cylinder head stud

简明释义

汽缸头螺栓

英英释义

例句

1.The mechanic replaced the broken cylinder head stud to prevent engine leaks.

机械师更换了损坏的气缸盖螺柱以防止发动机漏油。

2.Make sure to torque the cylinder head stud to the manufacturer's specifications.

确保将气缸盖螺柱按照制造商的规格拧紧。

3.I had to buy a new set of cylinder head studs for my car's engine.

我不得不为我汽车的发动机购买一套新的气缸盖螺柱。

4.During the rebuild, we found that the cylinder head stud was corroded.

在重建过程中，我们发现气缸盖螺柱已经腐蚀。

5.The cylinder head stud plays a crucial role in holding the cylinder head in place.

在固定气缸头方面，气缸盖螺柱起着至关重要的作用。

作文

The engine of a vehicle is a complex machine composed of various components that work together to produce power. One of the essential parts of an engine is the cylinder head, which plays a crucial role in the overall functionality of the engine. The cylinder head is mounted on top of the engine block and contains the combustion chambers where fuel and air mix and ignite. To secure the cylinder head to the engine block, several fasteners are used, one of which is the cylinder head stud (气缸盖螺柱). These studs are critical for maintaining the integrity of the engine's structure and ensuring that it operates efficiently.The cylinder head stud (气缸盖螺柱) is a type of fastener that is designed to hold the cylinder head firmly in place against the engine block. Unlike regular bolts, studs are typically threaded on both ends, with one end screwed into the engine block and the other end protruding above the cylinder head. This design allows for a more even distribution of clamping force, which is vital for preventing leaks between the cylinder head and the engine block. When the engine is running, it generates a significant amount of heat and pressure, which can cause components to expand and contract. The cylinder head stud (气缸盖螺柱) must be able to withstand these forces while maintaining a tight seal.Proper installation of the cylinder head stud (气缸盖螺柱) is crucial for the longevity and performance of the engine. Mechanics often follow specific torque specifications when tightening these studs to ensure that they are secured correctly. Over-tightening can lead to the studs stretching or breaking, while under-tightening can result in a poor seal, leading to oil or coolant leaks. Therefore, understanding how to properly install and maintain cylinder head studs (气缸盖螺柱) is an important skill for anyone working on automotive engines.In addition to their structural importance, cylinder head studs (气缸盖螺柱) can also influence the overall performance of the engine. High-performance engines often utilize upgraded or aftermarket studs made from stronger materials, such as ARP (Automotive Racing Products) studs. These high-strength studs can handle greater amounts of pressure and temperature, making them suitable for racing applications or heavily modified engines. Upgrading to stronger cylinder head studs (气缸盖螺柱) can provide peace of mind for enthusiasts who push their vehicles to the limit.In conclusion, the cylinder head stud (气缸盖螺柱) is a small yet vital component of an engine that ensures the cylinder head remains securely fastened to the engine block. Its design allows for an even distribution of pressure, which is necessary for optimal engine performance. For anyone involved in automotive repair or modification, understanding the role and proper handling of cylinder head studs (气缸盖螺柱) is essential. Whether you are a professional mechanic or a DIY enthusiast, gaining knowledge about this component can significantly impact the reliability and efficiency of an engine.

汽车发动机是一个复杂的机器，由多个组件共同工作以产生动力。发动机的重要部分之一是气缸盖，它在发动机的整体功能中发挥着至关重要的作用。气缸盖安装在发动机缸体的顶部，包含燃烧室，在这里燃料和空气混合并点燃。为了将气缸盖固定在发动机缸体上，使用了几种紧固件，其中之一就是气缸盖螺柱（cylinder head stud）。这些螺柱对于保持发动机结构的完整性以及确保其高效运转至关重要。气缸盖螺柱（cylinder head stud）是一种设计用于将气缸盖牢固地固定在发动机缸体上的紧固件。与普通螺栓不同，螺柱通常两端都有螺纹，一端拧入发动机缸体，另一端则从气缸盖上方突出。这个设计允许更均匀地分配夹紧力，这对于防止气缸盖和发动机缸体之间的泄漏至关重要。当发动机运行时，会产生大量热量和压力，这可能导致组件膨胀和收缩。气缸盖螺柱（cylinder head stud）必须能够承受这些力量，同时保持良好的密封。气缸盖螺柱（cylinder head stud）的正确安装对于发动机的耐用性和性能至关重要。机械师通常遵循特定的扭矩规格来确保这些螺柱被正确固定。过度拧紧可能导致螺柱拉伸或断裂，而拧得不够则会导致密封不良，从而造成油或冷却液泄漏。因此，了解如何正确安装和维护气缸盖螺柱（cylinder head stud）是任何从事汽车发动机工作的人必备的重要技能。除了结构重要性外，气缸盖螺柱（cylinder head stud）还可以影响发动机的整体性能。高性能发动机通常使用升级或改装的螺柱，这些螺柱由更强的材料制成，例如ARP（汽车赛车产品）螺柱。这些高强度螺柱可以承受更大的压力和温度，使其适合赛车应用或重度改装的发动机。升级到更强的气缸盖螺柱（cylinder head stud）可以为那些将车辆推向极限的爱好者提供安心。总之，气缸盖螺柱（cylinder head stud）是发动机中一个小而重要的组成部分，它确保气缸盖牢固地固定在发动机缸体上。它的设计允许压力均匀分布，这是实现最佳发动机性能所必需的。对于任何参与汽车维修或改装的人来说，了解气缸盖螺柱（cylinder head stud）的作用和正确处理方法至关重要。无论您是专业机械师还是DIY爱好者，掌握有关这一部件的知识都能显著影响发动机的可靠性和效率。