angle of torsion

简明释义

扭转角

英英释义

例句

1.The angle of torsion 扭转角 can affect the performance of a rotating shaft in machinery.

在机器中的旋转轴中，扭转角 angle of torsion 会影响其性能。

2.When designing bridges, the angle of torsion 扭转角 must be taken into account to prevent structural failure.

在设计桥梁时，必须考虑扭转角 angle of torsion 以防止结构失效。

3.The angle of torsion 扭转角 in the cable can determine how much load it can support.

电缆中的扭转角 angle of torsion 可以决定它能承受多少负载。

4.Engineers must calculate the angle of torsion 扭转角 to ensure the safety of structural components.

工程师必须计算扭转角 angle of torsion 以确保结构组件的安全性。

5.In mechanical engineering, the angle of torsion 扭转角 is crucial for analyzing the strength of materials under twisting forces.

在机械工程中，扭转角 angle of torsion 对于分析材料在扭曲力下的强度至关重要。

作文

The concept of the angle of torsion refers to the measure of the amount of twist that an object experiences when subjected to a torque. This phenomenon is critical in various fields, including engineering, physics, and material science, where understanding the behavior of materials under stress is essential. The angle of torsion is particularly relevant in the analysis of beams, shafts, and other structural components that are expected to endure twisting forces during their operational life.When a force is applied to a structure, it can cause deformation in the form of bending, stretching, or twisting. The angle of torsion quantifies the degree to which an object has been twisted from its original position. For example, if a cylindrical shaft is twisted, the angle between the original position of one end of the shaft and its new position after the application of torque can be defined as the angle of torsion. This measurement is crucial for engineers when designing components that must withstand specific loads without failing.To better understand the significance of the angle of torsion, consider the example of a metal rod used in construction. If the rod is subjected to a twisting force, the resulting angle of torsion can lead to internal stresses that might exceed the material's yield strength. If this occurs, the rod may experience permanent deformation or even fracture. Therefore, it is vital for engineers to calculate the maximum allowable angle of torsion for materials they are working with to ensure safety and structural integrity.In addition to its applications in engineering, the angle of torsion also plays a role in mechanical systems, such as automotive and aerospace components. For instance, drive shafts in vehicles are designed to transmit power while minimizing the angle of torsion to prevent excessive wear and tear. Engineers must carefully analyze the angle of torsion to ensure that these components can handle the stresses imposed during operation without failure.Furthermore, the angle of torsion is not only a static measurement but can also be dynamic. In certain applications, such as rotating machinery, the angle of torsion can change over time due to varying loads and speeds. Thus, monitoring the angle of torsion in real-time becomes essential for predictive maintenance and avoiding catastrophic failures.In conclusion, the angle of torsion is a fundamental concept that plays a crucial role in the design and analysis of various structures and mechanical systems. Understanding how to measure and control the angle of torsion enables engineers to create safer and more efficient designs. As technology continues to advance, the importance of accurately assessing the angle of torsion will only increase, making it a vital area of study for future engineers and scientists. Therefore, mastering the principles surrounding the angle of torsion is essential for anyone involved in the fields of engineering and materials science.

扭转角的概念指的是物体在受到扭矩时所经历的扭曲量的度量。这种现象在工程、物理和材料科学等多个领域中至关重要，在这些领域中，理解材料在应力下的行为是必不可少的。扭转角在分析梁、轴和其他结构组件时尤其相关，这些组件在其操作生命周期中预期会承受扭转力。当施加力量于结构时，它可能导致弯曲、拉伸或扭曲等变形。扭转角量化了物体从其原始位置被扭曲的程度。例如，如果一个圆柱形轴被扭转，则轴的一端的原始位置与施加扭矩后其新位置之间的角度可以定义为扭转角。这个测量对于工程师在设计必须承受特定负荷而不发生故障的组件时至关重要。为了更好地理解扭转角的重要性，可以考虑一个用于建筑的金属杆的例子。如果杆受到扭转力，导致的扭转角可能会导致内部应力超过材料的屈服强度。如果发生这种情况，杆可能会经历永久变形甚至断裂。因此，对于工程师来说，计算他们所使用材料的最大允许扭转角至关重要，以确保安全和结构完整性。除了在工程中的应用外，扭转角在机械系统中也起着作用，例如汽车和航空航天组件。例如，车辆中的传动轴被设计为在最小化扭转角的同时传递动力，以防止过度磨损。工程师必须仔细分析扭转角，以确保这些组件能够承受操作期间施加的应力而不发生故障。此外，扭转角不仅是静态测量，也可以是动态的。在某些应用中，例如旋转机械，扭转角可能会随着时间的推移而变化，原因是负载和速度的变化。因此，实时监测扭转角对于预测性维护和避免灾难性故障变得至关重要。总之，扭转角是一个基本概念，在各种结构和机械系统的设计和分析中发挥着至关重要的作用。理解如何测量和控制扭转角使工程师能够创造出更安全、更高效的设计。随着技术的不断进步，准确评估扭转角的重要性只会增加，使其成为未来工程师和科学家的重要研究领域。因此，掌握围绕扭转角的原理对于任何参与工程和材料科学领域的人来说都是至关重要的。