chain girth

简明释义

链围长

英英释义

例句

1.A larger chain girth 链条周长 can affect the performance of the motorbike.

较大的链条周长可能会影响摩托车的性能。

2.Adjusting the chain girth 链条周长 can help in reducing wear on the gears.

调整链条周长可以帮助减少齿轮的磨损。

3.To ensure proper tension, measure the chain girth 链条周长 before installation.

在安装之前，测量一下链条周长以确保适当的张力。

4.The recommended chain girth 链条周长 for this bicycle model is 120 cm.

这个自行车型号推荐的链条周长是120厘米。

5.When replacing the chain, always check the chain girth 链条周长 to match the sprocket size.

更换链条时，务必检查链条周长以匹配齿轮尺寸。

作文

In the world of engineering and mechanics, precision is key to ensuring the functionality and reliability of various systems. One such term that often comes up in discussions about mechanical systems is chain girth. The chain girth refers to the total length or circumference of a chain when it is laid out flat or measured around its outer edges. This measurement is crucial for understanding how a chain will perform under different conditions, including tension, load bearing, and wear over time.Understanding the chain girth is essential for several reasons. Firstly, it plays a significant role in determining the appropriate size of sprockets that will interact with the chain. If the chain girth is not accurately measured, it could lead to misalignment between the chain and the sprocket, resulting in inefficient power transmission and potential mechanical failure. Engineers must ensure that the chain girth matches the specifications of the sprockets to maintain optimal performance.Moreover, the chain girth is vital when calculating the load capacity of a chain system. Chains are commonly used in various applications, from bicycles to heavy machinery. Each type of chain has a specific chain girth that correlates with its strength and durability. By understanding the chain girth, engineers can select the right chain for the job, ensuring it can handle the required load without risk of breaking or excessive wear.In addition to performance considerations, the chain girth also affects maintenance schedules. Chains that are too tight or too loose can lead to increased wear and tear. By regularly measuring the chain girth and making necessary adjustments, operators can extend the life of the chain and reduce the likelihood of costly repairs. This proactive approach to maintenance is critical in industries where downtime can result in significant financial losses.Furthermore, the chain girth is a key factor in the design of custom chain solutions. In cases where standard chains do not meet specific requirements, engineers may need to create bespoke chains with unique dimensions. Understanding the chain girth allows them to tailor the design to fit the intended application perfectly. This customization can enhance efficiency and effectiveness in various industrial processes.In conclusion, the concept of chain girth is integral to the fields of engineering and mechanics. It serves as a foundational measurement that influences the design, selection, and maintenance of chain systems. By grasping the importance of chain girth, engineers and technicians can better ensure the reliability and longevity of the machinery they work with. As technology continues to evolve, the principles surrounding chain girth will remain relevant, highlighting the ongoing need for precision and attention to detail in mechanical design and maintenance practices.

在工程和机械的世界中，精确性是确保各种系统功能和可靠性的关键。一个常常在机械系统讨论中出现的术语是链条周长。链条周长指的是链条平铺或沿其外缘测量时的总长度或周长。这一测量对于理解链条在不同条件下的表现至关重要，包括张力、承载能力和随时间的磨损。理解链条周长非常重要，原因有很多。首先，它在确定将与链条交互的齿轮适当尺寸方面发挥着重要作用。如果链条周长测量不准确，可能导致链条与齿轮之间的错位，导致动力传输效率低下和潜在的机械故障。工程师必须确保链条周长与齿轮的规格相匹配，以维持最佳性能。此外，链条周长在计算链条系统的承载能力时也至关重要。链条广泛应用于各种场合，从自行车到重型机械。每种类型的链条都有特定的链条周长，与其强度和耐久性相关。通过理解链条周长，工程师可以选择合适的链条，确保其能够承受所需的负载而不至于断裂或过度磨损。除了性能考虑，链条周长还影响维护计划。过紧或过松的链条会导致增加的磨损。通过定期测量链条周长并进行必要的调整，操作人员可以延长链条的使用寿命并减少昂贵维修的可能性。这种对维护的主动管理在停机会导致重大财务损失的行业中至关重要。此外，链条周长是设计定制链条解决方案的关键因素。在标准链条无法满足特定要求的情况下，工程师可能需要创建具有独特尺寸的定制链条。理解链条周长使他们能够完美地调整设计以适应预期应用。这种定制可以提高各种工业过程的效率和有效性。总之，链条周长的概念在工程和机械领域中是不可或缺的。它作为一个基础测量，影响着链条系统的设计、选择和维护。通过掌握链条周长的重要性，工程师和技术人员可以更好地确保他们所工作的机械的可靠性和耐久性。随着技术的不断发展，围绕链条周长的原则将继续保持相关性，突显出在机械设计和维护实践中对精确性和细节关注的持续需求。