operating temperature range

简明释义

工茁度范围

英英释义

例句

1.If the environment exceeds the operating temperature range, it could damage the components.

如果环境超过工作温度范围，可能会损坏组件。

2.The operating temperature range for this sensor is -40°C to 85°C.

该传感器的工作温度范围为-40°C至85°C。

3.The device must operate within its operating temperature range to ensure optimal performance.

该设备必须在其工作温度范围内运行，以确保最佳性能。

4.Before installing the equipment, check the operating temperature range specified by the manufacturer.

在安装设备之前，请检查制造商指定的工作温度范围。

5.Ensure that the server room maintains a stable operating temperature range to prevent overheating.

确保服务器室保持稳定的工作温度范围以防止过热。

作文

The concept of an operating temperature range is crucial in various fields, particularly in engineering and technology. It refers to the range of temperatures within which a device or system can function optimally without experiencing failure or degradation. Understanding this range is essential for designing reliable equipment that can withstand environmental conditions. For instance, electronic components such as microprocessors have specific operating temperature ranges that must be adhered to in order to ensure their longevity and performance. If these components are exposed to temperatures outside their specified range, they may overheat or become damaged, leading to system failures. In the automotive industry, the operating temperature range of engine components is critical for maintaining efficiency and safety. Engine oils, for example, are formulated to perform best within a certain temperature range. If the engine operates outside this range, it can lead to increased wear and tear, reduced fuel efficiency, and ultimately, engine failure. Thus, manufacturers meticulously test their products to determine the appropriate operating temperature range to ensure optimal performance under various conditions.Moreover, in the field of materials science, understanding the operating temperature range is vital when selecting materials for specific applications. Different materials respond differently to temperature changes; some may become brittle at low temperatures, while others may lose strength at high temperatures. For example, metals like aluminum have a higher thermal conductivity and can withstand higher temperatures compared to plastics, which may deform or melt when exposed to heat. Therefore, engineers must consider the operating temperature range of materials when designing structures or components that will be exposed to varying thermal conditions.In the realm of consumer electronics, the operating temperature range is a key specification provided by manufacturers. Devices such as smartphones and laptops are often used in diverse environments, from hot summer days to cold winter nights. If these devices operate outside their specified temperature range, users may experience issues such as battery drain, screen malfunction, or even complete shutdown. This is why manufacturers include guidelines regarding the operating temperature range in their product manuals, advising users on how to care for their devices to avoid potential damage.In conclusion, the operating temperature range is a fundamental aspect of design and functionality across various industries. It defines the limits within which systems and components can operate effectively. By adhering to these specifications, engineers and manufacturers can enhance the reliability and durability of their products, ultimately leading to better performance and customer satisfaction. As technology continues to advance, understanding and optimizing the operating temperature range will remain a critical factor in the development of innovative solutions that meet the demands of modern life.

“工作温度范围”的概念在各个领域中至关重要，特别是在工程和技术领域。它指的是设备或系统在不发生故障或退化的情况下可以最佳运行的温度范围。理解这个范围对于设计能够承受环境条件的可靠设备至关重要。例如，电子组件如微处理器具有特定的“工作温度范围”，必须遵守以确保其使用寿命和性能。如果这些组件暴露在超出其规定范围的温度下，它们可能会过热或损坏，从而导致系统故障。在汽车工业中，发动机组件的“工作温度范围”对于保持效率和安全至关重要。发动机油例如，配方是为了在特定温度范围内表现最佳。如果发动机在这个范围之外运行，可能会导致磨损增加、燃油效率降低，最终导致发动机故障。因此，制造商会仔细测试他们的产品，以确定适当的“工作温度范围”，以确保在各种条件下的最佳性能。此外，在材料科学领域，了解“工作温度范围”在选择特定应用的材料时至关重要。不同材料对温度变化的反应不同；有些材料在低温下可能变脆，而另一些材料在高温下可能失去强度。例如，铝等金属具有较高的热导率，可以承受比塑料更高的温度，而塑料在暴露于热量时可能会变形或熔化。因此，工程师在设计将暴露于不同热条件的结构或组件时，必须考虑材料的“工作温度范围”。在消费电子领域，“工作温度范围”是制造商提供的关键规格。智能手机和笔记本电脑等设备通常在多种环境中使用，从炎热的夏季到寒冷的冬季。如果这些设备在超出其指定温度范围的情况下运行，用户可能会遇到电池耗尽、屏幕故障甚至完全关闭等问题。这就是为什么制造商在其产品手册中包含有关“工作温度范围”的指南，建议用户如何保养设备以避免潜在损害。总之，“工作温度范围”是各个行业设计和功能的基本方面。它定义了系统和组件可以有效运行的限制。通过遵循这些规格，工程师和制造商可以增强其产品的可靠性和耐用性，从而提高性能和客户满意度。随着技术的不断进步，理解和优化“工作温度范围”将在开发满足现代生活需求的创新解决方案中继续发挥关键作用。