gross reduction ratio

简明释义

总破碎比

英英释义

例句

1.To assess the effectiveness of our waste management program, we calculated the gross reduction ratio 总减排率 for the last fiscal year.

为了评估我们的废物管理计划的有效性，我们计算了去年财政年度的gross reduction ratio 总减排率。

2.A higher gross reduction ratio 总减排率 indicates better performance in reducing carbon emissions.

更高的gross reduction ratio 总减排率表明在减少碳排放方面的表现更好。

3.The company reported a gross reduction ratio 总减排率 of 30% after implementing new energy-saving technologies.

公司在实施新节能技术后报告的gross reduction ratio 总减排率为30%。

4.During the audit, the team found that the gross reduction ratio 总减排率 had improved due to better recycling practices.

在审计期间，团队发现由于更好的回收实践，gross reduction ratio 总减排率有所改善。

5.The environmental report highlighted a significant increase in the gross reduction ratio 总减排率 compared to previous years.

环境报告强调与前几年相比，gross reduction ratio 总减排率显著增加。

作文

In the field of environmental science and resource management, understanding various metrics is crucial for assessing the effectiveness of conservation efforts. One such metric is the gross reduction ratio, which refers to the total amount of reduction in resource consumption or waste generation achieved over a specific period. This ratio plays a vital role in evaluating the success of sustainability initiatives and policies aimed at reducing environmental impact.The concept of gross reduction ratio can be applied in numerous contexts, such as energy consumption, water usage, and waste management. For instance, when a company implements new technologies to minimize energy use, the gross reduction ratio would measure the difference between the energy consumed before and after the implementation. A higher ratio indicates a more significant reduction in energy usage, showcasing the company's commitment to sustainability.Calculating the gross reduction ratio involves comparing the initial levels of resource consumption with the reduced levels after implementing specific strategies. This calculation provides a clear picture of how effective those strategies have been. For example, if a factory initially used 1,000 megawatt-hours of electricity per month and, after implementing energy-efficient practices, reduced its usage to 600 megawatt-hours, the gross reduction ratio would be 400 megawatt-hours, representing a 40% reduction.Understanding the gross reduction ratio is not only important for individual organizations but also for policymakers and environmentalists. By analyzing these ratios on a larger scale, governments can determine whether national or regional policies are effective in promoting sustainability. For instance, if a country sets a target to reduce carbon emissions by 30% over ten years, tracking the gross reduction ratio annually can help assess progress toward that goal.Moreover, the gross reduction ratio serves as a motivational tool for businesses and communities. When organizations see tangible results from their sustainability efforts, they are more likely to continue investing in eco-friendly practices. This positive feedback loop can lead to even greater reductions in resource consumption and waste generation over time.However, it is essential to approach the gross reduction ratio with a critical eye. While it is a valuable metric, it does not provide a complete picture of sustainability. For instance, a company might achieve a high gross reduction ratio by cutting back on energy use but may offset those gains by increasing production levels, leading to higher overall emissions. Therefore, it is crucial to consider other factors alongside the gross reduction ratio, such as the overall lifecycle impacts of products and services.In conclusion, the gross reduction ratio is a fundamental metric in assessing the effectiveness of sustainability initiatives across various sectors. It provides valuable insights into resource consumption and waste generation, helping organizations and policymakers make informed decisions. However, it should be used in conjunction with other metrics to ensure a comprehensive understanding of environmental impact. By continuing to focus on improving the gross reduction ratio, we can work towards a more sustainable future for our planet.

在环境科学和资源管理领域，理解各种指标对于评估保护工作效果至关重要。其中一个指标是总减排比率，它指的是在特定时间段内实现的资源消耗或废物产生的总减少量。这个比率在评估旨在减少环境影响的可持续发展倡议和政策的成功中发挥着至关重要的作用。总减排比率的概念可以应用于许多背景，例如能源消耗、水资源使用和废物管理。例如，当一家公司实施新技术以最小化能源使用时，总减排比率将衡量实施前后消耗的能量之间的差异。更高的比率表明能源使用的减少更显著，展示了公司对可持续发展的承诺。计算总减排比率涉及比较资源消耗的初始水平与实施特定策略后的减少水平。这一计算提供了这些策略有效性的清晰图景。例如，如果一家工厂最初每月使用1000兆瓦时的电力，而在实施节能措施后减少到600兆瓦时，则总减排比率为400兆瓦时，代表40%的减少。理解总减排比率不仅对个别组织重要，对政策制定者和环保人士也同样重要。通过分析这些比率，政府可以确定国家或地区政策在促进可持续发展方面的有效性。例如，如果一个国家设定目标在十年内减少30%的碳排放，年度跟踪总减排比率可以帮助评估朝该目标的进展。此外，总减排比率作为企业和社区的激励工具。当组织看到其可持续努力的切实成果时，他们更可能继续投资于环保实践。这种积极反馈循环可以导致随着时间的推移更大幅度的资源消耗和废物产生的减少。然而，必须批判性地看待总减排比率。虽然它是一个有价值的指标，但并不能提供可持续性的完整图景。例如，一家公司可能通过减少能源使用来获得高总减排比率，但可能通过增加生产水平来抵消这些收益，从而导致整体排放量的增加。因此，考虑其他因素与总减排比率一起使用至关重要，例如产品和服务的整体生命周期影响。总之，总减排比率是评估各个行业可持续发展倡议有效性的基本指标。它提供了有关资源消耗和废物产生的宝贵见解，帮助组织和政策制定者做出明智的决策。然而，它应与其他指标结合使用，以确保全面理解环境影响。通过继续关注改善总减排比率，我们可以为我们的星球创造一个更可持续的未来。