bent pipe

简明释义

弯管

英英释义

例句

1.The contractor warned us about the potential issues with the bent pipe in the foundation.

承包商警告我们基础中的弯曲的管道可能会引发潜在问题。

2.After inspecting the bent pipe, we realized it needed to be replaced immediately.

检查完这根弯曲的管道后，我们意识到它需要立即更换。

3.The plumber discovered a bent pipe in the basement that was causing the leak.

水管工在地下室发现了一根弯曲的管道，导致了漏水。

4.A bent pipe can disrupt the flow of water in your plumbing system.

一根弯曲的管道会干扰你管道系统中的水流。

5.To fix the issue, we had to cut out the bent pipe and install a new one.

为了解决这个问题，我们不得不切掉这根弯曲的管道并安装一根新的。

作文

In the world of engineering and construction, there are many challenges that professionals face every day. One such challenge is dealing with materials that may not always be in perfect condition. A common example of this is a bent pipe (弯曲的管道). When pipes are bent, whether due to external pressure, improper handling, or environmental factors, they can lead to significant issues in plumbing systems and industrial applications. Understanding the implications of a bent pipe (弯曲的管道) is crucial for anyone involved in these fields.A bent pipe (弯曲的管道) can compromise the flow of liquids or gases, causing blockages or leaks. For instance, in a water supply system, if a pipe is bent at a sharp angle, the water may struggle to flow through efficiently. This can result in reduced water pressure, which can affect households and businesses alike. Moreover, if the bend is severe enough, it could even cause the pipe to burst, leading to costly repairs and potential water damage.From an engineering perspective, the design and installation of piping systems must take into account the possibility of bends and curves. Engineers often use specific calculations to determine the best angles and materials to minimize the risk of encountering a bent pipe (弯曲的管道). They also consider the thermal expansion of materials, as pipes can bend when they expand due to heat. Proper installation techniques and regular maintenance checks are essential to ensure that pipes remain in good condition and to prevent them from becoming bent pipes (弯曲的管道).In industrial settings, the consequences of a bent pipe (弯曲的管道) can be even more severe. For example, in oil and gas industries, a bent pipe can lead to hazardous leaks that pose safety risks to workers and the environment. The integrity of the piping system is paramount, and companies must invest in high-quality materials and rigorous testing procedures to avoid the pitfalls associated with bent pipes (弯曲的管道).Additionally, the repair of a bent pipe (弯曲的管道) can be a challenging task. Depending on the severity of the bend, it may require cutting out the damaged section and replacing it, which can be time-consuming and expensive. In some cases, specialized tools are needed to straighten the pipe without causing further damage. This highlights the importance of proper training and knowledge for those who work with piping systems.In conclusion, understanding the concept of a bent pipe (弯曲的管道) is essential for professionals in various fields, especially in engineering and construction. The implications of having a bent pipe can range from minor inconveniences to major safety hazards. By prioritizing proper installation, maintenance, and repair techniques, we can mitigate the risks associated with bent pipes (弯曲的管道) and ensure the efficient operation of our plumbing and industrial systems. Knowledge about this issue not only helps in preventing problems but also contributes to the overall safety and functionality of our infrastructure.

在工程和建筑的世界中，专业人士每天面临着许多挑战。其中一个挑战是处理可能并不总是处于完美状态的材料。一个常见的例子就是弯曲的管道（bent pipe）。当管道因外部压力、不当处理或环境因素而弯曲时，它们可能会在管道系统和工业应用中导致重大问题。理解弯曲的管道（bent pipe）的影响对任何参与这些领域的人来说都是至关重要的。弯曲的管道（bent pipe）可能会妨碍液体或气体的流动，导致堵塞或泄漏。例如，在供水系统中，如果管道在一个尖锐的角度处弯曲，水可能会难以有效流动。这会导致水压降低，影响家庭和企业。此外，如果弯曲程度足够严重，甚至可能导致管道爆裂，从而导致昂贵的维修和潜在的水损害。从工程的角度来看，管道系统的设计和安装必须考虑到弯曲和曲线的可能性。工程师通常使用特定的计算来确定最佳角度和材料，以最小化遇到弯曲的管道（bent pipe）的风险。他们还考虑材料的热膨胀，因为管道在受热时可能会弯曲。适当的安装技术和定期的维护检查对于确保管道保持良好状态以及防止它们变成弯曲的管道（bent pipe）至关重要。在工业环境中，弯曲的管道（bent pipe）的后果可能更加严重。例如，在石油和天然气行业，弯曲的管道可能导致危险的泄漏，给工人和环境带来安全风险。管道系统的完整性至关重要，公司必须投资于高质量的材料和严格的测试程序，以避免与弯曲的管道（bent pipe）相关的陷阱。此外，修复弯曲的管道（bent pipe）可能是一项具有挑战性的任务。根据弯曲的严重程度，可能需要切除受损部分并进行更换，这可能耗时且费用高昂。在某些情况下，需要专门的工具来矫正管道，而不造成进一步的损坏。这突显了与管道系统打交道的人士需要具备适当的培训和知识的重要性。总之，理解弯曲的管道（bent pipe）的概念对于各个领域的专业人士尤其是在工程和建筑领域是必不可少的。拥有弯曲管道的影响可以从小的不便到重大的安全隐患。通过优先考虑适当的安装、维护和修理技术，我们可以减轻与弯曲的管道（bent pipe）相关的风险，并确保我们的管道和工业系统的高效运行。了解这一问题不仅有助于预防问题，还促进了我们基础设施的整体安全性和功能性。