autolean mixture

简明释义

自动贫化燃烧混合物

英英释义

例句

1.Adjusting the autolean mixture can help reduce engine knocking.

调整自稀混合气可以帮助减少发动机敲击声。

2.During the emissions test, the vehicle failed due to an incorrect autolean mixture.

在排放测试中，由于不正确的自稀混合气，车辆未通过测试。

3.The engine's performance improved significantly after adjusting the autolean mixture.

在调整了自稀混合气后，发动机的性能显著提升。

4.A rich fuel mixture can lead to poor combustion, while a proper autolean mixture ensures better efficiency.

富油混合气可能导致燃烧不良，而适当的自稀混合气则能确保更好的效率。

5.To optimize fuel efficiency, mechanics often tweak the autolean mixture settings.

为了优化燃油效率，机械师通常会调整自稀混合气设置。

作文

In the realm of automotive engineering, understanding the concept of an autolean mixture is crucial for optimizing engine performance and efficiency. An autolean mixture refers to a fuel-air mixture that is intentionally made leaner than the stoichiometric ratio, which is the ideal balance of air and fuel that allows for complete combustion. This lean mixture can enhance fuel economy and reduce emissions, making it a desirable characteristic in modern vehicles. When discussing the benefits of an autolean mixture, one cannot overlook its impact on fuel efficiency. By reducing the amount of fuel in the combustion process while maintaining an adequate supply of air, engines can operate more efficiently. This efficiency not only leads to better mileage but also contributes to lower carbon dioxide emissions, which is increasingly important in today's environmentally conscious society. The implementation of an autolean mixture can significantly decrease the carbon footprint of a vehicle, aligning with global efforts to combat climate change.However, achieving the right balance in an autolean mixture is a delicate task. Too lean of a mixture can lead to incomplete combustion, resulting in higher levels of nitrogen oxides (NOx) and other harmful emissions. Therefore, automotive engineers must carefully calibrate the air-fuel ratios to ensure that while the mixture remains lean, it does not compromise the overall performance and emissions standards of the vehicle. Advanced technologies such as electronic fuel injection systems and oxygen sensors are often employed to monitor and adjust the autolean mixture in real-time, allowing for optimal engine performance under varying driving conditions.Moreover, the use of an autolean mixture is not limited to conventional gasoline engines. It is also applicable in diesel engines, where a lean burn strategy can be utilized to improve efficiency. Diesel engines can benefit from a lean mixture because they inherently have higher compression ratios, which allows for more efficient combustion of the leaner fuel-air mixture. This adaptability demonstrates the versatility of the autlean mixture concept across different types of internal combustion engines.In conclusion, the autlean mixture plays a pivotal role in enhancing engine efficiency and reducing emissions in modern vehicles. As the automotive industry moves towards more sustainable practices, understanding and implementing lean mixtures will be essential. Engineers and manufacturers must continue to innovate and refine their approaches to ensure that these mixtures can be optimized for performance without sacrificing environmental standards. Ultimately, the successful application of an autlean mixture represents a significant step forward in the quest for cleaner, more efficient transportation solutions.

在汽车工程领域，理解“autlean mixture”的概念对于优化发动机性能和效率至关重要。“autlean mixture”指的是一种故意比化学计量比更稀的燃料-空气混合物，这种混合物允许完全燃烧的理想空气与燃料的平衡。这种稀混合物可以提高燃油经济性并减少排放，使其成为现代车辆中一种可取的特性。讨论“autlean mixture”的好处时，人们无法忽视其对燃油效率的影响。通过在燃烧过程中减少燃料的量，同时保持足够的空气供应，发动机可以更高效地运行。这种效率不仅能带来更好的里程，还能降低二氧化碳排放，这在当今环保意识日益增强的社会中显得尤为重要。实施“autlean mixture”可以显著减少车辆的碳足迹，与全球应对气候变化的努力相一致。然而，实现“autlean mixture”的正确平衡是一项微妙的任务。过于稀薄的混合物会导致燃烧不完全，从而导致氮氧化物（NOx）和其他有害排放物的增加。因此，汽车工程师必须仔细校准空气-燃料比，以确保在混合物保持稀薄的同时，不妨碍车辆的整体性能和排放标准。先进的技术，如电子燃油喷射系统和氧传感器，通常被用来实时监控和调整“autlean mixture”，以便在不同驾驶条件下实现最佳的发动机性能。此外，“autlean mixture”的使用不限于传统的汽油发动机。在柴油发动机中，也可以利用稀燃策略来提高效率。柴油发动机可以从稀混合物中受益，因为它们固有的高压缩比使得更稀的燃料-空气混合物能够更有效地燃烧。这种适应性展示了“autlean mixture”概念在不同类型内燃机中的多样性。总之，“autlean mixture”在提升现代车辆发动机效率和减少排放方面发挥着关键作用。随着汽车行业向更可持续的实践迈进，理解和实施稀混合物将是必不可少的。工程师和制造商必须继续创新和完善他们的方法，以确保这些混合物能够在不牺牲环境标准的情况下得到优化。最终，“autlean mixture”的成功应用代表了在追求更清洁、更高效的交通解决方案道路上的重要一步。