clearance limit

简明释义

间隙限度

英英释义

例句

1.Before entering the controlled airspace, the pilot confirmed the clearance limit 放行限制 with the tower.

在进入受控空域之前，飞行员向塔台确认了放行限制 clearance limit。

2.The pilot was informed that the clearance limit 放行限制 for their flight was set at a lower altitude due to weather conditions.

飞行员被告知，由于天气条件，他们航班的放行限制 clearance limit 被设定在较低的高度。

3.Air traffic control advised the aircraft to hold at the clearance limit 放行限制 until further instructions were provided.

空中交通管制建议飞机在放行限制 clearance limit 处保持，直到提供进一步指示。

4.The clearance limit 放行限制 was updated to ensure safety during the busy air traffic period.

为了确保在繁忙的空中交通期间的安全，放行限制 clearance limit 被更新。

5.During the descent, the crew received a notification about their clearance limit 放行限制 for landing.

在下降过程中，机组人员收到了关于他们着陆的放行限制 clearance limit 的通知。

作文

In the world of aviation, safety is paramount, and one of the key concepts that pilots must understand is the clearance limit. The term clearance limit refers to a point in space or a designated location where an aircraft is permitted to proceed without further air traffic control (ATC) instructions. This concept is crucial for maintaining order in the sky and ensuring that aircraft do not collide with each other while navigating through controlled airspace. When a pilot receives a clearance limit, it indicates the end of their current clearance from ATC, meaning they can continue flying to that specified point. However, once they reach this limit, they must await new instructions before proceeding further. This procedure is essential in busy air traffic environments, where multiple aircraft are often operating in close proximity. By establishing clearance limits, ATC can manage the flow of air traffic efficiently, preventing congestion and potential accidents.Understanding the implications of a clearance limit is vital for pilots. For instance, if a pilot receives a clearance limit to a waypoint but does not receive further instructions to continue, they must hold their position until ATC provides additional guidance. This can involve circling in a holding pattern or maintaining altitude at the clearance limit until further notice. The ability to interpret and act upon these instructions is a fundamental skill for any pilot, as it directly impacts the safety of all passengers on board.Moreover, the clearance limit is not only relevant during the flight but also during the approach and landing phases. As aircraft prepare to land at busy airports, ATC will often assign clearance limits to ensure that planes are spaced adequately apart. This spacing helps prevent go-arounds, which can be costly and time-consuming for airlines. Pilots must stay vigilant and responsive to any changes in their clearance limit, especially during these critical phases of flight.In addition to its role in air traffic control, the concept of a clearance limit can be applied to various fields outside of aviation. For example, in project management, a clearance limit might refer to the point at which a project team must halt progress until they receive approval for the next phase. This ensures that resources are allocated efficiently and that all stakeholders are aligned before moving forward.In conclusion, the term clearance limit plays a significant role in both aviation and other domains where clear communication and safety are paramount. For pilots, understanding and adhering to clearance limits is critical for ensuring safe and efficient operations in the air. As we continue to advance in technology and air traffic management systems, the importance of clear guidelines like clearance limits will remain integral to the safety and efficiency of our skies. In essence, whether in the cockpit or in project meetings, knowing when to pause and await further instructions can make all the difference in achieving successful outcomes.

在航空领域，安全至关重要，而飞行员必须理解的一个关键概念是清除限制。术语清除限制指的是一个空间点或指定位置，飞机被允许在没有进一步的空中交通管制（ATC）指示的情况下继续飞行。这个概念对于维持空中的秩序和确保飞机在控制空域内导航时不会相互碰撞至关重要。当飞行员接收到清除限制时，这表示他们从ATC处获得的当前许可的结束，这意味着他们可以继续飞往指定的地点。然而，一旦到达这个限制，他们必须等待新的指示才能进一步前进。在繁忙的空中交通环境中，这一程序至关重要，因为多架飞机通常在靠近的情况下操作。通过建立清除限制，ATC可以有效地管理空中交通流量，防止拥堵和潜在的事故。理解清除限制的含义对飞行员至关重要。例如，如果飞行员接收到一个航路点的清除限制但没有收到进一步的指示继续，他们必须在ATC提供额外指导之前保持其位置。这可能涉及在保持模式中盘旋或在清除限制处保持高度，直到另行通知。解读并对这些指示采取行动的能力是任何飞行员的基本技能，因为这直接影响到机上所有乘客的安全。此外，清除限制不仅在飞行期间相关，在进近和着陆阶段也同样重要。当飞机在繁忙的机场准备降落时，ATC通常会分配清除限制以确保飞机之间的间隔足够。这种间隔有助于防止复飞，这对航空公司来说可能是昂贵且耗时的。飞行员必须保持警惕，并对清除限制的任何变化做出反应，尤其是在这些关键的飞行阶段。除了在空中交通管制中的作用外，清除限制的概念也可以应用于航空以外的各种领域。例如，在项目管理中，清除限制可能指的是项目团队必须停止进展的点，直到他们获得下一阶段的批准。这确保资源的有效分配，并且在继续之前所有利益相关者都达成一致。总之，术语清除限制在航空和其他需要明确沟通和安全的领域中发挥着重要作用。对于飞行员来说，理解和遵守清除限制对于确保空中安全和高效的操作至关重要。随着我们在技术和空中交通管理系统方面的不断进步，像清除限制这样的明确指导的重要性将继续成为我们天空安全和效率的核心。本质上，无论是在驾驶舱还是在项目会议中，知道何时暂停并等待进一步的指示都可以在实现成功结果中发挥重要作用。