collision bulkhead

简明释义

船首)防撞舱壁防撞舱壁防撞隔堵

英英释义

例句

1.During the inspection, the engineer checked the integrity of the collision bulkhead for any signs of damage.

在检查过程中，工程师检查了碰撞隔舱的完整性是否有损坏迹象。

2.We need to reinforce the collision bulkhead to enhance the ship's safety features.

我们需要加固碰撞隔舱以增强船只的安全性能。

3.The ship's design includes a sturdy collision bulkhead to prevent flooding in case of an accident.

这艘船的设计包括一个坚固的碰撞隔舱，以防止在事故发生时进水。

4.The regulations require that every commercial vessel must have a collision bulkhead installed.

法规要求每艘商业船舶必须安装碰撞隔舱。

5.The collision bulkhead is crucial for maintaining the vessel's buoyancy after a collision.

在碰撞后，碰撞隔舱对维持船只的浮力至关重要。

作文

The importance of safety in maritime engineering cannot be overstated. One of the critical components that contribute to a ship's structural integrity is the collision bulkhead. A collision bulkhead is essentially a partition that is designed to provide a barrier against water ingress in the event of a collision. This structure is typically located at the forward part of the ship and plays a vital role in ensuring the vessel's buoyancy and stability when faced with such unforeseen circumstances.When a ship is underway, it is susceptible to various risks, including collisions with other vessels or underwater obstacles. The collision bulkhead acts as the first line of defense, absorbing the impact and preventing water from flooding into the ship’s interior. Without this essential feature, a minor collision could quickly escalate into a catastrophic situation, leading to potential loss of life and significant environmental hazards.The design and construction of a collision bulkhead are governed by strict regulations set forth by international maritime organizations. These regulations ensure that the bulkhead is constructed with materials that can withstand significant forces and is sealed effectively to prevent leaks. Engineers must also consider the weight and placement of the collision bulkhead to maintain the ship's overall balance and performance.In addition to its primary function of preventing water ingress, the collision bulkhead also serves as a compartmentalization feature within the ship. By dividing the vessel into separate sections, it helps to contain any damage that may occur, thereby limiting the extent of flooding and allowing for better control during emergencies. This compartmentalization is crucial for maintaining the ship's stability and maneuverability, especially in rough seas.Moreover, the collision bulkhead is not just a static element; it is often equipped with additional safety features such as watertight doors and emergency pumps. These enhancements further bolster the ship's defenses against potential disasters. For instance, if a collision occurs and water begins to enter through the collision bulkhead, crew members can quickly seal off affected compartments and activate pumps to remove water, buying time for rescue operations.Training for crew members also emphasizes the importance of the collision bulkhead. Regular drills and simulations ensure that all personnel are familiar with emergency procedures related to the bulkhead and understand how to respond effectively in case of a collision. This training is vital for fostering a culture of safety and preparedness aboard any maritime vessel.In conclusion, the collision bulkhead is a fundamental aspect of ship design that significantly enhances safety at sea. Its ability to absorb impact, prevent flooding, and compartmentalize the vessel makes it an indispensable feature in modern maritime engineering. As we continue to advance in shipbuilding technology, the collision bulkhead will remain a critical focus for engineers and designers, ensuring that our vessels are equipped to handle the challenges of the open water. Understanding the role and significance of the collision bulkhead is essential for anyone involved in maritime operations, as it represents a key element in the ongoing effort to improve safety and reliability in shipping.

在海洋工程中，安全的重要性不容忽视。影响船舶结构完整性的关键组成部分之一是碰撞隔舱。碰撞隔舱本质上是一个旨在在发生碰撞时提供防水屏障的隔断。这种结构通常位于船只的前部，在面对此类不可预见的情况时，确保船舶的浮力和稳定性发挥着重要作用。当船只航行时，它容易受到各种风险的影响，包括与其他船只或水下障碍物的碰撞。碰撞隔舱作为第一道防线，吸收冲击并防止水涌入船舶内部。如果没有这一重要特征，即使是轻微的碰撞也可能迅速升级为灾难性的情况，导致潜在的生命损失和重大的环境危害。碰撞隔舱的设计和建造遵循国际海事组织制定的严格法规。这些法规确保隔舱采用能够承受重大力量的材料建造，并有效密封以防止泄漏。工程师还必须考虑碰撞隔舱的重量和位置，以保持船舶的整体平衡和性能。除了其防止水涌入的主要功能外，碰撞隔舱还作为船舶内部的隔离特征。通过将船舶划分为不同的部分，它有助于限制可能发生的损害，从而限制淹水的程度，并允许在紧急情况下更好地控制。这种隔离对于保持船舶的稳定性和操控性至关重要，尤其是在恶劣海况下。此外，碰撞隔舱不仅仅是一个静态元素；它通常还配备有额外的安全特性，如防水门和应急泵。这些增强功能进一步加强了船舶对潜在灾难的防御能力。例如，如果发生碰撞，水开始通过碰撞隔舱涌入，船员可以迅速封闭受影响的舱室并启动泵来排水，为救援行动争取时间。对船员的培训也强调碰撞隔舱的重要性。定期的演练和模拟确保所有人员熟悉与隔舱相关的紧急程序，并了解如何在碰撞情况下有效响应。这种培训对于在任何海洋船舶上培养安全和准备文化至关重要。总之，碰撞隔舱是船舶设计的基本方面，显著提高了海上的安全性。它吸收冲击、防止淹水和隔离船舶的能力，使其成为现代海洋工程中不可或缺的特征。随着我们在船舶建造技术上的不断进步，碰撞隔舱将继续成为工程师和设计师关注的重点，确保我们的船舶能够应对开放水域的挑战。理解碰撞隔舱的角色和重要性对于任何参与海洋作业的人来说都是必不可少的，因为它代表了在航运中改善安全性和可靠性的持续努力中的关键元素。