knocked down frame

简明释义

可拆卸的门框

英英释义

例句

1.The construction team had to rebuild the entire structure after the strong winds caused the knocked down frame 倒塌的框架.

施工队在强风导致倒塌的框架后不得不重建整个结构。

2.The knocked down frame 倒塌的框架 of the old barn was a reminder of the harsh winters that had taken their toll.

老谷仓的倒塌的框架提醒着人们那些对其造成伤害的严酷冬季。

3.During the storm, we saw several houses with a knocked down frame 倒塌的框架 that needed urgent repairs.

在暴风雨期间，我们看到几栋房屋有倒塌的框架，需要紧急修理。

4.The artist decided to incorporate the knocked down frame 倒塌的框架 into her next sculpture as a statement about fragility.

这位艺术家决定将倒塌的框架融入她的下一个雕塑，以表达脆弱的主题。

5.After the accident, the car was left with a knocked down frame 倒塌的框架 that made it unsafe to drive.

事故发生后，汽车留下了一个倒塌的框架，使其驾驶不安全。

作文

In the world of construction and design, the term knocked down frame refers to a structural component that has been disassembled or designed to be easily taken apart. This concept is particularly important in modular construction, where efficiency and flexibility are key. A knocked down frame allows for easier transportation and storage, as it can be shipped in a more compact form. This not only saves space but also reduces costs associated with shipping and handling.The advantages of using a knocked down frame in building projects cannot be overstated. Firstly, it facilitates quick assembly on-site, which can significantly reduce labor costs and project timelines. Workers can efficiently put together the frame without needing specialized tools or equipment. This is especially beneficial in remote locations where access to resources may be limited.Moreover, the use of a knocked down frame promotes sustainability. By minimizing waste during transportation and allowing for reuse of materials, this approach aligns well with modern eco-friendly practices. For instance, when a building needs to be relocated or modified, a knocked down frame can be easily disassembled and reassembled in a new configuration, thus extending its lifecycle and reducing the need for new materials.However, there are challenges associated with knocked down frames. One significant concern is the structural integrity of the connections once the frame is reassembled. It is crucial that the design accounts for the potential wear and tear that comes with repeated assembly and disassembly. Engineers must ensure that the joints and connections remain strong and stable over time.Additionally, while the initial cost savings can be appealing, the long-term benefits of a knocked down frame depend on careful planning and execution. Builders must consider factors such as the durability of the materials used and the overall design of the structure. If not properly managed, the advantages of a knocked down frame could be outweighed by the costs of maintenance and repairs.In conclusion, the concept of a knocked down frame plays a crucial role in modern construction practices. Its ability to facilitate easy transport, promote sustainability, and allow for quick assembly presents numerous benefits. However, careful consideration must be given to its design and execution to ensure that it meets the necessary standards of safety and durability. As the construction industry continues to evolve, the importance of innovative solutions like the knocked down frame will only grow, paving the way for more efficient and sustainable building practices in the future.

在建筑和设计的世界中，术语knocked down frame指的是一个结构组件，它已经被拆解或被设计为易于拆卸。这个概念在模块化建筑中尤为重要，因为效率和灵活性是关键。knocked down frame允许更容易的运输和存储，因为它可以以更紧凑的形式运输。这不仅节省了空间，还减少了与运输和处理相关的成本。在建筑项目中使用knocked down frame的优势不容小觑。首先，它促进了现场的快速组装，这可以显著降低人工成本和项目时间表。工人可以高效地组装框架，而无需专业工具或设备。这在资源可能有限的偏远地区尤其有利。此外，使用knocked down frame促进了可持续性。通过最小化运输过程中的浪费并允许材料的再利用，这种方法与现代环保实践相一致。例如，当一栋建筑需要搬迁或修改时，knocked down frame可以轻松拆卸并重新组装成新的配置，从而延长其生命周期并减少对新材料的需求。然而，与knocked down frame相关的挑战也存在。一个显著的问题是重新组装后连接的结构完整性。设计时必须考虑到随着反复组装和拆卸而可能出现的磨损和撕裂。工程师必须确保接头和连接在长时间内保持强度和稳定性。此外，尽管初始的成本节约可能很吸引人，但knocked down frame的长期益处取决于仔细的规划和执行。建筑商必须考虑所用材料的耐用性和结构的整体设计。如果管理不当，knocked down frame的优势可能会被维护和修理的成本所抵消。总之，knocked down frame的概念在现代建筑实践中发挥着至关重要的作用。它能够促进便捷的运输、促进可持续性并允许快速组装，带来了许多好处。然而，必须仔细考虑其设计和执行，以确保其符合必要的安全和耐用性标准。随着建筑行业的不断发展，像knocked down frame这样的创新解决方案的重要性只会增加，为未来更高效和可持续的建筑实践铺平道路。