short hole method

简明释义

浅眼开采法

英英释义

例句

1.The short hole method 短孔法 is preferred in areas with limited access to heavy machinery.

在重型机械访问受限的地区，通常首选短孔法 短孔法。

2.The short hole method 短孔法 allows for precise placement of materials.

使用短孔法 短孔法可以精确放置材料。

3.Using the short hole method 短孔法 can significantly reduce the time needed for excavation.

使用短孔法 短孔法可以显著减少挖掘所需的时间。

4.The engineer explained the advantages of the short hole method 短孔法 in drilling operations.

工程师解释了在钻探作业中使用短孔法 短孔法的优点。

5.Our team decided to implement the short hole method 短孔法 for its efficiency and cost-effectiveness.

我们的团队决定实施短孔法 短孔法，因为它高效且具有成本效益。

作文

The short hole method is a technique commonly used in various fields, particularly in engineering and construction. This method involves creating a small, precise hole that serves a specific purpose, such as anchoring or guiding materials. The advantages of the short hole method are numerous, including increased accuracy, reduced material waste, and enhanced structural integrity. In this essay, I will explore the applications, benefits, and potential challenges associated with the short hole method. One of the primary applications of the short hole method is in the installation of fixtures and fittings. For instance, when installing shelves or cabinets, builders often use this technique to drill holes that are just deep enough to accommodate screws or anchors. This precision ensures that the fixtures are securely attached while minimizing damage to the surrounding material. Additionally, the short hole method can be employed in plumbing and electrical work, where small holes are necessary for routing pipes or wires through walls without compromising the structural integrity of the building. Another significant benefit of the short hole method is its ability to enhance safety. By using smaller holes, there is less risk of accidentally damaging nearby components or causing structural weaknesses. This is particularly important in high-stress environments, such as bridges or skyscrapers, where even minor errors can lead to catastrophic failures. Furthermore, the short hole method allows for better control during the drilling process, reducing the likelihood of slips and accidents. In addition to safety, the short hole method also contributes to cost-effectiveness. By minimizing the amount of material wasted during the drilling process, contractors can save money on both labor and materials. This is especially crucial in large-scale projects where every penny counts. Moreover, the efficiency of this method means that projects can be completed more quickly, further reducing overall costs. However, despite its many advantages, the short hole method does present some challenges. One of the primary concerns is the need for specialized tools and equipment. While basic drilling tools can be used for larger holes, the short hole method often requires more advanced machinery capable of achieving the necessary precision. This can lead to higher initial investment costs for contractors and may not be feasible for smaller projects. Additionally, the short hole method demands a higher level of skill and expertise from workers. Those who are not adequately trained may struggle to achieve the desired outcomes, leading to errors that could compromise the effectiveness of the technique. Therefore, it is essential for contractors to invest in training and development to ensure that their teams are equipped with the knowledge and skills required to utilize the short hole method effectively. In conclusion, the short hole method is a valuable technique in construction and engineering that offers numerous benefits, including increased accuracy, enhanced safety, and cost savings. While there are challenges associated with its implementation, the advantages often outweigh the drawbacks. As technology continues to advance, it is likely that the short hole method will become even more prevalent in various industries, paving the way for safer and more efficient construction practices.

短孔法是一种在各个领域中常用的技术，尤其是在工程和建筑中。这种方法涉及创建一个小而精确的孔，以服务于特定目的，例如锚固或引导材料。短孔法的优点很多，包括提高准确性、减少材料浪费和增强结构完整性。在这篇文章中，我将探讨短孔法的应用、益处以及可能面临的挑战。短孔法的主要应用之一是在安装固定装置和配件时。例如，在安装架子或橱柜时，建筑工人通常使用这种技术来钻孔，只需深到足以容纳螺钉或锚固物。这种精确性确保了固定装置牢固地附着，同时最小化对周围材料的损害。此外，短孔法还可以在管道和电气工作中使用，其中需要小孔以便在墙壁中引导管道或电缆，而不妨碍建筑的结构完整性。短孔法的另一个重要好处是能够增强安全性。通过使用较小的孔，意外损坏附近组件或造成结构弱点的风险减少。这在高应力环境中尤为重要，例如桥梁或摩天大楼，在这些地方，即使是微小的错误也可能导致灾难性的失败。此外，短孔法允许在钻孔过程中更好的控制，从而减少滑动和事故的可能性。除了安全性，短孔法还促进了成本效益。通过最小化钻孔过程中浪费的材料量，承包商可以节省劳动力和材料上的开支。这在大规模项目中尤为关键，因为每一分钱都很重要。此外，这种方法的高效性意味着项目可以更快完成，进一步降低总体成本。然而，尽管有很多优点，短孔法确实存在一些挑战。主要问题之一是对专业工具和设备的需求。虽然基本的钻孔工具可以用于较大的孔，但短孔法通常需要更先进的机械设备，以实现所需的精度。这可能导致承包商的初始投资成本较高，并且对于较小的项目可能不可行。此外，短孔法要求工人具备更高水平的技能和专业知识。那些没有充分培训的人可能会难以达到预期的结果，从而导致可能影响技术有效性的错误。因此，承包商必须投资于培训和发展，以确保他们的团队具备有效利用短孔法所需的知识和技能。总之，短孔法是建筑和工程中一种有价值的技术，提供了许多好处，包括提高准确性、增强安全性和节省成本。尽管实施过程中存在挑战，但优点往往超过缺点。随着技术的不断进步，短孔法在各个行业中的应用可能会变得更加普遍，为更安全和更高效的建筑实践铺平道路。