contact clearance

简明释义

触点间隙

英英释义

例句

1.The technician performed a thorough check to ensure the contact clearance 接触间隙 was within specifications.

技术员进行了彻底检查，以确保接触间隙在规格范围内。

2.A proper contact clearance 接触间隙 ensures optimal performance in electrical components.

合适的接触间隙确保电气元件的最佳性能。

3.The assembly line requires regular monitoring of contact clearance 接触间隙 to prevent mechanical failures.

生产线需要定期监测接触间隙以防止机械故障。

4.Before starting the engine, it's crucial to verify the contact clearance 接触间隙 of the spark plugs.

在启动引擎之前，检查火花塞的接触间隙至关重要。

5.Engineers need to adjust the contact clearance 接触间隙 during maintenance checks.

工程师在维护检查时需要调整接触间隙。

作文

In the world of aviation and air traffic management, ensuring safety is paramount. One of the critical aspects of maintaining safety in the skies is the concept of contact clearance. This term refers to the authorization given by air traffic control (ATC) for an aircraft to enter a specific airspace or to proceed with a particular maneuver. Understanding contact clearance is essential for pilots, air traffic controllers, and anyone involved in aviation operations. The process of obtaining contact clearance begins when a pilot communicates with ATC before entering a controlled airspace. The pilot must provide relevant information, including their current position, altitude, and intended route. In response, ATC assesses the situation, considering other aircraft in the vicinity and any potential hazards. Once ATC determines that it is safe for the aircraft to proceed, they issue a contact clearance, which may include specific instructions such as altitude changes, heading adjustments, or routing information. The importance of contact clearance cannot be overstated. It serves as a vital communication tool that helps prevent collisions and ensures the smooth flow of air traffic. Without proper contact clearance, the risk of accidents increases significantly, as multiple aircraft may unknowingly enter the same airspace at the same time. Therefore, pilots must understand the implications of contact clearance and adhere strictly to the instructions provided by ATC. Furthermore, contact clearance is not just about safety; it also plays a crucial role in efficiency. By managing the flow of air traffic through clearances, ATC can optimize flight paths, reduce delays, and improve overall operational efficiency. This is particularly important in busy airspaces where multiple flights are constantly taking off and landing. In addition to its operational significance, contact clearance has legal implications as well. Pilots are required by law to obtain clearance before entering controlled airspace, and failure to do so can result in serious consequences, including fines or suspension of flying privileges. Thus, understanding the legal framework surrounding contact clearance is essential for all aviation professionals. Moreover, the advent of technology has further enhanced the process of obtaining contact clearance. With the introduction of advanced communication systems and automation, pilots can receive real-time updates and instructions from ATC more efficiently. This technological advancement not only streamlines the process but also contributes to enhanced safety and situational awareness during flight operations. In conclusion, contact clearance is a fundamental aspect of aviation safety and efficiency. It involves a structured communication process between pilots and air traffic controllers, ensuring that aircraft can operate safely within controlled airspace. By understanding the significance of contact clearance, aviation professionals can contribute to a safer and more efficient air traffic system. As the aviation industry continues to evolve, the principles of contact clearance will remain a cornerstone of effective air traffic management, safeguarding lives and enhancing the overall flying experience.

在航空和空中交通管理的世界中，确保安全至关重要。维护天空安全的关键方面之一是contact clearance的概念。这个术语指的是空中交通管制（ATC）给予飞机进入特定空域或进行特定机动的授权。理解contact clearance对飞行员、空中交通管制员以及任何参与航空操作的人来说都是必不可少的。 获取contact clearance的过程始于飞行员在进入受控空域之前与ATC的沟通。飞行员必须提供相关信息，包括他们的当前位置、高度和预期航线。作为回应，ATC评估情况，考虑周围其他飞机和潜在危险。一旦ATC确定飞机可以继续，他们就会发出contact clearance，这可能包括特定的指令，如高度变化、航向调整或航线信息。 contact clearance的重要性不容小觑。它作为一种重要的沟通工具，帮助防止碰撞，并确保空中交通的顺畅流动。如果没有适当的contact clearance，事故的风险显著增加，因为多架飞机可能在同一时间不知情地进入同一空域。因此，飞行员必须理解contact clearance的含义，并严格遵守ATC提供的指令。 此外，contact clearance不仅关乎安全，还在效率方面发挥着至关重要的作用。通过清晰的许可管理空中交通流量，ATC可以优化飞行路径、减少延误并提高整体运营效率。这在繁忙的空域中特别重要，因为多架航班不断起降。 除了其操作意义外，contact clearance还有法律意义。法律要求飞行员在进入受控空域之前获得许可，而未能做到这一点可能会导致严重后果，包括罚款或吊销飞行执照。因此，理解围绕contact clearance的法律框架对所有航空专业人士都至关重要。 此外，科技的进步进一步提升了获取contact clearance的过程。随着先进通信系统和自动化的引入，飞行员可以更高效地从ATC接收实时更新和指令。这一技术进步不仅简化了流程，还为飞行操作中的安全和情境意识作出了贡献。 总之，contact clearance是航空安全和效率的基本方面。它涉及飞行员与空中交通管制员之间的结构化沟通过程，确保飞机能够安全地在受控空域内运行。通过理解contact clearance的重要性，航空专业人士可以为更安全、更高效的空中交通系统做出贡献。随着航空业的不断发展，contact clearance的原则将继续成为有效空中交通管理的基石，保障生命安全并提升整体飞行体验。