capsize criterian

简明释义

倾覆衡准

英英释义

例句

1.To avoid accidents, sailors should be familiar with the capsize criterion 翻覆标准 for their specific type of vessel.

为了避免事故，水手应熟悉他们特定类型船只的翻覆标准 capsize criterion。

2.The design of the boat must adhere to the capsize criterion 翻覆标准 to ensure safety during rough seas.

船只的设计必须遵守翻覆标准 capsize criterion以确保在恶劣海况下的安全。

3.During the safety inspection, the inspector checked if the boat met the capsize criterion 翻覆标准.

在安全检查中，检查员核实了船只是否符合翻覆标准 capsize criterion。

4.Engineers evaluated the vessel's stability against the capsize criterion 翻覆标准 before it was launched.

工程师在船只下水前评估了其稳定性是否符合翻覆标准 capsize criterion。

5.The capsize criterion 翻覆标准 is crucial for determining the maximum load a yacht can carry.

对于确定游艇可以承载的最大负荷，翻覆标准 capsize criterion至关重要。

作文

In the realm of maritime safety, understanding the concept of capsize criterian is essential for ensuring the stability and safety of vessels. The term capsize criterian refers to the set of conditions or parameters that determine whether a boat or ship is at risk of capsizing, which means turning over in the water. This phenomenon can occur due to various factors, including the vessel's design, weight distribution, and external environmental influences such as wind and waves. The importance of adhering to the capsize criterian cannot be overstated. For instance, when designing a new vessel, engineers must carefully consider the weight and balance of the ship. If the center of gravity is too high or if the weight is unevenly distributed, the vessel may become unstable and more susceptible to capsizing. Additionally, the shape of the hull plays a critical role in how a ship interacts with water. A well-designed hull will help maintain stability even in rough seas.Furthermore, the capsize criterian is not only relevant during the design phase but also during operation. Crew members must be trained to understand the limits of their vessel and to recognize the signs of potential instability. For example, if a ship is heavily loaded or if it encounters unusually high waves, the crew should take immediate action to redistribute weight or alter the course to minimize the risk of capsizing. Weather conditions are another crucial aspect that affects the capsize criterian. Strong winds can create significant challenges for any vessel, especially smaller boats. Sailors must be aware of the forecast and make informed decisions based on the expected weather conditions. Ignoring these factors can lead to dangerous situations where the risk of capsizing increases dramatically. In addition to natural elements, human error can also contribute to a vessel exceeding its capsize criterian. Poor decision-making, lack of experience, or failure to follow safety protocols can result in catastrophic outcomes. Therefore, it is vital for all maritime operators to prioritize safety training and adhere to established guidelines to mitigate risks effectively. The implications of failing to recognize and respect the capsize criterian can be severe. Capsizing can lead to loss of life, property damage, and environmental disasters. It is imperative that both recreational and commercial operators remain vigilant and proactive in assessing their vessels' stability. Regular inspections, maintenance, and compliance with safety regulations are essential practices to ensure that vessels remain within their safe operational limits. In conclusion, the capsize criterian serves as a fundamental guideline for maintaining the safety and integrity of maritime operations. By understanding the factors that contribute to a vessel's stability and taking appropriate measures to address them, mariners can significantly reduce the risk of capsizing. Education, awareness, and adherence to safety protocols are key components in fostering a culture of safety on the water. As we continue to explore and utilize our oceans, respecting the capsize criterian will be paramount to ensuring safe and enjoyable maritime experiences.

在海事安全领域，理解“翻船标准”的概念对于确保船只的稳定性和安全性至关重要。术语“翻船标准”指的是一组条件或参数，这些条件或参数决定了船只是否面临翻船的风险，即在水中翻转。这种现象可能由于多种因素而发生，包括船只的设计、重心分布以及外部环境影响，如风和波浪。遵循“翻船标准”的重要性不容低估。例如，在设计新船时，工程师必须仔细考虑船只的重量和平衡。如果重心过高或重量分布不均，船只可能变得不稳定，更容易翻船。此外，船体的形状在船只与水的相互作用中也起着关键作用。设计良好的船体即使在恶劣海况下也能帮助保持稳定。此外，“翻船标准”不仅在设计阶段相关，在操作过程中也同样重要。船员必须接受训练，以了解他们船只的极限，并识别潜在不稳定的迹象。例如，如果一艘船负载过重，或者遇到异常高的波浪，船员应立即采取措施重新分配重量或改变航向，以最小化翻船的风险。天气条件是影响“翻船标准”的另一个关键因素。强风对任何船只，尤其是较小的船只，都会造成重大挑战。水手必须了解天气预报，并根据预期的天气条件做出明智的决策。忽视这些因素可能导致危险情况，使翻船的风险大幅增加。除了自然因素，人为错误也可能导致船只超过其“翻船标准”。决策失误、缺乏经验或未能遵循安全协议可能导致灾难性后果。因此，所有海事运营商都必须优先考虑安全培训，并遵循既定指导方针，以有效减轻风险。未能认识和尊重“翻船标准”的后果可能是严重的。翻船可能导致生命损失、财产损失和环境灾难。因此，无论是休闲还是商业运营者，都必须保持警惕，主动评估其船只的稳定性。定期检查、维护和遵守安全法规是确保船只保持在安全操作范围内的基本做法。总之，“翻船标准”作为维护海事操作安全和完整性的基本指南。通过理解影响船只稳定性的因素并采取适当措施来应对这些因素，海员可以显著降低翻船的风险。教育、意识和遵循安全协议是培养水上安全文化的关键组成部分。随着我们继续探索和利用海洋，尊重“翻船标准”对于确保安全和愉快的海事体验至关重要。