bearing anchor

简明释义

轴瓦固定螺钉

英英释义

例句

1.The captain instructed the crew to check the bearing anchor before setting sail.

船长指示船员在起航前检查方位锚。

2.The bearing anchor helps sailors maintain their heading even in turbulent waters.

方位锚帮助水手在波涛汹涌的水域中保持航向。

3.Using a bearing anchor, we were able to navigate through the fog safely.

利用方位锚，我们能够安全地穿越浓雾。

4.In navigation, a bearing anchor is crucial for determining your position relative to landmarks.

在导航中，方位锚对于确定相对于地标的位置至关重要。

5.The ship adjusted its course using the bearing anchor to ensure it stayed on track.

船只利用方位锚调整航向，以确保保持在正确的航线上。

作文

In the world of maritime navigation, the term bearing anchor is crucial for ensuring the stability and safety of a vessel. A bearing anchor refers to a specific type of anchor that is designed to hold a ship in place against the forces of wind and current. Understanding how to use a bearing anchor effectively can mean the difference between a successful voyage and a disastrous one. When a ship reaches its destination, the captain must decide where to drop anchor. This decision is influenced by various factors, including water depth, seabed composition, and weather conditions. Once the appropriate location is identified, the crew prepares to deploy the bearing anchor. The anchor is lowered into the water, and as it sinks, it begins to dig into the seabed. The effectiveness of the anchor depends on its design and weight, as well as the type of seabed it is being set into.One of the key aspects of using a bearing anchor is understanding the concept of holding power. Holding power refers to the anchor's ability to resist the forces acting upon it. Factors such as wind speed and current strength play a significant role in determining whether a bearing anchor will hold firm. For instance, during a storm, the holding power of an anchor becomes even more critical. If the anchor fails to hold, the ship could drift into dangerous waters or collide with other vessels.In addition to the physical properties of the bearing anchor, the skill of the crew also plays a vital role. Proper technique in deploying and setting the anchor can greatly enhance its effectiveness. Crew members need to ensure that the anchor is not only dropped but also allowed to set properly. This may involve letting out enough chain or rope to provide the anchor with a good angle of pull, which helps it dig into the seabed more effectively.Moreover, maintaining an awareness of the vessel's position is essential when using a bearing anchor. Modern technology, such as GPS and sonar, can assist in monitoring the ship's location and the effectiveness of the anchor. However, traditional methods, like observing landmarks or using a compass, can still be valuable, especially in areas where technology may fail.The importance of a bearing anchor extends beyond just keeping a vessel stationary. It also plays a crucial role in the safety of the crew and cargo. A well-set anchor can prevent accidents and protect the integrity of the ship. For example, if a ship is anchored in a busy port, a secure bearing anchor ensures that it does not drift into other vessels or structures, thereby avoiding potential collisions.In conclusion, the concept of a bearing anchor is fundamental to maritime operations. It encompasses not only the physical attributes of the anchor itself but also the skills and knowledge of the crew. Understanding how to effectively use a bearing anchor can lead to safer voyages and greater peace of mind for everyone on board. As we continue to navigate the vast oceans, the principles of anchoring will remain a cornerstone of safe and effective maritime travel.

在海洋导航的世界中，术语bearing anchor对于确保船只的稳定性和安全性至关重要。bearing anchor指的是一种特定类型的锚，它旨在抵御风和潮流的作用，将船只固定在原地。有效理解如何使用bearing anchor可能意味着成功航行和灾难之间的区别。当船只到达目的地时，船长必须决定在哪里抛锚。这个决定受到多种因素的影响，包括水深、海底组成和天气条件。一旦确定了适当的位置，船员就准备部署bearing anchor。锚被放入水中，随着它下沉，它开始深入海底。锚的有效性取决于其设计和重量，以及它所处的海底类型。使用bearing anchor的一个关键方面是理解保持力的概念。保持力指的是锚抵抗外力作用的能力。风速和潮流强度等因素在决定bearing anchor是否能牢固固定方面起着重要作用。例如，在暴风雨中，锚的保持力变得更加关键。如果锚未能固定，船只可能会漂流到危险水域或与其他船只相撞。除了bearing anchor的物理属性外，船员的技能也起着至关重要的作用。正确的抛锚和设置技术可以大大增强其有效性。船员需要确保锚不仅被放下，还要让它正确设置。这可能涉及放出足够的链条或绳索，以便为锚提供良好的拉力角度，这有助于它更有效地深入海底。此外，在使用bearing anchor时，保持对船只位置的意识至关重要。现代技术，如GPS和声纳，可以帮助监测船只的位置和锚的有效性。然而，传统方法，如观察地标或使用指南针，在技术可能失效的区域仍然是有价值的。bearing anchor的重要性不仅限于将船只固定在原地。它还在保护船员和货物的安全方面发挥着至关重要的作用。一个设置良好的锚可以防止事故并保护船只的完整性。例如，如果一艘船在繁忙的港口抛锚，一个稳固的bearing anchor确保它不会漂移到其他船只或结构中，从而避免潜在的碰撞。总之，bearing anchor的概念是海事操作的基础。它不仅包括锚本身的物理特性，还包括船员的技能和知识。理解如何有效使用bearing anchor可以带来更安全的航行和更大的安心。随着我们继续在广阔的海洋中航行，锚定原则将始终是安全有效的海事旅行的基石。