formwork tie

简明释义

模板拉杆

英英释义

例句

1.The construction crew installed the formwork tie to secure the concrete forms in place.

施工队安装了模板拉杆以固定混凝土模板。

2.Before pouring the concrete, check that each formwork tie is properly tightened.

在浇筑混凝土之前，检查每个模板拉杆是否正确拧紧。

3.The engineer specified the type of formwork tie to be used for this project.

工程师指定了本项目中要使用的模板拉杆类型。

4.After removing the forms, the formwork tie can be cut and discarded.

拆除模板后，可以剪断并丢弃模板拉杆。

5.Using a sturdy formwork tie is essential to prevent the walls from bowing during the pour.

使用坚固的模板拉杆对于防止浇筑过程中墙体变形至关重要。

作文

In the construction industry, the term formwork tie refers to a crucial component used in the process of creating concrete structures. A formwork tie is essentially a device that holds the formwork in place while the concrete is poured and sets. Formwork itself is a temporary or permanent mold into which concrete is poured to achieve the desired shape of the structure. Without proper support and stabilization, the formwork could collapse under the weight of the wet concrete, leading to structural failures and safety hazards.The importance of formwork ties cannot be overstated. They are designed to withstand the pressure exerted by the liquid concrete, which can be quite significant. When concrete is poured into the formwork, it exerts a lateral pressure that can reach up to several hundred pounds per square foot, depending on the type of concrete and the height of the pour. Therefore, a well-designed formwork tie system is essential for ensuring the integrity and safety of the construction process.There are various types of formwork ties, each suited for different applications and materials. For instance, some ties are made of steel, while others may be made from plastic or wood. The choice of material often depends on factors such as the size of the formwork, the type of concrete being used, and the environmental conditions of the construction site. In addition, formwork ties can be adjustable, allowing for flexibility in the width of the formwork, which is particularly useful when dealing with varying dimensions of concrete elements.Moreover, the installation of formwork ties requires careful planning and execution. Workers must ensure that the ties are placed at the correct intervals and secured properly to avoid any movement during the pouring process. This task demands not only technical knowledge but also practical skills, as improper installation can lead to catastrophic results. Therefore, training and experience are vital for personnel involved in this aspect of construction.Another important consideration is the removal of formwork ties after the concrete has cured. Depending on the type of tie used, some may need to be removed entirely, while others can remain embedded within the concrete. The decision on whether to leave ties in place often depends on structural requirements and aesthetic considerations. For example, if the ties are left in place, they can sometimes contribute to the overall strength of the concrete structure, but they may also affect the appearance of the finished product.In conclusion, formwork ties play an indispensable role in the construction of concrete structures. They provide the necessary support to formwork during the concrete pouring process, ensuring safety and structural integrity. Understanding the function and importance of formwork ties is essential for anyone involved in construction, from engineers to laborers. As the construction industry continues to evolve, innovations in formwork tie technology will likely emerge, further enhancing the efficiency and safety of building practices worldwide.

在建筑行业中，术语formwork tie指的是在创建混凝土结构过程中使用的重要组成部分。formwork tie基本上是一种装置，用于在浇筑混凝土和固化的过程中保持模板到位。模板本身是一个临时或永久的模具，混凝土被倒入其中以实现所需的结构形状。如果没有适当的支撑和稳定，模板可能会在湿混凝土的重量下坍塌，导致结构失败和安全隐患。formwork ties的重要性不容小觑。它们旨在承受液态混凝土施加的压力，这可能相当显著。当混凝土倒入模板中时，它会施加侧向压力，这个压力可以达到每平方英尺数百磅，具体取决于混凝土的类型和浇筑的高度。因此，一个设计良好的formwork tie系统对于确保施工过程的完整性和安全性至关重要。有各种类型的formwork ties，每种类型适用于不同的应用和材料。例如，一些绑带由钢制成，而另一些可能由塑料或木材制成。材料的选择通常取决于诸如模板的大小、所用混凝土的类型以及施工现场的环境条件等因素。此外，formwork ties可以调节，允许在模板宽度上的灵活性，这在处理不同尺寸的混凝土元素时尤为有用。此外，安装formwork ties需要仔细的计划和执行。工人必须确保绑带以正确的间隔放置并牢固固定，以避免在浇筑过程中发生任何移动。这项任务不仅需要技术知识，还需要实践技能，因为不当安装可能导致灾难性的结果。因此，参与这一施工环节的人员的培训和经验至关重要。另一个重要考虑因素是在混凝土固化后移除formwork ties。根据所使用的绑带类型，有些可能需要完全移除，而另一些可以嵌入混凝土中。是否留住绑带的决定通常取决于结构要求和美学考虑。例如，如果绑带留在适当的位置，它们有时可以增强混凝土结构的整体强度，但也可能影响成品的外观。总之，formwork ties在混凝土结构的施工中发挥着不可或缺的作用。它们在混凝土浇筑过程中为模板提供必要的支持，确保安全和结构完整性。理解formwork ties的功能和重要性对任何参与建筑的人来说都是至关重要的，从工程师到工人。随着建筑行业的不断发展，formwork tie技术的创新可能会出现，进一步提高全球建筑实践的效率和安全性。