maximum allowable emission

简明释义

最大容许发散

英英释义

例句

1.Regular monitoring is essential to ensure that the maximum allowable emission levels are not exceeded.

定期监测对于确保不超过最大允许排放水平至关重要。

2.Violating the maximum allowable emission can lead to hefty fines and legal consequences.

违反最大允许排放可能导致高额罚款和法律后果。

3.The new regulations have tightened the maximum allowable emission standards for industrial plants.

新规定已加强了工业厂房的最大允许排放标准。

4.The factory must adhere to the maximum allowable emission limits set by the environmental agency.

工厂必须遵守环保机构设定的最大允许排放限制。

5.We need to implement new technologies to reduce our maximum allowable emission footprint.

我们需要实施新技术来减少我们的最大允许排放足迹。

作文

In recent years, the issue of environmental pollution has gained significant attention worldwide. As industries expand and urban areas grow, the impact on our planet becomes more pronounced. One crucial concept in addressing this issue is the maximum allowable emission, which refers to the highest level of pollutants that can be legally emitted into the environment by a specific source. This regulation is vital for protecting air quality and public health. When we talk about maximum allowable emission, we are essentially discussing the limits set by government agencies to control the amount of harmful substances released into the atmosphere.The significance of maximum allowable emission lies in its role in regulating industrial activities. Factories and power plants are often the largest contributors to air pollution, releasing various harmful gases such as sulfur dioxide, nitrogen oxides, and particulate matter. By establishing a maximum allowable emission limit, authorities can ensure that these facilities operate within safe boundaries, thereby minimizing their environmental footprint. For instance, if a coal-fired power plant exceeds its maximum allowable emission limit for sulfur dioxide, it may be required to implement additional pollution control technologies or face penalties.Furthermore, the concept of maximum allowable emission is not static; it evolves based on scientific research and technological advancements. As we learn more about the adverse effects of certain pollutants, regulatory bodies may adjust these limits to better protect the environment and public health. For example, stricter regulations on carbon emissions have emerged due to the growing concern over climate change. The maximum allowable emission for carbon dioxide from vehicles has been tightened significantly in many countries, pushing manufacturers to develop cleaner technologies.Public awareness and advocacy also play a crucial role in enforcing maximum allowable emission standards. Citizens are becoming increasingly informed about the health impacts of pollution, leading to greater demand for accountability from industries. Environmental organizations often monitor emissions and lobby for stricter regulations, highlighting the importance of compliance with maximum allowable emission limits. This grassroots movement has resulted in numerous success stories where communities have successfully pressured local governments to enforce stricter emission standards.Moreover, the economic implications of maximum allowable emission regulations cannot be overlooked. While some argue that imposing strict limits may hinder industrial growth, others contend that it can drive innovation. Companies are often incentivized to invest in cleaner technologies and more efficient processes to meet these regulations. In this way, maximum allowable emission limits can lead to the development of new markets and job opportunities in the green technology sector.In conclusion, the concept of maximum allowable emission is critical in our fight against environmental degradation. It serves as a benchmark for controlling pollution, protecting public health, and promoting sustainable industrial practices. As we continue to face environmental challenges, the importance of adhering to maximum allowable emission standards will only grow. Through collective efforts from governments, industries, and individuals, we can work towards a cleaner, healthier future for our planet.

近年来，环境污染问题在全球范围内引起了广泛关注。随着工业的发展和城市地区的扩张，对我们星球的影响变得愈加明显。解决这一问题的一个关键概念是最大允许排放量，它指的是特定来源可以合法排放到环境中的污染物的最高水平。这项规定对于保护空气质量和公众健康至关重要。当我们谈论最大允许排放量时，我们实际上是在讨论政府机构设定的限制，以控制有害物质释放到大气中的数量。最大允许排放量的重要性在于其在监管工业活动中的作用。工厂和发电厂通常是空气污染的最大贡献者，释放出多种有害气体，如二氧化硫、氮氧化物和颗粒物。通过建立最大允许排放量限制，当局可以确保这些设施在安全范围内运行，从而最小化其对环境的影响。例如，如果一家燃煤发电厂超过了其二氧化硫的最大允许排放量，则可能需要实施额外的污染控制技术或面临处罚。此外，最大允许排放量的概念并不是静态的；它会根据科学研究和技术进步而不断演变。随着我们对某些污染物不良影响的了解加深，监管机构可能会调整这些限制，以更好地保护环境和公众健康。例如，由于对气候变化日益关注，对碳排放的更严格法规已经出现。许多国家对汽车的最大允许排放量进行了显著收紧，迫使制造商开发更清洁的技术。公众意识和倡导在执行最大允许排放量标准中也起着至关重要的作用。公民们对污染对健康的影响越来越了解，从而对工业的问责制提出了更大的要求。环保组织经常监测排放，并游说更严格的法规，强调遵守最大允许排放量限制的重要性。这一草根运动催生了许多成功案例，社区成功施压地方政府实施更严格的排放标准。此外，最大允许排放量法规的经济影响也不容忽视。虽然一些人认为实施严格限制可能会妨碍工业增长，但另一些人则认为这可以推动创新。公司通常会被激励投资于更清洁的技术和更高效的流程，以满足这些法规。因此，最大允许排放量限制可以促成新市场和绿色技术部门的就业机会的发展。总之，最大允许排放量的概念在我们对抗环境恶化的斗争中至关重要。它作为控制污染、保护公众健康和促进可持续工业实践的基准。随着我们继续面对环境挑战，遵守最大允许排放量标准的重要性只会增加。通过政府、工业和个人的共同努力，我们可以为我们的星球创造一个更清洁、更健康的未来。