breadth amidships

简明释义

船中部宽度

英英释义

例句

1.When calculating the breadth amidships, engineers must consider the overall dimensions of the vessel.

在计算中部宽度时，工程师必须考虑船只的整体尺寸。

2.The yacht's design features a maximum breadth amidships that enhances stability during rough seas.

这艘游艇的设计在最大中部宽度上具有增强在恶劣海况下的稳定性。

3.The breadth amidships is crucial for determining the vessel's turning radius.

中部宽度对于确定船只的转弯半径至关重要。

4.A greater breadth amidships can improve cargo capacity on commercial ships.

更大的中部宽度可以提高商船的货物容量。

5.During the survey, the inspector measured the breadth amidships to ensure compliance with safety regulations.

在检查过程中，检查员测量了中部宽度以确保符合安全规定。

作文

When discussing the design and construction of ships, various terminologies are used to convey specific measurements and characteristics. One such term that is crucial in naval architecture is breadth amidships. This phrase refers to the width of a ship at its widest point, which is typically located at the midsection or 'amidships' of the vessel. Understanding this measurement is essential for several reasons, including stability, cargo capacity, and overall performance of the ship. The breadth amidships plays a significant role in determining how a ship interacts with water. A wider beam can enhance stability, allowing the vessel to withstand rough seas without capsizing. This is particularly important for commercial vessels that carry heavy loads or operate in challenging marine environments. Conversely, a narrower breadth can improve speed and maneuverability, making it beneficial for smaller boats or racing yachts. Therefore, naval architects must carefully consider the intended use of the vessel when designing its breadth amidships. Moreover, the breadth amidships directly influences the ship's cargo capacity. A wider ship can accommodate more cargo, which is vital for freight vessels that aim to maximize profits. However, there is a balance to strike; if a ship is too wide, it may face restrictions in certain ports or waterways. Thus, understanding the implications of breadth amidships is crucial for shipowners and operators who wish to optimize their vessels for efficiency and compliance with maritime regulations. In addition to practical considerations, the breadth amidships also affects the aesthetic appeal of a ship. A well-proportioned vessel with an appropriate beam often attracts attention and admiration. Designers and builders take pride in creating ships that not only perform well but also look pleasing to the eye. The right breadth amidships can contribute to a ship's sleek lines and overall beauty, enhancing its marketability. Furthermore, advancements in technology have allowed for more precise calculations regarding the breadth amidships and its effects on ship performance. Computer-aided design (CAD) software enables architects to simulate various designs and assess how changes in breadth will impact stability, speed, and fuel efficiency. This technological progress has led to the construction of more efficient vessels that meet modern demands while adhering to environmental standards. In conclusion, the term breadth amidships encompasses more than just a simple measurement; it is a vital aspect of ship design that influences stability, cargo capacity, aesthetics, and technological advancements. For anyone involved in naval architecture or maritime operations, a thorough understanding of this concept is essential. By appreciating the significance of breadth amidships, one can better grasp the complexities of shipbuilding and the factors that contribute to a vessel's success on the water.

在讨论船舶的设计和建造时，使用各种术语来传达特定的测量和特征。其中一个在海洋建筑中至关重要的术语是breadth amidships。这个短语指的是船舶在其最宽处的宽度，通常位于船只的中部或“amidships”。理解这个测量对于多个原因至关重要，包括稳定性、货物容量和船舶的整体性能。
breadth amidships在决定船舶与水的相互作用中发挥着重要作用。更宽的船体可以提高稳定性，使船舶能够在恶劣的海况中抵御翻覆。这对于承载重载或在挑战性的海洋环境中运营的商业船舶尤为重要。相反，更窄的宽度可以提高速度和机动性，使其对较小的船只或竞赛游艇更有利。因此，海洋建筑师在设计船舶的breadth amidships时必须仔细考虑船舶的预期用途。
此外，breadth amidships直接影响船舶的货物容量。更宽的船舶可以容纳更多的货物，这对于旨在最大化利润的货运船舶至关重要。然而，需要找到一个平衡；如果船舶过宽，可能会在某些港口或水道面临限制。因此，理解breadth amidships的影响对于希望优化其船舶以提高效率和遵守海事法规的船东和运营商至关重要。
除了实际考虑外，breadth amidships还影响船舶的美学吸引力。比例协调的船舶，其适当的宽度通常会吸引注意和赞赏。设计师和建造者为创造不仅性能优良而且外观令人愉悦的船舶而感到自豪。合适的breadth amidships可以增强船舶的流线型外观和整体美感，提高其市场竞争力。
此外，技术的进步使得对breadth amidships及其对船舶性能影响的更精确计算成为可能。计算机辅助设计（CAD）软件使建筑师能够模拟各种设计，并评估宽度变化将如何影响稳定性、速度和燃油效率。这一技术进步导致了更高效船舶的建造，满足现代需求，同时遵循环境标准。
总之，术语breadth amidships不仅仅包含一个简单的测量；它是船舶设计的重要方面，影响稳定性、货物容量、美学和技术进步。对于任何参与海洋建筑或海事操作的人来说，深入理解这一概念至关重要。通过欣赏breadth amidships的重要性，人们可以更好地理解造船的复杂性以及影响船舶在水上成功的因素。