bilge ejector

简明释义

舱底水抽除器

英英释义

例句

1.A malfunctioning bilge ejector can lead to serious flooding in the engine room.

故障的污水排放器可能导致机舱严重进水。

2.The captain instructed the crew to check the bilge ejector before setting sail.

船长指示船员在起航前检查污水排放器。

3.During the drill, we practiced how to operate the bilge ejector in case of an emergency.

在演习中，我们练习了在紧急情况下如何操作污水排放器。

4.The ship's maintenance crew inspected the bilge ejector to ensure it was functioning properly.

船舶的维护团队检查了污水排放器以确保其正常运作。

5.After the heavy rain, we had to activate the bilge ejector to remove excess water from the hull.

在大雨过后，我们不得不启动污水排放器以清除船体内的多余水分。

作文

The maritime industry is filled with specialized terminology that can often be confusing to those unfamiliar with the field. One such term is bilge ejector, which refers to a device used in ships to remove bilge water. Bilge water is the accumulated water that collects in the lowest part of a ship's hull, known as the bilge. This water can contain various contaminants, including oil, dirt, and other debris, making its removal essential for the safety and efficiency of the vessel. The bilge ejector plays a crucial role in maintaining the ship's stability and preventing any potential environmental hazards. Understanding how a bilge ejector works is vital for anyone involved in ship maintenance or operation. Typically, the system utilizes the principle of suction to draw out the bilge water. It often employs a pump, which creates a vacuum that pulls the water through a series of pipes and into a holding tank or directly overboard, depending on regulations and the specific design of the ship. The effectiveness of a bilge ejector can significantly impact a vessel's performance, as excess water can lead to increased weight and instability, potentially causing dangerous situations at sea.In addition to technical knowledge, it is also important to understand the environmental implications of using a bilge ejector. Many countries have strict regulations regarding the discharge of bilge water to prevent pollution of the oceans. Therefore, operators must ensure that their bilge ejector systems are compliant with these laws, often requiring the installation of additional filtration systems to clean the water before it is released back into the sea. This highlights the importance of proper training and awareness among crew members about the functioning and legal requirements related to bilge ejectors.Moreover, regular maintenance of the bilge ejector is essential to ensure its reliability. Neglecting this aspect can lead to malfunctions, which may result in the accumulation of bilge water and, consequently, operational issues. Crew members should be trained to perform routine checks and maintenance tasks, such as inspecting the pumps, cleaning filters, and ensuring that all components are in good working order. By doing so, they can help prevent costly repairs and ensure the safety of the vessel and its crew.In conclusion, the term bilge ejector encompasses more than just a piece of equipment; it represents a critical component of ship operations that directly affects safety, environmental responsibility, and overall vessel performance. Understanding its function, maintenance needs, and regulatory requirements is essential for anyone involved in maritime activities. As the industry continues to evolve with advancements in technology and stricter environmental standards, the role of the bilge ejector will undoubtedly remain significant, emphasizing the need for ongoing education and adaptation within the field.

海事行业充满了专业术语，对于那些不熟悉该领域的人来说，这些术语往往令人困惑。其中一个术语是bilge ejector，指的是一种用于船只排除舱底水的装置。舱底水是指在船体最低部分（称为舱底）积聚的水。这种水可能含有各种污染物，包括油、污垢和其他杂物，因此其排除对船只的安全性和效率至关重要。bilge ejector在维护船只稳定性和防止潜在环境危害方面发挥着关键作用。理解bilge ejector的工作原理对于任何参与船只维护或操作的人来说都是至关重要的。通常，该系统利用吸力原理来抽取舱底水。它通常使用泵，产生真空，将水通过一系列管道抽入储存罐或直接排出到海洋中，具体取决于法规和船只的设计。bilge ejector的有效性可以显著影响船只的性能，因为过多的水会导致重量增加和不稳定，从而可能在海上造成危险情况。除了技术知识，了解使用bilge ejector的环境影响也很重要。许多国家对舱底水的排放有严格的规定，以防止海洋污染。因此，操作员必须确保他们的bilge ejector系统符合这些法律，通常需要安装额外的过滤系统以清洁水质，然后再将其释放回海洋。这突显了船员在bilge ejectors的功能和法律要求方面进行适当培训和意识的重要性。此外，定期维护bilge ejector对于确保其可靠性至关重要。忽视这一方面可能导致故障，从而导致舱底水的积聚，并因此产生操作问题。船员应接受培训，执行常规检查和维护任务，例如检查泵、清洁过滤器以及确保所有组件处于良好工作状态。通过这样做，他们可以帮助防止昂贵的维修并确保船只及其船员的安全。总之，术语bilge ejector不仅仅代表一件设备；它代表了船舶操作的一个关键组成部分，直接影响安全性、环境责任和整体船只性能。理解其功能、维护需求和法规要求对任何参与海事活动的人来说都是必不可少的。随着行业随着技术进步和环境标准的日益严格而不断发展，bilge ejector的角色无疑将保持重要性，强调了该领域持续教育和适应的必要性。