unclamp

简明释义

英[ʌnˈklæmp]美[ʌnˈklæmp]

vt. 松开……的夹钳

英英释义

单词用法

同义词

反义词

例句

1.Join, must both hands hold pipes and pipe fittings tight, keep enough cooling time, cool back hand can unclamp to certain extent, continue and install the next pipe.

连接完毕，必须双手紧握管材和管件，保持足够的冷却时间，冷却到一定程度后手方可松开，继续安装下一段管材。

2.Join, must both hands hold pipes and pipe fittings tight, keep enough cooling time, cool back hand can unclamp to certain extent, continue and install the next pipe.

连接完毕，必须双手紧握管材和管件，保持足够的冷却时间，冷却到一定程度后手方可松开，继续安装下一段管材。

3.Unclamp. One time a serie of ten is much less work than 10 times a single!

一时间，意甲的10要少得多的工作超过10倍，一个单一的！

4.To adjust the height of the table, first unclamp 解开夹具 the screws on the legs.

要调整桌子的高度，首先需要unclamp 解开夹具腿部的螺丝。

5.Make sure to unclamp 解开夹具 the device before performing maintenance.

在进行维护之前，请确保unclamp 解开夹具设备。

6.Before you can remove the pipe, you need to unclamp 解开夹具 it from the wall.

在你可以拆除管道之前，你需要将其从墙上unclamp 解开夹具。

7.After finishing the assembly, don't forget to unclamp 解开夹具 the frame for final adjustments.

组装完成后，不要忘记unclamp 解开夹具框架以进行最终调整。

8.In order to free the wheel, you must unclamp 解开夹具 it from the axle.

为了释放轮子，你必须将其从轴上unclamp 解开夹具。

作文

In the realm of engineering and mechanics, the term unclamp refers to the action of releasing or removing a clamp that holds two or more objects together. This action is crucial in various processes, such as assembly, maintenance, and repair work. Understanding how to properly unclamp an object can significantly impact the efficiency and safety of a project. For instance, consider a scenario where a technician needs to replace a part in a machine. The first step often involves securely clamping the components together to ensure stability during operation. However, when it comes time for maintenance, the technician must carefully unclamp those parts to access the internal mechanisms. The process of unclamping requires attention to detail and a clear understanding of the tools involved. If done hastily, it could lead to misalignment or even damage to the components. Therefore, technicians are trained to follow specific procedures when they need to unclamp machinery. They might use a wrench or a specialized tool designed for this purpose, ensuring that they apply the right amount of force without overexerting themselves. Moreover, unclamping is not limited to mechanical applications; it can also be metaphorically applied to various situations in life. For example, when we talk about freeing ourselves from constraints, we might say that we need to unclamp our minds from limiting beliefs or societal pressures. In this sense, unclamping represents the act of liberating oneself from anything that hinders personal growth or creativity. In everyday life, we encounter numerous situations where we need to unclamp ourselves from negative thoughts or toxic relationships. Just like in mechanical applications, where one must be careful while unclamping to avoid damage, we must approach these personal challenges with caution and mindfulness. It’s essential to recognize what holds us back and take deliberate steps to unclamp ourselves from those influences. To illustrate this further, let’s consider a student who feels overwhelmed by academic pressures. They may feel 'clamped down' by expectations from parents, peers, and even themselves. To unclamp their mind, the student might engage in relaxation techniques, seek support from friends, or even speak with a counselor. By doing so, they create space for creativity and better decision-making, just as a technician creates space to work on a machine by unclamping the necessary components. In conclusion, the concept of unclamping extends beyond its literal meaning in mechanics. Whether in a workshop or in our personal lives, unclamping signifies the importance of releasing constraints to foster growth and improvement. As we learn to unclamp ourselves from various pressures, we pave the way for new opportunities and experiences. Thus, mastering the art of unclamping—both literally and metaphorically—can lead to a more fulfilling and productive life.

在工程和机械领域，术语unclamp指的是释放或移除固定两个或多个物体在一起的夹具的动作。这一动作在组装、维护和修理工作中至关重要。理解如何正确地unclamp一个物体可以显著影响项目的效率和安全性。例如，考虑一个技术人员需要更换机器中的某个部件的场景。第一步通常涉及将组件安全地夹紧在一起，以确保在操作期间的稳定性。然而，当维护时，技术人员必须小心翼翼地unclamp这些部件，以访问内部机制。unclamp的过程需要关注细节和对所涉及工具的清晰理解。如果草率行事，可能会导致对组件的错位或甚至损坏。因此，技术人员接受培训，以便在需要unclamp机械时遵循特定程序。他们可能会使用扳手或专门设计用于此目的的工具，确保施加适当的力量而不至于过度用力。此外，unclamp不仅限于机械应用；它还可以隐喻地应用于生活中的各种情况。例如，当我们谈论解放自己免受约束时，我们可能会说我们需要unclamp我们的思想，摆脱限制性信念或社会压力。从这个意义上说，unclamp代表着解放自己免受任何阻碍个人成长或创造力的东西。在日常生活中，我们遇到许多需要从消极思想或有毒关系中unclamp自己的情况。就像在机械应用中，必须小心unclamp以避免损坏一样，我们必须以谨慎和正念来面对这些个人挑战。识别出制约我们的因素并采取有意识的步骤来unclamp自己免受这些影响是至关重要的。为了进一步说明这一点，让我们考虑一个感到学业压力重重的学生。他们可能会觉得被父母、同龄人甚至自我期望“夹住”。为了unclamp他们的思维，这个学生可能会进行放松技巧、寻求朋友的支持，甚至与辅导员交谈。通过这样做，他们为创造力和更好的决策创造了空间，就像技术人员通过unclamp必要的组件来创建工作空间一样。总之，unclamp的概念超越了其在机械中的字面意义。无论是在车间还是在我们个人生活中，unclamp都象征着释放约束以促进成长和改善的重要性。当我们学习从各种压力中unclamp自己时，我们为新的机会和经历铺平了道路。因此，掌握unclamp的艺术——无论是字面上还是隐喻上——都可以导致更充实和高效的生活。