bilge plug

简明释义

舭泄水塞

英英释义

例句

1.During maintenance, check if the bilge plug is in good condition.

在维护期间，检查一下舱底塞是否处于良好状态。

2.Always replace the bilge plug after cleaning the bilge to prevent water ingress.

在清洁舱底后，务必重新安装舱底塞以防止水进入。

3.If water accumulates in the hull, you might need to remove the bilge plug to drain it.

如果船体内积水，你可能需要拆掉舱底塞来排水。

4.Before launching the boat, make sure to check the bilge plug for any leaks.

在下水前，确保检查一下舱底塞是否有泄漏。

5.The bilge plug should be securely fastened to avoid losing it while sailing.

为了避免在航行时丢失，舱底塞应牢牢固定。

作文

The bilge area of a boat is a crucial part of its design and functionality. It is the lowest compartment on a ship, where water that has leaked or accumulated collects. To prevent this water from causing damage or instability, a device called a bilge plug is utilized. The bilge plug is a simple yet essential component that helps to keep the vessel safe and seaworthy. When the boat is in use, the bilge plug can be removed to allow any unwanted water to drain out, ensuring that the bilge remains dry and does not affect the boat's performance. Understanding the importance of the bilge plug is vital for anyone who owns or operates a boat. Neglecting the maintenance of the bilge plug can lead to serious consequences. If the plug is damaged or not properly sealed, water can enter the bilge area, leading to potential flooding. This not only poses a risk to the vessel itself but also to the safety of those on board. Therefore, regular inspections of the bilge plug and its surrounding areas are necessary to ensure that everything is functioning correctly.In addition to its primary function of draining water, the bilge plug also serves as a barrier against unwanted substances entering the bilge. For example, if there are oil leaks or other contaminants, a properly functioning bilge plug can help prevent these substances from mixing with the bilge water. This is particularly important for environmental reasons, as discharging contaminated water into the ocean can have devastating effects on marine life.For boaters, knowing how to operate and maintain the bilge plug is part of essential boating skills. Before setting out on a journey, it is advisable to check that the bilge plug is securely in place. If the boat is going to be anchored for a long period, the bilge plug should be removed to allow any rainwater to escape. Conversely, when preparing for departure, the bilge plug must be reinserted to prevent water from entering while the boat is in motion.In conclusion, the bilge plug may seem like a small and insignificant part of a boat, but its role is undeniably critical. It not only aids in maintaining the boat’s buoyancy and stability but also plays a key role in protecting the marine environment. Therefore, understanding and caring for the bilge plug is an essential responsibility for every boat owner and operator. By ensuring that this simple device is in good condition, boaters can enjoy their time on the water safely and responsibly.

船只的舱底区域是其设计和功能中至关重要的一部分。它是船上最低的舱室，水在这里泄漏或积聚。为了防止这些水对船只造成损害或不稳定，会使用一个叫做舱底塞的装置。舱底塞是一个简单但必不可少的组件，有助于保持船只安全和适航。当船只在使用时，可以拆卸舱底塞以允许任何多余的水排出，确保舱底保持干燥，不会影响船只的性能。理解舱底塞的重要性对于任何拥有或操作船只的人来说都是至关重要的。忽视舱底塞的维护可能导致严重后果。如果塞子损坏或未正确密封，水可能会进入舱底区域，导致潜在的洪水。这不仅对船只本身构成风险，也对船上人员的安全构成威胁。因此，定期检查舱底塞及其周围区域是必要的，以确保一切正常运作。除了排水的主要功能外，舱底塞还充当防止不必要物质进入舱底的屏障。例如，如果有油泄漏或其他污染物，正常运作的舱底塞可以帮助防止这些物质与舱底水混合。这对于环境原因尤为重要，因为将污染水排放到海洋中可能对海洋生物造成毁灭性的影响。对于船主来说，了解如何操作和维护舱底塞是基本的航海技能。在出发前，建议检查舱底塞是否牢固到位。如果船只将要停泊很长时间，则应拆卸舱底塞以允许雨水排出。相反，在准备出发时，必须重新插入舱底塞以防止水在船只运动时进入。总之，舱底塞可能看起来是船只一个小而微不足道的部分，但其作用无疑是至关重要的。它不仅有助于维持船只的浮力和稳定性，还在保护海洋环境方面发挥关键作用。因此，理解和照顾舱底塞是每个船主和操作者的重要责任。通过确保这个简单的装置处于良好状态，船主可以安全、负责任地享受他们在水上的时光。