bracing wire

简明释义

拉索

英英释义

例句

1.Before pouring the concrete, make sure the bracing wire is properly installed.

在倒入混凝土之前，确保支撑线安装正确。

2.The fence was reinforced with bracing wire to withstand strong winds.

围栏用支撑线加固，以抵御强风。

3.We need to check the tension of the bracing wire before proceeding with the project.

在继续项目之前，我们需要检查支撑线的张力。

4.The architect specified the use of bracing wire in the design to enhance stability.

建筑师在设计中指定使用支撑线以增强稳定性。

5.The construction team used bracing wire to stabilize the steel framework of the building.

施工队使用支撑线来稳定建筑的钢框架。

作文

In the world of construction and engineering, the importance of structural integrity cannot be overstated. Every building, bridge, and infrastructure project requires careful planning and execution to ensure that they can withstand various forces and loads. One crucial element often used in this process is the bracing wire, which plays a significant role in enhancing the stability of structures. bracing wire refers to a type of wire used to provide support and rigidity to a structure, preventing it from swaying or collapsing under stress.When constructing tall buildings or towers, engineers must consider the effects of wind and seismic activity. These forces can cause a structure to sway, leading to potential failure if not adequately addressed. This is where bracing wire comes into play. By strategically placing bracing wire throughout the framework, engineers can effectively distribute these forces, allowing the building to remain stable even under extreme conditions.The installation of bracing wire is a meticulous process that requires precision and expertise. It is typically made from high-strength materials to ensure durability and effectiveness. The wire is tensioned and anchored at various points, creating a network of support that reinforces the overall structure. This technique is commonly seen in the construction of telecommunications towers, transmission lines, and even residential buildings in areas prone to earthquakes.Moreover, bracing wire is not only limited to vertical structures. It can also be utilized in horizontal applications, such as in trusses and beams, where additional support is needed to prevent bending and buckling. For instance, in a roof truss system, bracing wire can help distribute the weight of the roofing materials evenly, ensuring that the entire structure remains intact over time.The advantages of using bracing wire extend beyond mere structural support. It also contributes to cost-effectiveness in construction projects. By enhancing the stability of a building, less material may be required for other structural elements, ultimately reducing overall construction costs. Additionally, buildings that incorporate bracing wire tend to have longer lifespans, which translates to lower maintenance costs in the long run.However, the use of bracing wire is not without its challenges. Engineers must carefully calculate the amount of tension required and ensure that the wire is installed correctly to avoid any potential failures. Improper installation can lead to catastrophic results, making it essential for professionals in the field to have a thorough understanding of the principles behind bracing wire applications.In conclusion, bracing wire is an indispensable component in modern construction and engineering. Its ability to provide stability and support to structures makes it a vital tool for engineers and builders alike. As we continue to push the boundaries of architectural design and construction techniques, the role of bracing wire will undoubtedly remain significant in ensuring the safety and longevity of our built environment. Understanding the function and application of bracing wire is crucial for anyone involved in the construction industry, as it exemplifies the intersection of innovation and practicality in engineering solutions.

在建筑和工程的世界中，结构完整性的重视程度不容小觑。每一座建筑、桥梁和基础设施项目都需要经过仔细的规划和执行，以确保它们能够承受各种力量和负荷。其中一个关键要素就是bracing wire，它在增强结构稳定性方面发挥着重要作用。bracing wire是指用于为结构提供支撑和刚度的一种电线，可以防止其在压力下摇摆或倒塌。在建造高楼或塔楼时，工程师必须考虑风力和地震活动的影响。这些力量可能导致结构摇摆，如果没有得到适当处理，可能会导致潜在的失败。这就是bracing wire发挥作用的地方。通过在框架中战略性地放置bracing wire，工程师可以有效地分配这些力量，使建筑即使在极端条件下也能保持稳定。安装bracing wire是一个需要精确和专业知识的细致过程。它通常由高强度材料制成，以确保耐用性和有效性。电线被拉紧并固定在各个点上，形成一个支撑网络，增强整个结构。这种技术通常出现在电信塔、输电线路，甚至是地震多发地区的住宅建筑的建设中。此外，bracing wire不仅限于垂直结构。它还可以用于水平应用，例如在桁架和梁中，当需要额外支撑以防止弯曲和屈曲时。例如，在屋顶桁架系统中，bracing wire可以帮助均匀分配屋面材料的重量，确保整个结构随时间保持完整。使用bracing wire的优势不仅仅局限于结构支撑。它还为建筑项目的成本效益做出了贡献。通过增强建筑的稳定性，可能减少对其他结构元素的材料需求，最终降低整体建筑成本。此外，纳入bracing wire的建筑往往具有更长的使用寿命，这意味着长期来看维护成本较低。然而，使用bracing wire也并非没有挑战。工程师必须仔细计算所需的张力，并确保电线正确安装，以避免任何潜在的故障。不当安装可能导致灾难性后果，因此该领域的专业人员必须深入理解bracing wire应用背后的原理。总之，bracing wire是现代建筑和工程中不可或缺的组成部分。它为结构提供稳定性和支撑的能力使其成为工程师和建筑商的重要工具。随着我们不断推动建筑设计和施工技术的边界，bracing wire的角色无疑将在确保我们建筑环境的安全和耐久性方面保持重要。理解bracing wire的功能和应用对任何参与建筑行业的人来说都是至关重要的，因为它体现了工程解决方案中创新与实用性的交汇。