cut-out voltage

简明释义

截止电压

英英释义

例句

1.Before installation, ensure the cut-out voltage (切断电压) matches the specifications of the equipment.

在安装之前，请确保切断电压（切断电压）与设备的规格相匹配。

2.For safety reasons, the cut-out voltage (切断电压) is programmed into the device's firmware.

出于安全原因，切断电压（切断电压）被编程到设备的固件中。

3.In solar power systems, the cut-out voltage (切断电压) is set to protect the inverter from low voltage conditions.

在太阳能发电系统中，切断电压（切断电压）被设定为保护逆变器免受低电压条件的影响。

4.The technician explained that exceeding the cut-out voltage (切断电压) could lead to system failures.

技术人员解释说，超过切断电压（切断电压）可能导致系统故障。

5.The battery management system activates when the voltage drops below the cut-out voltage (切断电压) to prevent damage.

当电压低于切断电压（切断电压）时，电池管理系统会激活以防止损坏。

作文

In the world of electronics, understanding various technical terms is crucial for both professionals and enthusiasts alike. One such term that often arises in discussions about power supply systems is cut-out voltage. This term refers to a specific voltage level at which a device or system will cease to operate, effectively 'cutting out' from the power supply. The concept of cut-out voltage is particularly significant in battery-operated devices, where maintaining an optimal voltage range is essential for functionality and safety.When a battery-powered device operates, it draws energy from its battery until the voltage drops to a certain threshold. This threshold is what we refer to as the cut-out voltage. For example, in lithium-ion batteries, the cut-out voltage is typically set around 3.0 volts per cell. If the voltage drops below this level, the battery management system will disconnect the load to prevent further discharge, which could lead to irreversible damage to the battery.The importance of understanding cut-out voltage cannot be overstated. For manufacturers, setting the correct cut-out voltage is critical to ensuring the longevity and reliability of their products. If the cut-out voltage is set too high, the battery may not fully utilize its capacity, leading to inefficient performance. Conversely, if it is set too low, there is a risk of over-discharging the battery, which can damage the cells and shorten their lifespan.In practical applications, the cut-out voltage plays a vital role in various devices, from smartphones to electric vehicles. For instance, in electric vehicles (EVs), the cut-out voltage is carefully monitored to ensure that the vehicle operates efficiently without risking battery health. A well-designed battery management system will automatically cut off power to the vehicle’s systems once the cut-out voltage is reached, ensuring that the battery can be recharged without damage.Moreover, understanding cut-out voltage is also important for users. Knowing the cut-out voltage of a device can help users manage their usage patterns effectively. For example, if a user is aware that their device has a cut-out voltage of 3.0 volts, they can plan their charging cycles accordingly to avoid reaching this critical level. This knowledge empowers users to extend the life of their devices and maintain peak performance.In conclusion, the term cut-out voltage encapsulates a fundamental concept in the realm of electronics and power management. It serves as a protective measure for batteries, ensuring they are not over-discharged and remain functional over time. For manufacturers, it is a critical specification that influences product design, while for consumers, it provides valuable insight into managing device usage. As technology continues to advance, the significance of understanding terms like cut-out voltage will only grow, making it an essential aspect of modern electronics literacy.

在电子产品的世界里，理解各种技术术语对专业人士和爱好者来说都是至关重要的。其中一个经常出现在电源系统讨论中的术语是切断电压。这个术语指的是设备或系统停止工作的特定电压水平，实际上是从电源中“切断”出来。切断电压的概念在电池供电的设备中尤为重要，因为保持最佳电压范围对于功能和安全性至关重要。当电池供电的设备运行时，它会从电池中提取能量，直到电压下降到某个阈值。这个阈值就是我们所称的切断电压。例如，在锂离子电池中，切断电压通常设定在每个单元约3.0伏。如果电压降到这个水平以下，电池管理系统将断开负载，以防止进一步放电，这可能导致电池不可逆转的损坏。理解切断电压的重要性不容小觑。对于制造商而言，设置正确的切断电压对于确保其产品的耐用性和可靠性至关重要。如果切断电压设定得过高，电池可能无法充分利用其容量，导致性能低效。相反，如果设定得过低，就有过度放电的风险，这可能损害电池并缩短其使用寿命。在实际应用中，切断电压在各种设备中发挥着至关重要的作用，从智能手机到电动汽车。例如，在电动汽车（EV）中，切断电压会被仔细监控，以确保车辆高效运行而不危及电池健康。设计良好的电池管理系统会在达到切断电压时自动切断电力供应，以确保电池可以安全充电而不会受损。此外，理解切断电压对用户同样重要。了解设备的切断电压可以帮助用户有效地管理使用模式。例如，如果用户知道他们的设备的切断电压为3.0伏，他们可以相应规划充电周期，以避免达到这一关键水平。这种知识使用户能够延长设备的使用寿命，并保持最佳性能。总之，切断电压这个术语涵盖了电子和电源管理领域的一个基本概念。它作为电池的保护措施，确保电池不会过度放电并保持长期功能。对于制造商而言，这是影响产品设计的关键规格，而对于消费者而言，它提供了管理设备使用的重要见解。随着技术的不断进步，理解像切断电压这样的术语的重要性只会增加，使其成为现代电子素养的一个重要方面。