ballast trim

简明释义

压载状态

英英释义

例句

1.The captain adjusted the ballast trim to ensure the ship remained stable during the storm.

船长调整了压舱水 trim以确保船在风暴中保持稳定。

2.The engineer explained how to adjust the ballast trim for different cargo loads.

工程师解释了如何根据不同的货物负载调整压舱水 trim。

3.Monitoring the ballast trim is crucial for maintaining optimal performance in rough seas.

监测压舱水 trim对保持在恶劣海况下的最佳性能至关重要。

4.Before departure, the crew checked the ballast trim to comply with safety regulations.

出发前，船员检查了压舱水 trim以符合安全规定。

5.Improper ballast trim can lead to dangerous conditions, making the vessel prone to capsizing.

不当的压舱水 trim可能导致危险情况，使船只容易翻覆。

作文

Understanding the concept of ballast trim is essential for anyone involved in maritime operations, especially those who work with ships and boats. The term refers to the adjustment of ballast in a vessel to achieve optimal stability and performance on the water. Ballast is weight added to a ship to improve its stability and prevent capsizing. It can be in the form of water, sand, or other heavy materials. The way this ballast is distributed affects the ballast trim, which is essentially the balance of the vessel from bow to stern. A well-managed ballast trim ensures that the ship maintains an even keel, allowing for safer navigation and increased efficiency.When a vessel is loaded, its weight distribution can change significantly. This is where the importance of ballast trim comes into play. If the ballast is not properly adjusted, the ship may sit too low in the water at the bow or stern, leading to poor handling and increased fuel consumption. For instance, if a ship is heavily loaded at the back, it may experience a stern trim, which can cause the bow to rise out of the water. This condition can lead to reduced steering control and increased resistance against waves, ultimately affecting the vessel's speed and fuel efficiency.To achieve the best ballast trim, crew members must continuously monitor the load and make adjustments as necessary. This process often involves transferring water ballast from one tank to another or adding/removing solid ballast. By maintaining the correct ballast trim, a ship can navigate through various sea conditions more effectively, reducing the risk of accidents and ensuring the safety of both the crew and the cargo.Moreover, understanding ballast trim is not only important for safety but also for environmental considerations. Ships that operate with improper trim can generate more wake, leading to increased erosion along coastlines and disturbing marine ecosystems. Therefore, managing ballast trim is crucial for sustainable maritime practices. In conclusion, ballast trim plays a vital role in the maritime industry. It is the key to ensuring that vessels operate safely and efficiently. As such, proper training and awareness of ballast trim principles are essential for all maritime professionals. By mastering this concept, they can contribute to safer seas and more sustainable shipping practices. Whether you are a seasoned sailor or a newcomer to the maritime world, understanding ballast trim will enhance your ability to operate vessels effectively, ensuring smoother voyages and greater respect for our oceans.

理解压舱配重的概念对任何参与海洋作业的人来说都是至关重要的，尤其是那些与船只和小艇打交道的人。这个术语指的是对船舶压舱物的调整，以实现最佳的稳定性和水上性能。压舱物是加在船上的重量，用于改善其稳定性并防止倾覆。它可以是水、沙子或其他重材料。这种压舱物的分配方式会影响压舱配重，这本质上是船舶从船头到船尾的平衡。妥善管理的压舱配重确保船舶保持水平，允许更安全的导航和提高效率。当一艘船装载时，其重量分布可能会发生显著变化。这就是压舱配重重要性的体现。如果压舱物没有正确调整，船舶可能在船头或船尾过低入水，从而导致操控不良和燃料消耗增加。例如，如果一艘船在后面负载过重，可能会出现船尾下沉的情况，这会导致船头抬出水面。这种情况会导致减弱的操控能力和对波浪的阻力增加，最终影响船舶的速度和燃油效率。为了实现最佳的压舱配重，船员必须不断监测负载并根据需要进行调整。这个过程通常涉及将水压舱从一个水箱转移到另一个水箱，或者添加/去除固体压舱物。通过保持正确的压舱配重，船舶可以更有效地穿越各种海洋条件，减少事故风险，并确保船员和货物的安全。此外，理解压舱配重不仅对安全重要，而且对环境考虑也很重要。以不当配重操作的船舶可能会产生更多的尾流，导致沿海岸线的侵蚀加剧，并扰乱海洋生态系统。因此，管理压舱配重对可持续的海洋实践至关重要。总之，压舱配重在海洋行业中扮演着重要角色。它是确保船舶安全高效运行的关键。因此，对所有海洋专业人员来说，适当的培训和对压舱配重原则的认识是必不可少的。通过掌握这一概念，他们可以为更安全的海洋和更可持续的航运实践做出贡献。无论你是经验丰富的水手还是海洋世界的新手，理解压舱配重都将增强你有效操作船舶的能力，确保更顺畅的航行和对我们海洋的更大尊重。