brake holding load

简明释义

制动拉力

英英释义

例句

1.During the inspection, the mechanic noted that the brake holding load was below the recommended level.

在检查中，机械师注意到制动保持负载低于推荐水平。

2.When testing the brakes, we need to measure the brake holding load to ensure they are functioning properly.

在测试刹车时，我们需要测量制动保持负载以确保它们正常工作。

3.It's important to understand the brake holding load when driving heavy vehicles.

在驾驶重型车辆时，了解制动保持负载是很重要的。

4.The technician explained that the brake holding load is crucial for ensuring the safety of the vehicle during maintenance.

技术人员解释说，制动保持负载对确保车辆在维护期间的安全至关重要。

5.A higher brake holding load can indicate better brake performance under load conditions.

较高的制动保持负载可能表明在负载条件下刹车性能更好。

作文

The concept of brake holding load is crucial in various mechanical and engineering applications. Understanding this term can significantly enhance our comprehension of how braking systems function, especially in vehicles and machinery. When we refer to brake holding load, we are essentially talking about the amount of load or force that a brake system can hold without allowing the vehicle or machine to move. This is particularly important for safety and operational efficiency.In practical terms, when a vehicle comes to a stop, the brakes must engage effectively to prevent it from rolling backward or forward, especially on inclines. The brake holding load determines how much weight the brakes can hold while the vehicle is stationary. For instance, if a truck is parked on a hill, the brake holding load must be sufficient to counteract the gravitational pull acting on the truck's mass. If the brakes cannot hold this load, there is a risk of the vehicle rolling away, which could lead to accidents.In engineering design, understanding the brake holding load is essential when selecting the appropriate brake system for a specific application. Engineers must calculate the forces involved, including the weight of the vehicle or machine, the slope of the surface, and any additional loads that may be applied. This calculation ensures that the braking system is designed to handle the maximum expected load safely.Moreover, the brake holding load is also relevant in the context of various industries, such as construction, manufacturing, and transportation. For example, in construction, cranes and other lifting equipment rely on effective braking systems to hold heavy loads securely. The brake holding load becomes a critical factor in ensuring that these loads do not fall or shift unexpectedly, which could cause severe injuries or damage.Additionally, regular maintenance of braking systems is vital to ensure they can handle the required brake holding load. Over time, brake components can wear down, reducing their effectiveness. It is essential for operators and maintenance personnel to conduct routine checks and replace worn parts to maintain the integrity of the braking system. Failing to do so could result in an inability to hold the necessary load, leading to dangerous situations.In conclusion, the term brake holding load encompasses a fundamental aspect of braking systems in vehicles and machinery. Understanding this concept is essential for engineers, operators, and anyone involved in the design and maintenance of braking systems. It ensures safety, operational efficiency, and reliability in various applications. By grasping the significance of brake holding load, we can appreciate the intricate balance between force, weight, and safety in our daily interactions with machines and vehicles.

“制动保持载荷”这一概念在各种机械和工程应用中至关重要。理解这个术语可以显著增强我们对制动系统功能的理解，特别是在车辆和机械中。当我们提到“制动保持载荷”时，我们实际上是在谈论制动系统能够在不允许车辆或机器移动的情况下所能承受的负载或力。这对于安全性和操作效率尤其重要。在实际意义上，当一辆车停下来时，制动器必须有效地接合，以防止其向后或向前滚动，尤其是在斜坡上。“制动保持载荷”决定了制动器在车辆静止时能够承受多少重量。例如，如果一辆卡车停在山坡上，“制动保持载荷”必须足够抵消作用于卡车质量的重力。如果制动器无法保持这个载荷，就有车辆滚动的风险，这可能导致事故。在工程设计中，了解“制动保持载荷”在选择特定应用的适当制动系统时至关重要。工程师必须计算涉及的力，包括车辆或机器的重量、表面的坡度以及可能施加的任何附加载荷。这个计算确保制动系统的设计能够安全地处理最大预期载荷。此外，“制动保持载荷”在建筑、制造和运输等各个行业中也具有相关性。例如，在建筑中，起重机和其他起重设备依赖有效的制动系统来安全地保持重载。“制动保持载荷”成为确保这些载荷不会意外掉落或移动的关键因素，这可能会导致严重的伤害或损坏。此外，定期维护制动系统对于确保它们能够承受所需的“制动保持载荷”至关重要。随着时间的推移，制动组件可能会磨损，降低其有效性。操作员和维护人员进行例行检查并更换磨损部件以保持制动系统的完整性至关重要。未能做到这一点可能导致无法保持必要的载荷，从而导致危险情况。总之，术语“制动保持载荷”涵盖了车辆和机械制动系统的基本方面。理解这个概念对工程师、操作员以及参与制动系统设计和维护的任何人都至关重要。它确保了各种应用中的安全性、操作效率和可靠性。通过掌握“制动保持载荷”的重要性，我们可以欣赏到在日常与机器和车辆互动中，力、重量和安全之间的微妙平衡。