working voltage

简明释义

工诅压

英英释义

例句

1.The device operates at a maximum working voltage of 240 volts.

该设备的最大工作电压为240伏特。

2.Check the manufacturer's specifications for the recommended working voltage.

查看制造商的规格以获取推荐的工作电压。

3.Ensure that the working voltage is compatible with your power supply.

确保工作电压与您的电源兼容。

4.Using a higher working voltage than specified can damage the equipment.

使用高于规定的工作电压可能会损坏设备。

5.The circuit can handle a working voltage of up to 600 volts.

该电路可以承受高达600伏特的工作电压。

作文

In the world of electronics and electrical engineering, understanding the concept of working voltage (工作电压) is crucial for designing and operating various devices. The term refers to the maximum voltage that a component or system can handle safely during its normal operation. This is an essential parameter because exceeding the working voltage (工作电压) can lead to catastrophic failures, including component damage, fire hazards, or even electrical shocks. When engineers design circuits, they must take into account the working voltage (工作电压) of each component involved. For instance, capacitors, resistors, and semiconductors all have specific working voltage (工作电压) ratings that indicate the highest voltage they can withstand without failing. If a capacitor rated for 10 volts is subjected to 15 volts, it may rupture or explode, causing damage to the circuit and potentially harming users. Therefore, it is vital to select components with appropriate working voltage (工作电压) ratings to ensure safety and reliability.Moreover, the working voltage (工作电压) can vary depending on the application. For example, in household appliances, the standard working voltage (工作电压) is typically 120V or 240V, depending on the region. However, in high-voltage transmission lines, the working voltage (工作电压) can reach tens or hundreds of thousands of volts. Engineers must carefully consider these differences when designing systems to avoid overvoltage conditions that could lead to failure.Another important aspect of working voltage (工作电压) is its relationship with the insulation materials used in electrical devices. Insulation must be rated for voltages higher than the working voltage (工作电压) to prevent electrical breakdown. For instance, if a wire operates at a working voltage (工作电压) of 230V, the insulation should be rated significantly higher, often around 300V or more, to provide a safe margin. This consideration helps to ensure that the device operates safely under all expected conditions.In addition to safety concerns, the working voltage (工作电压) also affects the performance of electronic devices. Higher voltages can lead to increased power consumption and heat generation, which can impact efficiency. Therefore, optimizing the working voltage (工作电压) is not only about safety but also about achieving the best performance from a device.In conclusion, the concept of working voltage (工作电压) plays a critical role in the design and operation of electrical and electronic systems. It is essential for ensuring safety, preventing equipment failure, and optimizing performance. Engineers must pay close attention to the working voltage (工作电压) ratings of components and the overall system to create reliable and efficient devices. By doing so, they can help to advance technology while ensuring the safety of users and the longevity of products.

在电子和电气工程的世界中，理解工作电压（工作电压）的概念对于设计和操作各种设备至关重要。这个术语指的是组件或系统在正常操作期间可以安全处理的最大电压。这是一个重要的参数，因为超过工作电压（工作电压）可能导致灾难性的故障，包括组件损坏、火灾隐患甚至电击。当工程师设计电路时，他们必须考虑每个组件的工作电压（工作电压）。例如，电容器、电阻器和半导体都有特定的工作电压（工作电压）额定值，指示它们在不失败的情况下可以承受的最高电压。如果一个额定为10伏的电容器承受15伏的电压，它可能会破裂或爆炸，造成电路损坏并可能危害用户。因此，选择具有适当工作电压（工作电压）额定值的组件是确保安全和可靠性的关键。此外，工作电压（工作电压）可能会根据应用而有所不同。例如，在家用电器中，标准的工作电压（工作电压）通常为120V或240V，具体取决于地区。然而，在高压输电线中，工作电压（工作电压）可以达到数万或数十万伏。工程师在设计系统时必须仔细考虑这些差异，以避免可能导致故障的过电压情况。工作电压（工作电压）的另一个重要方面是它与电气设备中使用的绝缘材料的关系。绝缘材料的额定电压必须高于工作电压（工作电压），以防止电气击穿。例如，如果一根电线在工作电压（工作电压）为230V的情况下运行，则绝缘材料的额定电压应明显更高，通常在300V或更高，以提供安全边际。这种考虑有助于确保设备在所有预期条件下安全运行。除了安全隐患之外，工作电压（工作电压）还影响电子设备的性能。较高的电压可能导致功耗和热量增加，这可能影响效率。因此，优化工作电压（工作电压）不仅关乎安全，还关乎实现设备最佳性能。总之，工作电压（工作电压）的概念在电气和电子系统的设计和操作中发挥着关键作用。它对于确保安全、防止设备故障和优化性能至关重要。工程师必须密切关注组件和整个系统的工作电压（工作电压）额定值，以创建可靠和高效的设备。通过这样做，他们可以帮助推动技术进步，同时确保用户的安全和产品的耐用性。