grouted joint

简明释义

灌浆接缝

英英释义

例句

1.After the installation, the grouted joint needs to cure for at least 24 hours.

安装后，灌浆接缝需要固化至少24小时。

2.Regular maintenance of the grouted joint can extend the lifespan of the pavement.

定期维护灌浆接缝可以延长路面的使用寿命。

3.The contractor ensured that each grouted joint was filled properly to prevent water leakage.

承包商确保每个灌浆接缝都填充得当，以防止水漏。

4.Inspecting the grouted joint regularly helps identify potential cracks early.

定期检查灌浆接缝有助于及早发现潜在裂缝。

5.The architect specified a flexible material for the grouted joint to accommodate movement.

建筑师指定了一种柔性材料用于灌浆接缝以适应位移。

作文

In the world of construction and architecture, the term grouted joint refers to a specific method of joining two or more materials together using grout. Grout is a fluid form of concrete that is used to fill gaps, seal joints, and provide a strong bond between surfaces. The use of grouted joints is particularly common in tiling, masonry, and stonework, where it plays a crucial role in ensuring structural integrity and aesthetic appeal.The process of creating a grouted joint begins with the careful preparation of the surfaces to be joined. This involves cleaning and leveling the surfaces to ensure that the grout adheres properly. Once the surfaces are ready, the grout is mixed according to the manufacturer's specifications. It is essential to achieve the right consistency; too thick, and it won’t flow into the joints, while too thin may not provide adequate strength.After mixing, the grout is applied to the joints using a trowel or a grout float. The applicator must ensure that the grouted joint is filled completely, without any air pockets or voids, which could compromise the joint's strength. Once the grout is applied, it is important to wipe away any excess from the surface of the tiles or stones to ensure a clean finish.One of the significant advantages of using grouted joints is that they can accommodate slight movements in the materials being joined, which is especially important in environments subject to temperature fluctuations or seismic activity. The flexibility of the grout allows for some degree of expansion and contraction, reducing the risk of cracking or separation over time.Additionally, grouted joints enhance the overall appearance of tiled surfaces. The grout can be tinted or colored to complement the tiles, providing a cohesive look. Properly grouted joints can create sharp lines and defined edges, contributing to the visual appeal of the installation.However, maintaining grouted joints is also crucial. Over time, grout can become discolored or damaged due to moisture, mold, or wear and tear. Regular cleaning and resealing can help preserve the integrity and appearance of the grout. In cases where the grout has deteriorated significantly, re-grouting may be necessary to restore the joint’s function and aesthetics.In conclusion, the use of grouted joints is an essential aspect of modern construction and design. They provide not only a practical solution for joining materials but also contribute to the beauty and longevity of architectural projects. Understanding the importance of grout and its application can lead to better construction practices and ultimately more durable and visually appealing structures.

在建筑和建筑领域，术语grouted joint指的是一种特定的连接两种或多种材料的方法，使用灌浆。灌浆是一种流体形式的混凝土，用于填充缝隙、密封接头并提供表面之间的强大粘合。grouted joints的使用在瓷砖、砌体和石材工作中尤为常见，它在确保结构完整性和美观方面发挥着至关重要的作用。创建grouted joint的过程始于对要连接的表面的仔细准备。这涉及清洁和找平表面，以确保灌浆能够很好地粘附。一旦表面准备就绪，就根据制造商的规格混合灌浆。达到正确的一致性是至关重要的；如果太厚，灌浆将无法流入接缝，而如果太稀，则可能无法提供足够的强度。混合后，使用抹子或灌浆浮子将灌浆施加到接缝上。施加者必须确保grouted joint完全填充，没有任何气泡或空隙，这可能会影响接头的强度。一旦施加了灌浆，重要的是要擦去任何多余的灌浆，以确保瓷砖或石材表面整洁。使用grouted joints的一个显著优势是它们可以容纳被连接材料的轻微运动，这在温度波动或地震活动频繁的环境中尤为重要。灌浆的灵活性允许一定程度的膨胀和收缩，从而减少随时间推移而出现裂缝或分离的风险。此外，grouted joints增强了瓷砖表面的整体外观。灌浆可以着色或调色以补充瓷砖，提供统一的外观。正确的灌浆接头可以创建清晰的线条和定义的边缘，增强安装的视觉吸引力。然而，维护grouted joints也是至关重要的。随着时间的推移，由于潮湿、霉菌或磨损，灌浆可能会变色或损坏。定期清洁和重新密封可以帮助保持灌浆的完整性和外观。在灌浆严重恶化的情况下，可能需要重新灌浆以恢复接头的功能和美观。总之，使用grouted joints是现代建筑和设计的重要方面。它们不仅提供了一种实用的连接材料的解决方案，还为建筑项目的美观和耐久性做出了贡献。理解灌浆及其应用的重要性可以带来更好的建筑实践，并最终创造出更耐用和视觉吸引力更强的结构。