boiler water hardness

简明释义

锅炉水硬度

英英释义

例句

1.Monitoring boiler water hardness helps in maintaining optimal operating conditions.

监测锅炉水硬度有助于维持最佳操作条件。

2.High boiler water hardness can lead to reduced efficiency in steam generation.

高锅炉水硬度会导致蒸汽生成效率降低。

3.Regular testing of boiler water hardness is essential to prevent scale buildup.

定期测试锅炉水硬度对防止水垢积聚至关重要。

4.The technician adjusted the treatment chemicals to control the boiler water hardness.

技术员调整了处理化学品以控制锅炉水硬度。

5.A boiler water hardness test kit is crucial for any facility using steam boilers.

任何使用蒸汽锅炉的设施都需要一个锅炉水硬度测试工具包。

作文

Understanding the concept of boiler water hardness is crucial for anyone involved in industrial operations or maintenance of heating systems. Boiler water hardness refers to the concentration of dissolved minerals, primarily calcium and magnesium, in the water used in boilers. These minerals can lead to various operational issues if not properly managed. When water with high boiler water hardness is heated, it tends to form scale deposits on the boiler's internal surfaces. This scaling can significantly reduce the efficiency of heat transfer, leading to higher fuel consumption and increased operating costs.In addition to efficiency losses, excessive scaling due to boiler water hardness can also lead to more severe problems such as overheating and eventual failure of the boiler. This is because the scale acts as an insulating layer, preventing effective heat exchange. Consequently, the boiler may overheat, which could potentially result in catastrophic failures. Therefore, monitoring and controlling boiler water hardness is essential for maintaining the integrity and longevity of boiler systems.To manage boiler water hardness, many industries utilize water treatment processes. These processes often involve the use of chemical additives that help to precipitate out the hardness-causing minerals before they can enter the boiler system. Additionally, regular blowdown procedures are implemented to remove concentrated water from the boiler, thereby reducing the overall hardness level. By keeping the boiler water hardness within acceptable limits, companies can ensure that their boilers operate efficiently and safely.Moreover, understanding the boiler water hardness levels can also aid in compliance with industry regulations and standards. Many jurisdictions have specific guidelines regarding water quality in steam generation systems, and failing to adhere to these can result in penalties or even shutdowns. Therefore, regular testing and analysis of boiler water hardness are fundamental practices in many industrial settings.In conclusion, boiler water hardness is a critical factor in the operation and maintenance of boiler systems. Its impact on efficiency, safety, and regulatory compliance underscores the importance of effective water treatment and monitoring practices. By prioritizing the management of boiler water hardness, industries can enhance their operational performance and extend the lifespan of their equipment. Understanding and addressing this issue is not just beneficial; it is essential for the successful operation of any facility that relies on boiler systems for heat and power generation.

理解锅炉水硬度的概念对于任何参与工业操作或锅炉加热系统维护的人来说都是至关重要的。锅炉水硬度是指用于锅炉的水中溶解矿物质（主要是钙和镁）的浓度。如果不加以管理，这些矿物质可能会导致各种操作问题。当含有高锅炉水硬度的水被加热时，它会在锅炉内部表面形成水垢沉积。这种水垢会显著降低热传递效率，从而导致更高的燃料消耗和增加的运营成本。除了效率损失外，过度的水垢由于锅炉水硬度还可能导致更严重的问题，例如过热和最终的锅炉故障。这是因为水垢充当绝缘层，阻碍有效的热交换。因此，锅炉可能会过热，这可能会导致灾难性的故障。因此，监测和控制锅炉水硬度对于保持锅炉系统的完整性和使用寿命至关重要。为了管理锅炉水硬度，许多行业采用水处理工艺。这些工艺通常涉及使用化学添加剂，帮助在矿物质进入锅炉系统之前将其沉淀出来。此外，定期的排污程序也会实施，以去除锅炉中的浓缩水，从而降低整体硬度水平。通过将锅炉水硬度保持在可接受的范围内，公司可以确保其锅炉高效且安全地运行。此外，了解锅炉水硬度水平还可以帮助遵守行业法规和标准。许多管辖区对蒸汽发生系统中的水质有特定的指导方针，未能遵守这些规定可能会导致罚款甚至停工。因此，定期测试和分析锅炉水硬度是许多工业环境中的基本实践。总之，锅炉水硬度是锅炉系统操作和维护中的一个关键因素。它对效率、安全和合规性的影响突显了有效水处理和监测实践的重要性。通过优先管理锅炉水硬度，各行业可以提高其运营性能并延长设备的使用寿命。理解和解决这个问题不仅是有益的；对于任何依赖锅炉系统进行热能和发电的设施来说，它是必不可少的。