end of stroke

简明释义

行程终了

英英释义

例句

1.The engineer explained that the end of stroke 行程结束 is critical for safety mechanisms.

工程师解释说，行程结束 end of stroke对安全机制至关重要。

2.You need to adjust the settings to ensure the actuator returns to the end of stroke 行程结束 position smoothly.

您需要调整设置，以确保执行器平稳地返回到行程结束 end of stroke位置。

3.During the test, we measured the time taken to reach the end of stroke 行程结束.

在测试过程中，我们测量了到达行程结束 end of stroke所需的时间。

4.Make sure to install the limit switch at the end of stroke 行程结束 for accurate operation.

确保在行程结束 end of stroke处安装限位开关以确保准确操作。

5.The machine automatically stops at the end of stroke 行程结束 to prevent any damage.

机器在行程结束 end of stroke时自动停止，以防止任何损坏。

作文

In the world of technology and engineering, precision is paramount. One term that often arises in discussions related to machinery and mechanical systems is the phrase end of stroke. This term refers to the final position reached by a moving part, such as a piston or lever, at the end of its travel in one direction. Understanding the end of stroke is crucial for various applications, including automation, robotics, and manufacturing processes. The end of stroke can be seen as a critical point in the operation of machines. For instance, in hydraulic systems, the end of stroke indicates when the hydraulic cylinder has fully extended or retracted. Knowing this position helps in programming control systems that manage these movements. If a machine continues to operate beyond the end of stroke, it could lead to mechanical failure, causing damage to both the machine and the components involved. Therefore, engineers must design systems that accurately detect this position. Moreover, the end of stroke plays a significant role in safety mechanisms. Many machines incorporate limit switches that are activated when the moving part reaches the end of stroke. These switches can stop the machine from operating further, preventing accidents and ensuring the safety of operators. For example, in industrial robots, the end of stroke detection is essential to protect both the robot and its surroundings from potential collisions or injuries. In addition to safety, the end of stroke also affects the efficiency of operations. In automated production lines, knowing the precise end of stroke allows for optimal timing and coordination among different machines. This synchronization leads to increased productivity and reduced downtime, which are critical factors in competitive manufacturing environments. By understanding the end of stroke, engineers can design better systems that maximize output while minimizing waste. Furthermore, the concept of end of stroke extends beyond mechanical systems. It is also relevant in software development, particularly in programming languages that involve graphics or animations. In these contexts, the end of stroke may refer to the completion of a drawing or animation sequence. Developers must ensure that the program recognizes when an action has reached its end of stroke, allowing for smooth transitions and user experiences. In conclusion, the term end of stroke encapsulates a vital concept in both mechanical and software systems. Its implications reach far and wide, affecting safety, efficiency, and functionality. As technology continues to evolve, understanding terms like end of stroke becomes increasingly important for engineers, programmers, and operators alike. Mastering this concept not only enhances technical knowledge but also contributes to the advancement of reliable and innovative systems in various industries.

在科技和工程的世界中，精确性至关重要。一个常在与机械和机械系统相关的讨论中出现的术语是短语end of stroke。这个术语指的是一个移动部件（例如活塞或杠杆）在其行程结束时所达到的最终位置。理解end of stroke对于自动化、机器人技术和制造过程等各种应用至关重要。end of stroke可以被视为机器操作中的一个关键点。例如，在液压系统中，end of stroke表示液压缸完全伸展或收缩时的位置。了解这个位置有助于编程控制系统来管理这些运动。如果机器在超过end of stroke后继续运行，可能会导致机械故障，损坏机器及相关组件。因此，工程师必须设计能够准确检测此位置的系统。此外，end of stroke在安全机制中也发挥着重要作用。许多机器都配备了限位开关，当移动部件达到end of stroke时会被激活。这些开关可以防止机器进一步运行，从而避免事故并确保操作人员的安全。例如，在工业机器人中，end of stroke检测对于保护机器人及其周围环境免受潜在碰撞或伤害至关重要。除了安全性，end of stroke还影响操作的效率。在自动化生产线上，准确了解end of stroke可以实现不同机器之间的最佳时机和协调。这种同步提高了生产力，减少了停机时间，而这些都是竞争激烈的制造环境中的关键因素。通过理解end of stroke，工程师能够设计出更好的系统，以最大限度地提高产出，同时减少浪费。此外，end of stroke的概念超越了机械系统。在涉及图形或动画的编程语言中，它同样相关。在这些上下文中，end of stroke可能指的是绘图或动画序列的完成。开发者必须确保程序能够识别何时一个动作已达到其end of stroke，以便实现流畅的过渡和用户体验。总之，术语end of stroke概括了机械和软件系统中的一个重要概念。它的影响广泛，涉及安全、效率和功能性。随着技术的不断发展，理解像end of stroke这样的术语对工程师、程序员和操作人员来说变得愈加重要。掌握这一概念不仅增强了技术知识，还有助于推动各行业可靠且创新系统的发展。