dead short

简明释义

完全短路

英英释义

例句

1.After inspecting the wires, we discovered that a dead short 短路 had caused the outage.

检查电线后，我们发现一个dead short 短路导致了停电。

2.The circuit was damaged because it experienced a dead short 短路 that bypassed all safety features.

由于发生了一个dead short 短路，电路受损，绕过了所有安全特性。

3.When troubleshooting the device, we found a dead short 短路 in the power supply.

在排查设备时，我们发现电源中有一个dead short 短路。

4.The fire started due to a dead short 短路 in the old electrical system.

火灾是由于旧电气系统中的dead short 短路引起的。

5.The technician warned us about the risks of a dead short 短路 in the wiring.

技术人员警告我们电线中存在dead short 短路的风险。

作文

In the world of electrical engineering, terms like 'dead short' are crucial for understanding circuit behavior. A dead short refers to a situation where there is an unintended low-resistance connection between two points in an electrical circuit, essentially creating a path with little to no resistance. This can lead to excessive current flow, potentially causing damage to components or even fires. Understanding what a dead short is can help engineers design safer and more reliable systems. Imagine a simple circuit consisting of a battery, a switch, and a light bulb. When the switch is closed, electricity flows from the battery to the light bulb, illuminating it. However, if a wire accidentally connects the two terminals of the battery directly, bypassing the light bulb, a dead short occurs. The current will take the path of least resistance, flowing through the wire instead of lighting the bulb. This not only prevents the bulb from lighting up but can also cause the battery to overheat and fail. The implications of a dead short extend beyond just individual components; they can affect entire systems. In industrial settings, machinery relies on complex electrical circuits to function properly. A dead short in such systems can lead to operational failures, downtime, and costly repairs. For this reason, engineers must implement protective measures, such as fuses and circuit breakers, to detect and isolate dead shorts before they cause significant harm. Moreover, the concept of a dead short can be applied metaphorically in various contexts. For instance, in life, we sometimes encounter situations where we feel completely overwhelmed or stuck, akin to being in a dead short. Just as an electrical circuit needs to be reset or repaired, we too may need to reassess our circumstances and find new paths forward. In conclusion, understanding the term dead short is essential for anyone involved in electrical engineering or related fields. It highlights the importance of recognizing potential hazards in circuits and implementing safety measures. Furthermore, the metaphorical application of a dead short encourages us to reflect on our own challenges and seek solutions rather than remain trapped in a state of stagnation. By grasping both the literal and figurative meanings of dead short, we can enhance our knowledge and approach to problem-solving in various aspects of life.

在电气工程的世界中，像“dead short”这样的术语对于理解电路行为至关重要。dead short指的是电路中两个点之间发生意外低阻抗连接的情况，基本上创建了一个几乎没有阻力的路径。这可能导致过量电流流动，从而可能对组件造成损坏甚至引发火灾。理解dead short是什么可以帮助工程师设计更安全、更可靠的系统。想象一个简单的电路，由一个电池、一个开关和一个灯泡组成。当开关闭合时，电流从电池流向灯泡，使其发光。然而，如果一根电线意外地将电池的两个端子直接连接，绕过灯泡，就会发生dead short。电流将沿着最低阻抗的路径流动，流经电线，而不是点亮灯泡。这不仅阻止了灯泡的亮起，还可能导致电池过热和失效。dead short的影响超越了单个组件，它们可能影响整个系统。在工业环境中，机器依赖复杂的电气电路正常运转。这样的系统中的dead short可能导致操作失败、停机和昂贵的维修。因此，工程师必须实施保护措施，如保险丝和断路器，以便在造成重大损害之前检测并隔离dead shorts。此外，dead short的概念在各种背景下也可以隐喻地应用。例如，在生活中，我们有时会遇到感到完全不知所措或被困的情况，类似于处于dead short中。就像电路需要重置或修复一样，我们也可能需要重新评估我们的环境，寻找新的前进道路。总之，理解术语dead short对于任何参与电气工程或相关领域的人来说都是必不可少的。它强调了认识电路中潜在危险的重要性，并实施安全措施。此外，dead short的隐喻应用鼓励我们反思自己的挑战，并寻求解决方案，而不是停滞不前。通过掌握dead short的字面和比喻意义，我们可以增强我们的知识和解决问题的方法，适用于生活的各个方面。