anchor chain meter

简明释义

锚链拉力表

英英释义

例句

1.The ship's captain ordered the crew to measure the anchor chain meter 锚链米数 before anchoring.

船长命令船员在抛锚前测量锚链米数。

2.During the inspection, they found that the anchor chain meter 锚链米 was worn out and needed replacement.

在检查过程中，他们发现锚链米磨损严重，需要更换。

3.To calculate the total length of the anchor chain meters 锚链米, we must add up each section.

要计算总的锚链米长度，我们必须将每个部分加起来。

4.We need at least 30 anchor chain meters 锚链米 to ensure the vessel stays secure in this location.

我们需要至少30锚链米来确保船只在这个位置安全。

5.Each anchor chain meter 锚链米 adds significant weight to the vessel, affecting its stability.

每个锚链米都会给船只增加显著的重量，影响其稳定性。

作文

Understanding the term anchor chain meter is crucial for those involved in maritime activities, particularly in anchoring ships and vessels. The anchor chain meter refers to the measurement of the length of the anchor chain that is deployed into the water when a ship is anchored. This measurement is vital because it directly affects the holding power of the anchor and the safety of the vessel. When a ship drops anchor, the length of the chain that is let out must be appropriate for the depth of the water and the type of seabed. A general rule of thumb is to deploy at least five to seven times the depth of the water in anchor chain meters. For example, if the water is 10 meters deep, the chain should ideally be 50 to 70 meters long. This ensures that the anchor has enough scope to hold the vessel securely against wind and current forces. The anchor chain meter is also important in terms of the material and weight of the chain itself. A heavier chain will provide better holding power, while a lighter chain may not hold as well in rough conditions. Additionally, the chain's construction and condition can affect its performance; for instance, a worn or damaged chain could lead to failure and potential loss of the vessel. In modern shipping, technology plays a significant role in managing anchor chain meters. Many vessels are now equipped with sophisticated anchoring systems that can automatically calculate the required length of chain based on real-time data about water depth, weather conditions, and the vessel's size. This technological advancement helps to enhance safety and efficiency in anchoring operations. Moreover, understanding the implications of anchor chain meters extends beyond just the physical aspects of anchoring. It also involves knowledge of maritime regulations and best practices. Mariners must be aware of local regulations regarding anchoring zones, which may dictate how much chain should be used and where anchoring is permitted. In conclusion, the term anchor chain meter encapsulates an essential aspect of maritime navigation and safety. Whether you are a seasoned mariner or a novice sailor, comprehending the significance of anchor chain meters can greatly impact your experience at sea. Properly managing the length of the anchor chain not only ensures the safety of the vessel but also contributes to the overall efficiency of maritime operations. As the maritime industry continues to evolve, staying informed about such critical measurements will remain vital for all seafarers.

理解术语anchor chain meter对从事海事活动的人来说至关重要，特别是在锚泊船只和船舶时。anchor chain meter指的是在船只抛锚时放入水中的锚链长度的测量。这一测量至关重要，因为它直接影响锚的保持力和船舶的安全性。当船只抛锚时，放出的链条长度必须适合水的深度和海床类型。一般经验法则是，至少要放出水深的五到七倍的链条作为anchor chain meter。例如，如果水深为10米，则链条理想情况下应为50到70米长。这确保了锚有足够的范围来牢固地固定船只，以抵御风和潮流的力量。anchor chain meter在锚链的材料和重量方面也很重要。较重的链条将提供更好的保持力，而较轻的链条在恶劣条件下可能无法保持。此外，链条的结构和状况也会影响其性能；例如，磨损或损坏的链条可能导致失效和潜在的船只损失。在现代航运中，技术在管理anchor chain meters方面发挥了重要作用。许多船只现在配备了复杂的锚泊系统，可以根据水深、天气条件和船只大小的实时数据自动计算所需的链条长度。这一技术进步有助于提高锚泊操作的安全性和效率。此外，理解anchor chain meters的含义不仅仅涉及锚泊的物理方面。它还涉及对海事法规和最佳实践的知识。海员必须了解有关锚泊区域的地方规章，这可能规定了应使用多少链条以及在哪里允许锚泊。总之，术语anchor chain meter概括了海事导航和安全的一个重要方面。无论您是经验丰富的海员还是新手水手，理解anchor chain meters的重要性都能极大地影响您在海上的体验。妥善管理锚链的长度不仅确保了船只的安全，还促进了海事操作的整体效率。随着海事行业的不断发展，了解这些关键测量将继续对所有海员至关重要。