climbing speed

简明释义

爬升速度

英英释义

例句

1.During the ascent, the climbing speed 爬升速度 of the hot air balloon was surprisingly steady.

在上升过程中，热气球的爬升速度 爬升速度出奇地稳定。

2.The pilot reported that the aircraft's climbing speed 爬升速度 was optimal for the altitude gain.

飞行员报告称，飞机的爬升速度 爬升速度对海拔增高是最佳的。

3.The mountain guide advised us to maintain a slow climbing speed 爬升速度 to avoid exhaustion.

登山向导建议我们保持缓慢的爬升速度 爬升速度以避免疲劳。

4.The drone's climbing speed 爬升速度 is crucial for capturing aerial footage quickly.

无人机的爬升速度 爬升速度对于快速捕捉空中画面至关重要。

5.In rock climbing competitions, athletes are judged on their climbing speed 爬升速度 and technique.

在攀岩比赛中，运动员的爬升速度 爬升速度和技术会被评估。

作文

When discussing the performance of an aircraft, one of the critical factors to consider is its climbing speed. The term climbing speed refers to the rate at which an aircraft gains altitude. This is a crucial aspect of aviation, as it directly impacts an aircraft's ability to ascend quickly and efficiently after takeoff or during a climb to cruising altitude. Understanding climbing speed is essential for pilots, engineers, and aviation enthusiasts alike. The climbing speed can vary significantly depending on various factors such as the aircraft's weight, engine power, and atmospheric conditions. For instance, a fully loaded aircraft may have a different climbing speed compared to when it is flying with a lighter load. Additionally, the altitude at which the aircraft is operating plays a vital role; as altitude increases, the air becomes thinner, which can affect engine performance and, consequently, the climbing speed. For pilots, knowing the optimal climbing speed is vital for ensuring a safe and efficient ascent. During the initial climb phase after takeoff, pilots often refer to the aircraft's performance charts to determine the best climbing speed for their specific flight conditions. This information helps them maintain a safe margin above stall speed while maximizing the rate of climb. In addition to safety, the climbing speed also affects fuel efficiency. A higher climbing speed may lead to increased fuel consumption, while a lower speed can prolong the climb, potentially affecting overall flight time. Therefore, pilots must strike a balance between achieving the desired altitude quickly and conserving fuel. Moreover, the climbing speed is not only relevant during takeoff but also during in-flight maneuvers. For example, if an aircraft encounters turbulence or needs to avoid an obstacle, maintaining an appropriate climbing speed is crucial for maneuverability and safety. In conclusion, the concept of climbing speed is fundamental in aviation. It encompasses various factors that influence an aircraft's performance during ascents. For pilots, understanding and optimizing climbing speed is essential for ensuring safety, efficiency, and effective flight operations. As technology advances and aircraft designs evolve, the importance of mastering climbing speed will continue to be a key focus in aviation training and operations. Overall, the significance of climbing speed extends beyond just technical specifications; it embodies the principles of aerodynamics, safety, and operational efficiency in the aviation industry.

在讨论飞机性能时，一个关键因素是其爬升速度。术语爬升速度指的是飞机获得高度的速率。这是航空的一个重要方面，因为它直接影响飞机在起飞后或爬升到巡航高度时的快速有效上升能力。理解爬升速度对飞行员、工程师和航空爱好者来说都是至关重要的。爬升速度可能因多种因素而显著变化，例如飞机的重量、发动机功率和气象条件。例如，满载的飞机与轻载飞行时的爬升速度可能不同。此外，飞机所处的高度也起着重要作用；随着高度增加，空气变得稀薄，这会影响发动机性能，从而影响爬升速度。对于飞行员来说，了解最佳的爬升速度对于确保安全和高效的上升至关重要。在起飞后的初始爬升阶段，飞行员通常参考飞机性能图表，以确定在特定飞行条件下的最佳爬升速度。这些信息帮助他们在保持安全的失速速度之上，同时最大化爬升率。除了安全外，爬升速度还影响燃油效率。较高的爬升速度可能导致燃油消耗增加，而较低的速度可能延长爬升时间，可能影响整体飞行时间。因此，飞行员必须在快速达到所需高度和节省燃油之间找到平衡。此外，爬升速度在起飞期间不仅相关，而且在飞行中的机动操作中也很重要。例如，如果飞机遇到湍流或需要避开障碍物，保持适当的爬升速度对机动性和安全性至关重要。总之，爬升速度的概念在航空中是基础性的。它涵盖了影响飞机在上升期间性能的各种因素。对于飞行员来说，理解和优化爬升速度对确保安全、高效和有效的飞行操作至关重要。随着技术的进步和飞机设计的发展，掌握爬升速度的重要性将继续成为航空培训和操作的关键焦点。总体而言，爬升速度的重要性不仅限于技术规格；它体现了航空工业中空气动力学、安全性和操作效率的原则。