blade height

简明释义

叶高

英英释义

例句

1.For best results, set the blade height to 3 inches for your first mowing of the season.

为了获得最佳效果，季节首次割草时将刀片高度设置为3英寸。

2.Check the blade height settings on your trimmer to avoid scalping the lawn.

检查修剪机上的刀片高度设置，以避免削平草坪。

3.A lower blade height is recommended for a cleaner finish on your garden beds.

对于花坛，建议使用较低的刀片高度以获得更干净的效果。

4.The blade height can affect the quality of the cut on your grass.

在草坪上的切割质量可能会受到刀片高度的影响。

5.Make sure to adjust the blade height before starting the lawn mower.

在启动割草机之前，请确保调整刀片高度。

作文

In the world of engineering and design, precision is key to achieving optimal performance. One term that often comes up in discussions about machinery and tools is blade height. This term refers to the vertical measurement of the blade from its base to its cutting edge. Understanding blade height is crucial for various applications, including woodworking, metalworking, and even culinary arts. By mastering this concept, professionals can enhance their work quality and efficiency.Firstly, let’s explore why blade height matters in woodworking. When using saws, such as table saws or band saws, the blade height determines how deep the cut will be. A higher blade height allows for deeper cuts, which is essential when working with thick materials. Conversely, setting the blade height too high can lead to dangerous situations, such as kickback, where the material unexpectedly shoots back towards the operator. Therefore, adjusting the blade height to match the thickness of the wood is vital for safety and precision.In metalworking, the significance of blade height cannot be overstated. Different metals require different cutting techniques, and the blade height must be adjusted accordingly. For instance, when using a shear, the blade height should be set to ensure that the blade effectively slices through the metal without causing burrs or uneven edges. A well-calibrated blade height not only improves the quality of the cut but also prolongs the life of the cutting tool.Moreover, in the culinary world, chefs must also pay attention to blade height when using knives. The height of the blade affects how food is sliced and diced. A taller blade can provide more leverage, making it easier to cut through denser foods, while a shorter blade offers more control for intricate tasks. Understanding the implications of blade height can significantly impact the presentation and texture of the final dish.To sum up, blade height is a fundamental aspect of various trades that rely on cutting tools. Whether in woodworking, metalworking, or cooking, the ability to adjust and understand blade height plays a critical role in achieving desired outcomes. It enhances both safety and efficiency, allowing professionals to perform their tasks with confidence. As one continues to learn and develop skills in these areas, mastering the concept of blade height becomes an invaluable asset that contributes to overall craftsmanship and expertise.

在工程和设计的世界中，精确性是实现最佳性能的关键。一个常常在讨论机械和工具时出现的术语是刀片高度。这个术语指的是刀片从其基座到切削边缘的垂直测量。理解刀片高度对木工、金属加工甚至烹饪艺术等各种应用至关重要。通过掌握这一概念，专业人士可以提升工作质量和效率。首先，让我们探讨一下刀片高度在木工中的重要性。当使用锯子，如台锯或带锯时，刀片高度决定了切割的深度。较高的刀片高度允许更深的切割，这在处理厚材料时至关重要。相反，将刀片高度设定得过高可能会导致危险情况，例如回弹，即材料意外地向操作员射回。因此，调整刀片高度以匹配木材的厚度对于安全和精确至关重要。在金属加工中，刀片高度的重要性不容小觑。不同的金属需要不同的切割技术，刀片高度必须相应调整。例如，在使用剪切机时，刀片高度应该设置为确保刀片有效地切割金属，而不会造成毛刺或不均匀的边缘。良好校准的刀片高度不仅提高了切割质量，还延长了切割工具的使用寿命。此外，在烹饪界，厨师在使用刀具时也必须关注刀片高度。刀片的高度会影响食物的切割和切丁。较高的刀片可以提供更多的杠杆，使切割更密实的食物变得更加容易，而较短的刀片则在进行复杂任务时提供更多的控制。理解刀片高度的影响可以显著影响最终菜肴的呈现和质感。总之，刀片高度是依赖切割工具的各种行业的基本方面。无论是在木工、金属加工还是烹饪中，能够调整和理解刀片高度在实现理想结果中发挥着关键作用。它提高了安全性和效率，使专业人士能够自信地执行他们的任务。随着一个人继续学习和发展这些领域的技能，掌握刀片高度的概念成为一种无价的资产，有助于整体工艺和专业知识。