bearing area

简明释义

承力面

英英释义

例句

1.A larger bearing area can reduce the pressure on the ground.

更大的承载面积可以减少地面的压力。

2.Engineers calculated the bearing area to ensure stability under heavy loads.

工程师计算了承载面积以确保在重载下的稳定性。

3.The weight of the machinery is distributed over a large bearing area to prevent damage.

机器的重量分布在一个大的承载面积上，以防止损坏。

4.In construction, the foundation's bearing area is crucial for supporting the structure.

在建筑中，基础的承载面积对于支撑结构至关重要。

5.The design of the bridge must consider the load distribution on the bearing area.

桥梁的设计必须考虑到对承载面积的负载分布。

作文

The concept of the bearing area is crucial in various fields, particularly in engineering and architecture. It refers to the portion of a structure that is responsible for supporting loads. Understanding the bearing area is essential for ensuring the stability and safety of buildings, bridges, and other constructions. When designing a structure, engineers must calculate the appropriate bearing area to distribute the weight evenly, preventing any localized stress that could lead to failure.For instance, consider a large bridge. The bearing area of the bridge's pillars must be sufficient to handle the weight of the bridge itself as well as the vehicles that travel across it. If the bearing area is too small, it could result in excessive pressure on the foundation, leading to cracks or even collapse. This principle applies not only to bridges but also to residential buildings, where the bearing area of walls and foundations must be carefully calculated to support the entire structure.In addition to its importance in construction, the bearing area concept can also be applied in other domains such as biomechanics. For example, in the human body, the bearing area of joints plays a significant role in movement and load-bearing capacity. The knees, hips, and spine must have adequate bearing areas to support the weight of the body during various activities like walking, running, or jumping. If the bearing area of these joints is compromised, it can lead to injuries or chronic pain.Moreover, the bearing area is not static; it can change based on various factors, including material properties, environmental conditions, and usage patterns. Engineers often use advanced materials and techniques to enhance the bearing area of structures. For instance, the use of reinforced concrete can significantly increase the bearing area compared to traditional materials. This innovation allows for lighter and more efficient designs without compromising safety.In conclusion, the bearing area is a fundamental concept that underpins the integrity of various structures and systems. Whether in engineering, architecture, or biomechanics, understanding and optimizing the bearing area is vital for ensuring safety, efficiency, and functionality. As we continue to innovate and push the boundaries of design, the significance of the bearing area will remain an essential consideration in our creations. By prioritizing the bearing area, we can build safer, more resilient structures that stand the test of time.

“承载面积”这个概念在各个领域中都至关重要，特别是在工程和建筑方面。它指的是结构中负责支撑负荷的部分。理解“承载面积”对于确保建筑、桥梁和其他建筑物的稳定性和安全性至关重要。在设计结构时，工程师必须计算适当的“承载面积”，以均匀分配重量，防止任何局部应力导致的故障。例如，考虑一座大型桥梁。桥梁支柱的“承载面积”必须足够大，以承受桥梁本身的重量以及过往车辆的重量。如果“承载面积”过小，可能会导致基础上承受过大的压力，从而导致裂缝甚至倒塌。这一原则不仅适用于桥梁，也适用于住宅建筑，在这些建筑中，墙体和基础的“承载面积”必须经过仔细计算，以支撑整个结构。除了在建筑中的重要性外，“承载面积”概念也可以应用于其他领域，例如生物力学。例如，在人体中，关节的“承载面积”在运动和承重能力中起着重要作用。膝盖、臀部和脊柱必须有足够的“承载面积”，以支持身体在行走、奔跑或跳跃等各种活动中的重量。如果这些关节的“承载面积”受到损害，可能会导致受伤或慢性疼痛。此外，“承载面积”并不是静态的；它会根据各种因素而变化，包括材料特性、环境条件和使用模式。工程师经常使用先进的材料和技术来增强结构的“承载面积”。例如，使用钢筋混凝土可以显著增加“承载面积”，与传统材料相比。这种创新允许设计出更轻便、更高效的结构，而不影响安全性。总之，“承载面积”是支撑各种结构和系统完整性的基本概念。无论是在工程、建筑还是生物力学中，理解和优化“承载面积”对于确保安全性、效率和功能性至关重要。随着我们不断创新并推动设计的边界，“承载面积”的重要性将始终是我们创造中的一个重要考虑因素。通过优先考虑“承载面积”，我们能够建造更安全、更具韧性的结构，能够经受住时间的考验。