air tight joint

简明释义

气密接头

英英释义

例句

1.In order to maintain the vacuum, the scientists ensured that every air tight joint 气密接头 was properly sealed.

为了保持真空，科学家们确保每个气密接头都已正确密封。

2.The engineer emphasized the importance of an air tight joint 气密接头 in the plumbing system to prevent water loss.

工程师强调了在管道系统中制作气密接头的重要性，以防止水损失。

3.To ensure the container is leak-proof, we need to create an air tight joint 气密接头 between the lid and the body.

为了确保容器不漏水，我们需要在盖子和主体之间制作一个气密接头。

4.The packaging was designed with an air tight joint 气密接头 to keep the food fresh for longer.

该包装采用了气密接头设计，以保持食品的新鲜度更长时间。

5.During the installation of the HVAC system, we must check for any air tight joint 气密接头 failures to ensure efficiency.

在安装HVAC系统时，我们必须检查是否有任何气密接头故障，以确保效率。

作文

In the world of engineering and construction, the term air tight joint refers to a connection between two materials that prevents the passage of air. This concept is crucial in various applications, including buildings, vehicles, and machinery, as it helps maintain energy efficiency and ensures safety. An air tight joint not only enhances the structural integrity of a product but also contributes to the overall performance by minimizing unwanted air leaks.Consider a typical residential building. Proper insulation is essential for maintaining a comfortable indoor environment. When builders create an air tight joint between windows and walls, they effectively reduce drafts and heat loss. This means that homeowners can enjoy a stable temperature without relying excessively on heating or cooling systems, leading to lower energy bills. Furthermore, an air tight joint helps prevent moisture infiltration, which can cause mold growth and damage to the building's structure over time.In the automotive industry, the importance of an air tight joint cannot be overstated. Cars are designed to be aerodynamic, and any gaps that allow air to escape can negatively impact fuel efficiency. Engineers pay close attention to the seals around doors, windows, and engine compartments to ensure that they are perfectly sealed. This not only improves the vehicle's performance but also reduces noise levels inside the cabin, providing a more pleasant driving experience.Moreover, in the realm of manufacturing, creating an air tight joint is vital for products such as refrigerators and HVAC systems. These devices rely on sealed connections to maintain internal pressure and optimize their cooling capabilities. A failure in any of these joints could lead to a significant drop in efficiency, higher operational costs, and ultimately, product failure. Therefore, manufacturers invest in advanced technologies and materials to achieve the best possible air tight joint in their designs.The significance of an air tight joint extends beyond just physical structures; it also plays a role in environmental sustainability. By reducing air leaks, we can lower energy consumption, which directly impacts our carbon footprint. For instance, buildings with well-sealed joints consume less energy, contributing to a decrease in greenhouse gas emissions. This aligns with global efforts to combat climate change and promote sustainable practices in various industries.In conclusion, the concept of an air tight joint is integral to modern engineering and construction. From homes to vehicles and appliances, the ability to create effective seals has far-reaching implications for energy efficiency, safety, and environmental sustainability. As technology continues to advance, the methods for achieving air tight joints will likely evolve, leading to even better performance and durability in various applications. Understanding this term not only enhances our knowledge of engineering principles but also emphasizes the importance of precision and quality in creating products that meet the demands of today’s world.

在工程和建筑的世界中，术语air tight joint指的是两个材料之间的连接，能防止空气通过。这个概念在建筑、车辆和机械等各种应用中至关重要，因为它有助于维持能效并确保安全。一个air tight joint不仅增强了产品的结构完整性，还通过最小化不必要的空气泄漏来提高整体性能。以典型的住宅建筑为例。适当的隔热对于维持舒适的室内环境至关重要。当建筑商在窗户和墙壁之间创建air tight joint时，他们有效地减少了气流和热量损失。这意味着房主可以享受稳定的温度，而无需过度依赖供暖或制冷系统，从而降低能源费用。此外，air tight joint有助于防止湿气渗入，这可能会导致霉菌生长和建筑结构的损坏。在汽车行业，air tight joint的重要性不容小觑。汽车设计为具有空气动力学特性，任何允许空气逃逸的缝隙都可能对燃油效率产生负面影响。工程师密切关注门窗和发动机舱周围的密封，以确保它们完美密封。这不仅提高了车辆的性能，还降低了驾驶舱内的噪音水平，提供更愉快的驾驶体验。此外，在制造领域，创建air tight joint对于冰箱和HVAC系统等产品至关重要。这些设备依赖于密封连接来维持内部压力并优化其制冷能力。任何这些接头的故障都可能导致效率显著下降，运营成本上升，最终导致产品失败。因此，制造商投资于先进的技术和材料，以实现其设计中最佳的air tight joint。air tight joint的重要性超越了物理结构；它还在环境可持续性中发挥作用。通过减少空气泄漏，我们可以降低能源消耗，这直接影响我们的碳足迹。例如，具有良好密封接头的建筑消耗更少的能源，从而有助于减少温室气体排放。这与全球应对气候变化和促进各行业可持续实践的努力相一致。总之，air tight joint的概念在现代工程和建筑中是不可或缺的。从住宅到车辆和电器，创造有效密封的能力对能效、安全和环境可持续性具有深远的影响。随着技术的不断进步，实现air tight joint的方法可能会不断演变，从而在各种应用中实现更好的性能和耐用性。理解这个术语不仅增强了我们对工程原理的认识，还强调了在创造满足当今世界需求的产品时精确和质量的重要性。