship's propulsion system. Proper alignment is crucial for efficient power transmission and to minimize wear and tear on the engine components. Misalignment can lead to increased fuel consumption, reduced performance, and even catastrophic failures. Thus, the installation of the engine bedplate requires precision and expertise to ensure that all components are correctly positioned. Another important aspect of the engine bedplate is its role in maintenance and repair. Access to the engine and its components is often limited, so a well-designed engine bedplate allows for easier inspection and servicing. Engineers often incorporate features such as removable covers or access points to facilitate maintenance tasks. This design consideration not only improves the longevity of the engine but also enhances safety for the crew working on board. In conclusion, the engine bedplate is a vital component in marine engine design, providing support, stability, and alignment for the engine. Its importance cannot be overstated, as it directly impacts the engine's performance and the overall efficiency of the vessel. As technology advances, the design and materials used for the engine bedplate will continue to evolve, ensuring that marine engines remain reliable and efficient for years to come.

海洋发动机的设计和建造在船舶的效率和可靠性中起着至关重要的作用。这个系统中一个重要的组件是发动机底座，它作为发动机本身的基础。发动机底座是一个坚固的结构，支撑着发动机的重量，并吸收运行过程中产生的振动。它通常由铸铁或钢等高强度材料制成，确保在各种操作条件下的耐用性和稳定性。在海洋工程中，发动机底座必须经过精心设计，以适应发动机的重量以及运行过程中作用于其上的动态力。这些力可以包括来自螺旋桨的推力、来自发动机的扭矩，以及由于波浪和风造成的船只自然运动。因此，工程师在设计发动机底座时必须考虑负载分布、材料特性和环境条件等因素。此外，发动机底座对于发动机与船舶推进系统的对齐也至关重要。正确的对齐对于有效的动力传输至关重要，并且可以最小化发动机组件的磨损和撕裂。错位可能导致燃料消耗增加、性能降低，甚至灾难性的故障。因此，发动机底座的安装需要精确和专业的技术，以确保所有组件都正确定位。发动机底座的另一个重要方面是其在维护和修理中的作用。由于发动机及其组件的接入通常受到限制，因此设计良好的发动机底座允许更容易地进行检查和维护。工程师通常会加入可拆卸的盖子或接入点，以便于维护任务的进行。这种设计考虑不仅提高了发动机的使用寿命，还增强了船员在船上工作的安全性。总之，发动机底座是海洋发动机设计中的重要组成部分，为发动机提供支持、稳定性和对齐。它的重要性不容忽视，因为它直接影响发动机的性能和船舶的整体效率。随着技术的进步，发动机底座的设计和使用的材料将继续发展，以确保海洋发动机在未来几年保持可靠和高效。