clearance leakage

简明释义

间隙漏泄

英英释义

例句

1.The design team is working on new methods to minimize clearance leakage in future products.

设计团队正在研究新方法，以最小化未来产品中的泄漏间隙。

2.To improve efficiency, we need to reduce the clearance leakage in our hydraulic systems.

为了提高效率，我们需要减少液压系统中的泄漏间隙。

3.Excessive clearance leakage can lead to decreased performance and increased energy consumption.

过多的泄漏间隙会导致性能下降和能耗增加。

4.The engineer noted that the clearance leakage was higher than expected, indicating potential issues with the seal.

工程师注意到泄漏间隙高于预期，表明密封可能存在潜在问题。

5.During the inspection, the technician discovered significant clearance leakage in the valve assembly.

在检查过程中，技术人员发现阀门组件中存在显著的泄漏间隙。

作文

In the world of engineering and fluid dynamics, understanding the concept of clearance leakage is crucial for designing efficient systems. Clearance leakage refers to the unintended flow of fluids through gaps or spaces in mechanical components, which can lead to significant energy losses and decreased performance. This phenomenon is particularly relevant in applications such as hydraulic systems, pumps, and turbines, where precise control of fluid movement is essential for optimal operation.To illustrate the importance of clearance leakage, consider a hydraulic pump that relies on a tightly sealed environment to function effectively. If there are gaps between the moving parts of the pump, fluid may leak out, resulting in reduced pressure and flow rate. This not only diminishes the pump's efficiency but can also cause overheating and increased wear on components, ultimately leading to premature failure. Therefore, engineers must take clearance leakage into account during the design phase to ensure that their systems operate reliably and economically.Moreover, clearance leakage is not limited to hydraulic systems; it is also a significant concern in the field of gas turbines. In these systems, the clearance between rotating blades and stationary components is critical for maintaining performance. If the clearance is too large, air can escape, reducing the overall efficiency of the turbine. Engineers often use advanced materials and coatings to minimize clearance leakage and enhance the durability of turbine components under extreme operating conditions.The impact of clearance leakage extends beyond just efficiency; it can also have environmental implications. For example, in oil and gas industries, leaks due to inadequate sealing can result in spills that pose serious risks to ecosystems and public health. By addressing clearance leakage through better design and maintenance practices, companies can reduce their environmental footprint and adhere to regulatory standards.In conclusion, clearance leakage is a vital consideration in the design and operation of various mechanical systems. By understanding its causes and effects, engineers can create more efficient, reliable, and environmentally friendly solutions. As technology advances, the ability to accurately measure and mitigate clearance leakage will become increasingly important, paving the way for innovations in fluid dynamics and mechanical engineering.

在工程和流体动力学的世界中，理解清除泄漏的概念对于设计高效的系统至关重要。清除泄漏是指流体通过机械部件中的间隙或空间的意外流动，这可能导致显著的能量损失和性能下降。这种现象在液压系统、泵和涡轮等应用中尤其相关，因为在这些应用中，精确控制流体运动对最佳操作是必不可少的。为了说明清除泄漏的重要性，考虑一个依赖于紧密密封环境有效运作的液压泵。如果泵的运动部件之间存在间隙，流体可能会泄漏，从而导致压力和流量降低。这不仅降低了泵的效率，还可能导致过热和部件磨损增加，最终导致提前故障。因此，工程师必须在设计阶段考虑清除泄漏，以确保他们的系统可靠且经济地运行。此外，清除泄漏不仅限于液压系统；它在燃气涡轮领域也是一个重要问题。在这些系统中，旋转叶片与静止部件之间的间隙对于保持性能至关重要。如果间隙过大，空气可能会逸出，从而降低涡轮的整体效率。工程师通常使用先进的材料和涂层来最小化清除泄漏并增强涡轮部件在极端工作条件下的耐用性。清除泄漏的影响不仅限于效率；它还可能具有环境影响。例如，在石油和天然气行业，由于密封不当造成的泄漏可能导致溢出，对生态系统和公众健康构成严重风险。通过通过更好的设计和维护实践解决清除泄漏，公司可以减少其环境足迹，并遵守监管标准。总之，清除泄漏是在各种机械系统的设计和操作中至关重要的考虑因素。通过理解其原因和影响，工程师可以创造出更高效、更可靠且更环保的解决方案。随着技术的进步，准确测量和减轻清除泄漏的能力将变得越来越重要，为流体动力学和机械工程的创新铺平道路。