electrical specification

简明释义

电气说明书

英英释义

例句

1.Before installation, we need to confirm the electrical specification for safety compliance.

在安装之前，我们需要确认电气规范以确保安全合规。

2.The team conducted tests to verify that the system matched the electrical specification.

团队进行了测试，以验证系统是否符合电气规范。

3.Any modifications must adhere to the electrical specification provided by the manufacturer.

任何修改必须遵循制造商提供的电气规范。

4.The engineer reviewed the electrical specification to ensure all components met the required standards.

工程师审核了电气规范以确保所有组件符合要求标准。

5.The electrical specification outlines the voltage and current requirements for the project.

该电气规范概述了项目的电压和电流要求。

作文

In the realm of engineering and technology, understanding the intricacies of various specifications is crucial for the successful development and implementation of any project. One key term that often arises in discussions about electronic devices and systems is electrical specification. This term refers to a detailed description of the electrical characteristics and requirements of a device or system, including parameters such as voltage, current, resistance, and power consumption. By comprehending these specifications, engineers can ensure that the components they choose will work harmoniously together, thereby enhancing the overall performance and reliability of the final product.To illustrate the importance of electrical specification, consider the example of designing a new smartphone. Engineers must carefully evaluate the electrical specification of each component, from the battery to the processor, to ensure compatibility and optimal performance. For instance, if the processor requires a certain voltage level that is not provided by the battery, the device may malfunction or fail to operate altogether. Therefore, having precise electrical specifications is essential for preventing such issues and ensuring the device functions as intended.Moreover, electrical specifications play a significant role in safety considerations. Devices that do not meet the required electrical specifications can pose serious risks, such as overheating, short circuits, or even fires. For example, if a power supply unit is rated for a maximum voltage but is subjected to a higher voltage than specified, it could lead to catastrophic failure. Thus, adhering to electrical specifications is not only a matter of performance but also of safety, making it a critical aspect of product design and engineering.In addition to performance and safety, electrical specifications also influence the cost and efficiency of manufacturing processes. When components are designed with specific electrical specifications, manufacturers can streamline production and reduce waste. For instance, using standardized components that adhere to common electrical specifications allows for mass production, which can significantly lower costs. Conversely, custom components that deviate from typical electrical specifications may require more time and resources to produce, ultimately increasing the final price of the product.Furthermore, understanding electrical specifications is vital for troubleshooting and maintenance. When a device malfunctions, technicians often refer to its electrical specifications to diagnose the problem accurately. By comparing the actual performance of a device against its established electrical specifications, they can pinpoint issues such as faulty components or incorrect installations. This knowledge not only facilitates effective repairs but also extends the lifespan of the device.In conclusion, the term electrical specification encompasses a wide range of essential information that is critical for the design, safety, cost-effectiveness, and maintenance of electronic devices and systems. By thoroughly understanding and adhering to these specifications, engineers can create reliable and efficient products that meet consumer demands and industry standards. As technology continues to advance, the importance of electrical specifications will only grow, making it imperative for professionals in the field to stay informed and adept at navigating this crucial aspect of engineering.

在工程和技术领域，理解各种规格的复杂性对于任何项目的成功开发和实施至关重要。在有关电子设备和系统的讨论中，一个常见的术语是电气规格。这个术语指的是对设备或系统的电气特性和要求的详细描述，包括电压、电流、电阻和功耗等参数。通过理解这些规格，工程师可以确保他们选择的组件能够和谐地工作，从而增强最终产品的整体性能和可靠性。为了说明电气规格的重要性，我们考虑设计一款新智能手机的例子。工程师必须仔细评估每个组件的电气规格，从电池到处理器，以确保兼容性和最佳性能。例如，如果处理器需要某个电压水平，而电池未能提供该电压，设备可能会发生故障或根本无法操作。因此，拥有精确的电气规格对于防止此类问题并确保设备按预期运行至关重要。此外，电气规格在安全方面也发挥着重要作用。不符合所需电气规格的设备可能会带来严重风险，例如过热、短路甚至火灾。例如，如果电源单元的额定电压达到最大值，但却遭受高于规定的电压，则可能导致灾难性的故障。因此，遵循电气规格不仅关乎性能，还关乎安全，这使其成为产品设计和工程的关键方面。除了性能和安全外，电气规格还影响制造过程的成本和效率。当组件按照特定的电气规格设计时，制造商可以简化生产并减少浪费。例如，使用符合常见电气规格的标准化组件可以实现大规模生产，从而显著降低成本。相反，偏离典型电气规格的定制组件可能需要更多时间和资源来生产，最终增加产品的最终价格。此外，理解电气规格对于故障排除和维护至关重要。当设备出现故障时，技术人员通常会参考其电气规格以准确诊断问题。通过将设备的实际性能与其既定的电气规格进行比较，他们可以找到故障组件或安装不当等问题。这种知识不仅有助于有效修复，还可以延长设备的使用寿命。总之，电气规格这一术语涵盖了对电子设备和系统的设计、安全、成本效益和维护至关重要的广泛信息。通过全面理解和遵循这些规格，工程师可以创造出可靠且高效的产品，以满足消费者需求和行业标准。随着技术的不断进步，电气规格的重要性只会增加，因此，行业专业人士必须保持信息灵通，并熟练掌握这一工程关键方面。