derrick heel

简明释义

吊杆座

英英释义

例句

1.Before starting the project, we need to check the integrity of the derrick heel (起重机底座).

在开始项目之前，我们需要检查derrick heel（起重机底座）的完整性。

2.The crane operator adjusted the load to ensure the derrick heel (起重机底座) was stable before lifting.

起重机操作员调整了负载，以确保derrick heel（起重机底座）在提升前是稳定的。

3.The engineers designed a new derrick heel (起重机底座) that could support heavier loads.

工程师们设计了一种新的derrick heel（起重机底座），可以支撑更重的负载。

4.Proper maintenance of the derrick heel (起重机底座) is crucial for the safety of the construction site.

对derrick heel（起重机底座）的适当维护对施工现场的安全至关重要。

5.During the inspection, we found that the derrick heel (起重机底座) had suffered some wear and needed replacement.

在检查过程中，我们发现derrick heel（起重机底座）有些磨损，需要更换。

作文

The term derrick heel refers to a crucial component in the construction of a derrick, which is a type of crane used in various industries, particularly in oil drilling and construction. Understanding the function and importance of the derrick heel can provide insights into the complexities of heavy machinery and structural engineering. A derrick consists of a framework that supports a hoisting mechanism. The derrick heel is essentially the base or the bottom part of the derrick structure, where the vertical supports meet the ground or the platform. This component plays a vital role in ensuring stability and balance, which are essential for the safe operation of the derrick. Without a well-designed derrick heel, the entire structure could be at risk of tipping over, especially when lifting heavy loads. In engineering terms, the derrick heel must be designed to withstand various forces, including tension, compression, and lateral loads. Engineers often use materials such as steel or reinforced concrete to construct the derrick heel, ensuring that it can support the weight of the derrick itself as well as any additional loads that may be applied during operations. The design process typically involves complex calculations and simulations to predict how the derrick heel will perform under different conditions. Moreover, the placement of the derrick heel is also critical. It needs to be positioned on stable ground to prevent settling or shifting, which could compromise the integrity of the entire structure. Additionally, environmental factors such as wind, seismic activity, and soil conditions must be considered when designing and installing the derrick heel. In practical applications, workers must regularly inspect the derrick heel for signs of wear or damage. Any issues detected can lead to significant safety hazards, making maintenance an essential aspect of operating a derrick. Training programs for operators often include information on how to properly assess the condition of the derrick heel and what steps to take if problems are identified. The significance of the derrick heel extends beyond mere physical support; it also symbolizes the intersection of engineering principles and real-world applications. Each time a derrick is used for drilling or lifting, the reliability of the derrick heel directly impacts the success of the operation. Therefore, understanding this term is not only important for those in the engineering field but also for anyone involved in industries that utilize heavy machinery. In conclusion, the derrick heel is a fundamental aspect of derrick construction, embodying the principles of stability, safety, and engineering design. By grasping the importance of the derrick heel, one can appreciate the complexities involved in operating heavy machinery and the meticulous planning required to ensure safety and efficiency in industrial operations.

“derrick heel”这个术语指的是在建造 derrick（即一种起重机，广泛应用于石油钻探和建筑等行业）时的一个重要组成部分。理解derrick heel的功能和重要性，可以深入了解重型机械和结构工程的复杂性。一个 derrick 由一个框架构成，该框架支撑着一个提升机制。derrick heel 实际上是 derrick 结构的底部或基础部分，垂直支撑与地面或平台相接触的地方。这个组件在确保稳定和平衡方面起着至关重要的作用，这对于 derrick 的安全操作至关重要。如果没有设计良好的derrick heel，整个结构可能会面临倾覆的风险，特别是在提升重物时。在工程术语中，derrick heel 必须设计成能够承受各种力量，包括拉力、压力和横向载荷。工程师通常使用钢材或钢筋混凝土等材料来建造derrick heel，以确保其能够支撑 derrick 本身的重量以及在操作过程中可能施加的任何额外负荷。设计过程通常涉及复杂的计算和模拟，以预测derrick heel在不同条件下的表现。此外，derrick heel 的放置也至关重要。它需要放置在稳定的地面上，以防止沉降或移动，这可能会影响整个结构的完整性。此外，风、地震活动和土壤条件等环境因素也必须在设计和安装derrick heel时考虑。在实际应用中，工人必须定期检查derrick heel是否有磨损或损坏的迹象。发现的任何问题都可能导致严重的安全隐患，因此维护是操作 derrick 的一个重要方面。操作员的培训计划通常包括如何正确评估derrick heel的状况以及在发现问题时采取什么步骤的信息。derrick heel的重要性不仅仅体现在物理支撑上；它还象征着工程原理与现实应用之间的交汇。每次 derrick 被用于钻探或提升时，derrick heel的可靠性直接影响操作的成功。因此，理解这个术语不仅对工程领域的人士重要，对任何参与使用重型机械的行业的人士来说也同样重要。总之，derrick heel 是 derrick 建造的一个基本方面，体现了稳定性、安全性和工程设计的原则。通过掌握derrick heel的重要性，人们可以更好地欣赏到操作重型机械所涉及的复杂性以及确保工业操作安全和效率所需的细致规划。