mask tolerance

简明释义

掩模容许偏差

英英释义

Mask tolerance refers to the degree to which a mask can accommodate variations in size, shape, or alignment during manufacturing or application processes without compromising its effectiveness.

面具容忍度是指在制造或应用过程中,面具能够容纳尺寸、形状或对齐的变化而不影响其有效性的程度。

例句

1.The new printing technology boasts excellent mask tolerance, allowing for clearer images.

新印刷技术具有优异的掩模容忍度,可以产生更清晰的图像。

2.Manufacturers should test their products for mask tolerance before launching them into the market.

制造商在将产品投放市场之前,应测试其掩模容忍度

3.The software was updated to improve its mask tolerance when processing images.

软件已更新,以提高其在处理图像时的掩模容忍度

4.In the laboratory, we need to ensure that our equipment has a high mask tolerance for accurate results.

在实验室,我们需要确保我们的设备具有高掩模容忍度以获得准确的结果。

5.When designing the circuit, the engineer considered the mask tolerance to prevent any potential failures.

在设计电路时,工程师考虑了掩模容忍度以防止潜在的故障。

作文

In recent years, the concept of mask tolerance has emerged as a significant topic of discussion, particularly in the context of public health and social behavior. Mask tolerance refers to the degree to which individuals are willing to accept and adhere to the use of masks in various settings, especially during health crises such as the COVID-19 pandemic. This phenomenon is not just about the physical act of wearing a mask; it encompasses a broader spectrum of societal attitudes, beliefs, and behaviors surrounding public health measures.As we navigated through the pandemic, the necessity of wearing masks became evident. Health authorities around the world recommended masks as a primary means of reducing virus transmission. However, the response from the public varied significantly. Some embraced the idea wholeheartedly, while others resisted it vehemently. This divergence in behavior highlights the importance of understanding mask tolerance.Several factors influence mask tolerance. Firstly, personal beliefs and values play a crucial role. Individuals who prioritize community health and safety are more likely to exhibit high levels of mask tolerance, viewing masks as a collective responsibility. Conversely, those who prioritize personal freedom may perceive mask mandates as an infringement on their rights, leading to lower mask tolerance.Secondly, the influence of social norms cannot be underestimated. In communities where wearing masks is seen as a common practice, individuals are more likely to conform to this behavior. The presence of supportive peers, family, and leaders can enhance mask tolerance, fostering an environment where wearing masks is normalized. On the other hand, in areas where mask-wearing is stigmatized or ridiculed, individuals may feel less inclined to wear them, reflecting a low level of mask tolerance.Moreover, the effectiveness of communication from health authorities significantly impacts mask tolerance. Clear, consistent messaging about the benefits of wearing masks can enhance public compliance. When people understand the science behind mask-wearing and its role in protecting themselves and others, they are more likely to develop a positive attitude towards it. Conversely, mixed messages or misinformation can lead to confusion and skepticism, ultimately reducing mask tolerance.The psychological aspect of mask tolerance also warrants attention. For many, wearing a mask can evoke feelings of discomfort or anxiety. Some individuals may associate masks with fear or illness, which can hinder their willingness to wear them. Addressing these psychological barriers through education and empathy is essential in increasing mask tolerance within communities.In conclusion, mask tolerance is a multifaceted concept that reflects individual, social, and psychological dimensions of public health behavior. As we continue to face health challenges, fostering a culture of high mask tolerance will be crucial in ensuring the well-being of our communities. By promoting understanding, empathy, and clear communication, we can encourage individuals to embrace mask-wearing as a vital tool in protecting public health. Ultimately, enhancing mask tolerance will not only help us navigate current health crises but also prepare us for future challenges that may arise.

近年来,‘口罩容忍度’这一概念逐渐成为一个重要的讨论话题,尤其是在公共卫生和社会行为的背景下。口罩容忍度指的是个体在各种环境中愿意接受和遵守佩戴口罩的程度,特别是在COVID-19疫情等健康危机期间。这个现象不仅仅是关于佩戴口罩的物理行为,它还涵盖了围绕公共卫生措施的社会态度、信念和行为的更广泛范围。随着我们应对疫情,佩戴口罩的必要性变得显而易见。世界各地的卫生当局推荐口罩作为减少病毒传播的主要手段。然而,公众的反应却大相径庭。有些人全心全意地接受了这一想法,而另一些人则强烈抵制。这种行为的分歧突显了理解口罩容忍度的重要性。影响口罩容忍度的因素有很多。首先,个人的信念和价值观起着至关重要的作用。那些重视社区健康和安全的人更可能表现出较高的口罩容忍度,将口罩视为一种集体责任。相反,那些重视个人自由的人可能会将口罩令视为对其权利的侵犯,从而导致较低的口罩容忍度。其次,社会规范的影响不可小觑。在那些佩戴口罩被视为普遍做法的社区中,个体更可能顺应这一行为。支持性同伴、家庭和领导者的存在可以增强口罩容忍度,营造出一种佩戴口罩的正常化环境。另一方面,在那些佩戴口罩受到污名化或嘲笑的地区,个体可能会感到不太愿意佩戴口罩,反映出较低的口罩容忍度。此外,卫生当局的沟通效果对口罩容忍度也有显著影响。关于佩戴口罩益处的清晰、一致的信息能够增强公众的遵从性。当人们了解佩戴口罩的科学原理及其在保护自己和他人方面的作用时,他们更可能对其产生积极态度。相反,混乱的信息或错误信息可能导致困惑和怀疑,最终降低口罩容忍度。心理方面的口罩容忍度也值得关注。对于许多人来说,佩戴口罩可能会引发不适或焦虑感。一些个体可能将口罩与恐惧或疾病联系在一起,这可能阻碍他们的佩戴意愿。通过教育和共情来解决这些心理障碍,对于提高社区内的口罩容忍度至关重要。总之,口罩容忍度是一个多面的概念,反映了公共卫生行为的个体、社会和心理维度。随着我们继续面临健康挑战,培养高口罩容忍度的文化对于确保我们社区的健康至关重要。通过促进理解、共情和清晰的沟通,我们可以鼓励个体将佩戴口罩视为保护公共健康的重要工具。最终,提高口罩容忍度不仅将帮助我们应对当前的健康危机,还将为未来可能出现的挑战做好准备。

相关单词

mask

mask详解:怎么读、什么意思、用法

tolerance

tolerance详解:怎么读、什么意思、用法