absorbed power

简明释义

吸收功率

英英释义

例句

1.The absorbed power can vary significantly depending on the load conditions.

根据负载条件，吸收功率可能会有显著变化。

2.The motor's efficiency can be calculated by measuring the absorbed power and comparing it to the output power.

通过测量吸收功率并与输出功率进行比较，可以计算电机的效率。

3.The absorbed power of the device is crucial for understanding its energy consumption.

设备的吸收功率对于理解其能耗至关重要。

4.In this experiment, we need to record the absorbed power of the heating element to determine its performance.

在这个实验中，我们需要记录加热元件的吸收功率以确定其性能。

5.To optimize the system, we must minimize the absorbed power while maintaining functionality.

为了优化系统，我们必须在保持功能的同时最小化吸收功率。

作文

In the world of electrical engineering, the term absorbed power refers to the amount of power that is taken in by a device or system from an external source. This concept is crucial for understanding how various electrical devices operate and interact with each other. Essentially, when a device is connected to a power source, it consumes a certain amount of energy to perform its intended function. The absorbed power can be measured in watts (W) and is essential for calculating the efficiency of the device. For instance, consider an electric motor that is used in a manufacturing plant. When this motor is powered on, it draws electrical energy from the grid. The amount of energy it draws is considered its absorbed power. If the motor is rated at 1000 W, it means that under normal operating conditions, it will consume 1000 watts of electrical power to function effectively. Understanding the absorbed power of such devices allows engineers to design systems that are not only efficient but also capable of handling the required loads without overheating or failing. Moreover, the concept of absorbed power extends beyond just motors. It applies to all sorts of electrical appliances, from household items like refrigerators and air conditioners to industrial machines. Each of these devices has a specific rating for absorbed power, which indicates how much power they require to operate. For example, a typical refrigerator might have an absorbed power rating of around 200 W, meaning it requires that amount of power to maintain its cooling function. The significance of knowing the absorbed power goes beyond just operational efficiency; it also plays a vital role in energy management and sustainability. By understanding the absorbed power of various devices, consumers and businesses can make informed decisions about their energy usage. This knowledge can lead to more efficient energy consumption practices, ultimately reducing electricity bills and contributing to environmental sustainability. Furthermore, in the context of renewable energy sources, the absorbed power becomes even more critical. As we shift towards solar panels and wind turbines, understanding how much power these systems absorb and convert into usable energy is essential for maximizing their efficiency. For example, a solar panel may have a peak absorbed power rating of 300 W under optimal sunlight conditions. Knowing this helps in determining how many panels are needed to meet the energy demands of a household or facility. In conclusion, the concept of absorbed power is fundamental in the field of electrical engineering and energy management. It encompasses the power consumed by various devices and systems, influencing their efficiency and effectiveness. By grasping the importance of absorbed power, individuals and organizations can optimize their energy use, enhance performance, and contribute to a more sustainable future. Understanding this term is not just beneficial for engineers but for anyone looking to improve their energy literacy in today’s increasingly energy-conscious world.

在电气工程领域，术语吸收功率指的是设备或系统从外部源吸收的功率。这个概念对于理解各种电气设备如何运作以及彼此之间的相互作用至关重要。基本上，当一个设备连接到电源时，它会消耗一定量的能量来执行其预定功能。吸收功率可以用瓦特（W）来测量，对于计算设备的效率是必不可少的。例如，考虑在制造厂中使用的电动机。当这个电动机开启时，它从电网中抽取电能。它所抽取的能量被视为其吸收功率。如果电动机的额定功率为1000 W，这意味着在正常工作条件下，它将消耗1000瓦特的电力以有效运作。理解这样的设备的吸收功率使工程师能够设计出不仅高效而且能够处理所需负载的系统，而不会过热或故障。此外，吸收功率的概念不仅限于电动机。它适用于各种电气设备，从家用物品如冰箱和空调到工业机器。这些设备每个都有特定的吸收功率额定值，指示它们运行所需的功率。例如，一台典型的冰箱可能具有约200 W的吸收功率额定值，这意味着它需要该功率来维持其制冷功能。了解吸收功率的重要性超越了操作效率；它在能源管理和可持续性方面也发挥着重要作用。通过了解各种设备的吸收功率，消费者和企业可以做出明智的能源使用决策。这种知识可以导致更高效的能源消费实践，最终降低电费并有助于环境可持续性。此外，在可再生能源的背景下，吸收功率变得更加关键。随着我们转向太阳能电池板和风力涡轮机，理解这些系统吸收并转化为可用能量的能力对于最大化其效率至关重要。例如，太阳能电池板在最佳阳光条件下可能具有300 W的峰值吸收功率额定值。了解这一点有助于确定满足家庭或设施能源需求所需的面板数量。总之，吸收功率的概念在电气工程和能源管理领域中是基础性的。它涵盖了各种设备和系统消耗的功率，影响其效率和效果。通过掌握吸收功率的重要性，个人和组织可以优化其能源使用，提高性能，并为更可持续的未来做出贡献。理解这个术语不仅对工程师有益，而且对任何希望在当今越来越关注能源的世界中提高其能源素养的人都有帮助。